GAMEMAX H605-TA

GAMEMAX H605-TA Micro ATX PC Case User Manual

1. Produktet er slutview

The GAMEMAX H605-TA is a compact Micro ATX mid-tower PC case designed for users seeking a space-saving solution without compromising on aesthetics or functionality. It features 4mm tempered glass panels on the front and side, providing a clear view of internal components. The case includes three pre-installed RGB fans with addressable LEDs and a remote control for customizable lighting effects. Its robust 0.6mm chassis supports Micro ATX and ITX motherboards, offering ample space for essential components.

GAMEMAX H605-TA Micro ATX PC Case with tempered glass front and side panels

Figur 1: Forside og side view of the GAMEMAX H605-TA PC Case.

2. Opsætning og installation

This section provides instructions for installing your components into the GAMEMAX H605-TA PC case.

2.1 Forbindelser til frontpanel I/O

The front I/O panel provides convenient access to essential ports and controls. Connect these cables to the corresponding headers on your motherboard.

Detaljeret view of the front I/O panel showing power button, reset button, USB 2.0, USB 3.0, and audio jacks

Figure 2: Front I/O Panel Layout. Includes Power Button, Reset Button, Mic and HD Audio Interface, USB 2.0 ports, and USB 3.0 port.

  • Power knap: Used to power on/off the system.
  • Nulstil knap: Used to restart the system.
  • USB 2.0-porte (x2): Til tilslutning af USB 2.0-enheder.
  • USB 3.0-port (x1): For connecting USB 3.0 devices, offering faster data transfer.
  • Mic and HD Audio Interface: Til tilslutning af hovedtelefoner og mikrofoner.

2.2 Motherboard and Power Supply Installation

The H605-TA supports Micro ATX and ITX motherboards. The power supply unit (PSU) is mounted at the bottom of the case.

  1. Remove the side tempered glass panel by unscrewing the four thumb screws.
  2. Installer I/O-skjoldet, der fulgte med dit bundkort, i den bageste åbning af kabinettet.
  3. Carefully place your Micro ATX or ITX motherboard onto the standoffs inside the case and secure it with screws.
  4. Install your ATX power supply into the dedicated compartment at the bottom rear of the case and secure it with screws.
Indre view of the GAMEMAX H605-TA PC Case showing motherboard tray and PSU shroud

Figure 3: Internal layout of the case, highlighting the motherboard mounting area and PSU shroud.

2.3 Installation af drev

The case provides bays for both 3.5-inch HDDs and 2.5-inch SSDs.

  • 3.5-inch HDDs: Two internal drive bays are located beneath the PSU shroud. Slide your HDDs into the trays and secure them.
  • 2.5-inch SSDs: Two internal drive bays are available, typically mounted on the back of the motherboard tray or on the PSU shroud. Secure your SSDs with screws.
Bagerste indvendige view of the GAMEMAX H605-TA PC Case showing 3.5-inch drive bays

Figur 4: View of the internal 3.5-inch HDD drive bays (blue trays).

2.4 Installation af grafikkort

The case includes a support bracket for your graphics card to prevent sagging.

  1. Fjern de nødvendige PCI-slotdæksler fra bagsiden af ​​kabinettet.
  2. Insert your graphics card into the appropriate PCI-E slot on your motherboard and secure it with a screw.
  3. Adjust the graphics card support bracket to hold the card firmly in place.
Indre view of the GAMEMAX H605-TA PC Case highlighting the adjustable graphic card support bracket

Figure 5: Adjustable graphic card support bracket inside the case.

3. Betjeningsvejledning

Når alle komponenter er installeret og kabler er tilsluttet, kan du tænde dit system.

3.1 Tænd/sluk

Press the power button on the front I/O panel to turn on your computer. To turn it off, use the operating system's shutdown function or press and hold the power button for a few seconds.

3.2 RGB-blæserstyring

The GAMEMAX H605-TA includes three pre-installed RGB fans with addressable LEDs. These can be controlled using the provided remote control to adjust colors and lighting effects.

Side view of the GAMEMAX H605-TA PC Case with the RGB remote control shown in front

Figure 6: The included remote control for RGB fan customization.

  • Point the remote control towards the RGB controller inside the case.
  • Use the buttons on the remote to cycle through different colors, lighting modes, and adjust brightness or speed of effects.

4. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre optimal ydeevne og levetid for dit pc-kabinet og komponenter.

  • Støvfiltre: The top panel features a magnetic dust filter. Regularly remove and clean this filter to prevent dust buildup inside the case.
  • Hærdede glaspaneler: Clean the tempered glass panels with a soft, lint-free cloth and a glass cleaner. Avoid abrasive materials that could scratch the glass.
  • Indvendig rengøring: Periodically open the case and use compressed air to remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.

5. Fejlfinding

If you encounter issues with your PC case, consider the following basic troubleshooting steps:

  • Systemet tænder ikke:
    • Sørg for, at strømforsyningen er korrekt tilsluttet stikkontakten og tændt.
    • Verify that the power button cable from the front I/O panel is correctly connected to the motherboard's front panel header.
    • Check all internal power connections (24-pin ATX, CPU power, GPU power).
  • Ventilatorer drejer ikke / RGB virker ikke:
    • Ensure fan power cables are securely connected to the motherboard or fan controller.
    • Verify that the RGB controller is receiving power and that RGB cables are correctly connected to the fans.
    • Check the remote control battery if applicable.
  • USB-porte fungerer ikke:
    • Confirm that the USB headers from the front I/O panel are correctly plugged into the motherboard.

6. Specifikationer

FeatureSpecifikation
SagstypeMicro ATX Mid Tower
Dimensioner (H x B x D)410 mm x 193 mm x 390 mm
Chassis tykkelse0.6 mm
MaterialeTempered Glass (Front & Side), Steel
Bundkort supportMikro-ATX, ITX
PSU TypeATX (bundmontering)
Udvidelsesslots4 x PCI Slots
Drive Bays2 x 3.5" harddisk, 2 x 2.5" SSD
Front I / O-porte2 x USB 2.0, 1 x USB 3.0, 1 x PS/2 Audio, 1 x PS/2 Microphone
Forudinstallerede ventilatorerFront: 2 x 120mm RGB, Rear: 1 x 120mm RGB
Fan SupportForside: 2 x 120 mm, Bag: 1 x 120 mm
VandkølingsstøtteRear: 1 x 120mm Radiator
Særlige funktionerTempered Glass Panels, RGB Lighting with Remote Control, Magnetic Dust Filter, VGA Support Bracket

7. Garanti og support

7.1 Garantioplysninger

The GAMEMAX H605-TA PC Case comes with a 12 måneders garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og materialefejl ved normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller forkert installation.

7.2 Teknisk support

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the official GAMEMAX support channels. Please have your product model number (H605-TA) and proof of purchase ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.