Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch User Manual

1. Produktet er slutview

This manual provides instructions for the installation and operation of the Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch. This device is designed for smooth, full-range dimming of white LED lighting using capacitive sensing technology. It features a small control unit and a 1-inch peel-and-stick stainless steel remote sensor disk, allowing for flexible placement and innovative control solutions for various lighting applications.

Image 1.1: Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch.

2. Sikkerhedsoplysninger

• Afbryd altid strømmen, før du installerer eller servicerer lysdæmperen.
• This product is intended for use with 12V or 24V DC LED lighting systems only.
• Overskrid ikke det maksimale wattage-værdi på 96 watt.
• Sørg for, at alle forbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.
• For best results, the Remote Touch LED Dimmer should be electrically isolated from other devices to prevent interference.
• Kontakt en kvalificeret elektriker, hvis du er usikker på nogen del af installationsprocessen.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• One (1) Armacost Lighting 511121 Remote Touch Dimmer Module
• One (1) 1-inch Peel-and-Stick Stainless Steel Remote Sensor Disk

Image 3.1: The dimmer module and the remote touch sensor disk.

4. Specifikationer

5. Opsætning og installation

Follow these steps for proper installation of your Remote Touch Dimmer:

1. Strømafbrydelse: Ensure all power to the lighting circuit is turned off at the breaker before beginning installation.
2. Tilslut til strømforsyning: Connect the dimmer module to a compatible 12V or 24V DC LED power supply (sold separately). Refer to the power supply's instructions for proper wiring.
3. Connect to LED Lighting: Connect the dimmer module's output to your Armacost Lighting RibbonFlex Pro White Tape Light or other compatible white LED lighting. This dimmer is specifically designed for white LED tape light.
4. Monter styreenhed: Mount the main control unit in a secure, accessible location, ensuring proper ventilation.
5. Mount Sensor Disk: The 1-inch peel-and-stick stainless steel remote sensor disk can be surface-mounted or countersunk for a flush installation. Place it in a convenient location where touch control is desired. The sensor disk connects to the control unit via a 48-inch thin wire lead.
6. Elektrisk isolering: For optimal performance and to prevent interference, ensure the Remote Touch LED Dimmer is electrically isolated from other devices.
7. Gendan strøm: Once all connections are secure and installation is complete, restore power to the circuit.

Image 5.1: Dimmer module showing input and output wiring terminals.

Billede 5.2: Detaljeret view of the touch sensor dimmer module and its remote disk.

6. Betjeningsvejledning

The Armacost Lighting 511121 Remote Touch Dimmer provides intuitive control over your LED lighting:

• Tænd/sluk: Simpelthen tryk the stainless steel sensor disk to turn the connected LED lights on or off.
• Dæmpning: For at justere lysstyrken, berør og hold the sensor disk. The lights will smoothly dim up or down. Release your finger when the desired brightness level is reached.
• Lysstyrkehukommelse: The dimmer features a memory function that saves the last brightness setting. When the lights are turned back on, they will return to the previously set level.

Billede 6.1: Eks.ample of under cabinet LED lighting, which can be controlled by the touch dimmer.

7. Vedligeholdelse

The Armacost Lighting 511121 Remote Touch Dimmer requires minimal maintenance:

• Rensning: Wipe the sensor disk and dimmer module with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or internal components.
• Inspektion: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de forbliver fastgjorte.
• Miljø: Ensure the dimmer module is not exposed to excessive moisture or extreme temperatures outside its operating range (32°F to 80°C).

8. Fejlfinding

If you encounter issues with your Remote Touch Dimmer, refer to the following common solutions:

• Lys tænder ikke:
  • Verify that the power supply is connected and receiving power.
  • Check all wiring connections between the power supply, dimmer module, and LED lighting.
  • Ensure the LED lighting is compatible with a 12V or 24V DC system and is not exceeding the dimmer's 96-watt capacity.
• Dimming Not Functioning Correctly:
  • Ensure the sensor disk is clean and free of obstructions.
  • Confirm the sensor disk's wire lead is securely connected to the dimmer module.
  • Check for any electrical interference from nearby devices; ensure the dimmer is electrically isolated.
• Intermitterende drift:
  • This dimmer is designed to work specifically with Armacost Lighting RibbonFlex Pro White Tape Light. Incompatibility with other LED products may cause issues.
  • Re-check electrical isolation as interference can cause erratic behavior.

9. Garanti og support

The Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch comes with a Begrænset et-års garanti. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For technical support, warranty claims, or additional product information, please contact Armacost Lighting directly. Refer to the official Armacost Lighting webwebstedet eller produktemballagen for aktuelle kontaktoplysninger.