TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Introduktion

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke. Hvis der mangler eller er beskadigede varer, bedes du kontakte din forhandler.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Strømadapter
• USB-mus
• Fjernbetjening
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Hurtig startvejledning

Figur 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden:

• Sørg for, at strømforsyningen voltage er korrekt, før du tilslutter NVR'en.
• Udsæt ikke NVR'en for vand eller fugt.
• Undgå at placere NVR'en i direkte sollys eller i nærheden af ​​varmekilder.
• Install the NVR in a well-ventilated area to prevent overheating.
• Åbn ikke NVR'en casing. Overlad al service til kvalificeret personale.
• Brug kun tilbehør specificeret af producenten.

3. Produktet er slutview

NVR Front and Rear Panels

Figur 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Front Panel Indicators and Controls:

• MAGT: Strømindikator.
• STATUS: Systemstatusindikator.
• Send/modtag: Data transmission/reception indicator.
• Kontrolknapper: For menu navigation and system control.
• USB-port: For mouse or USB storage device connection.

Bagpanelgrænseflader:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• LYD IND/UD: Til eksterne lydenheder.
• LAN-port: Connect to your network router/switch.
• HDMI udgang: Connect to a monitor for high-resolution video output (up to 4K).
• VGA udgang: Connect to a monitor for video output (up to 1080p).
• Strømindgang (48V): Tilslut den medfølgende strømadapter.
• Afbryderen: To turn the NVR on/off.

Nøglefunktioner

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Support live view, storage, and playback of connected cameras.

4. Opsætning

4.1 Installation af harddisk (valgfrit)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Skru af og fjern topdækslet på NVR'en.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Fastgør harddisken til NVR-kabinettet med de medfølgende skruer.
4. Sæt topdækslet på igen, og fastgør det med skruer.

4.2 Tilslutning af kameraer

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Figur 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Tilslut en skærm til NVR'ens HDMI- eller VGA-udgangsport.
• Tilslut en USB-mus til en af ​​NVR'ens USB-porte.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewing kapaciteter.

4.4 Tænd

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Betjeningsvejledning

5.1 Guide til indledende opsætning

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Live View

Efter den første opsætning viser NVR'en live-dataene view af tilsluttede kameraer. Du kan skifte mellem enkeltkamera-visning view og multikameragitter view using the on-screen controls or the remote control.

5.3 Optagelse

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Afspilning

Få adgang til optaget footage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Network Access and Remote Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Vedligeholdelse

6.1 Harddiskstyring

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 firmwareopdateringer

Tjek producentens website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Rengøring

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. Fejlfinding

• Ingen strøm:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Ingen videoudgang:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Kameraer viser ikke:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Ingen optagelse:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Problemer med fjernadgang:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web browserindstillinger.

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.