Indledning
This manual provides essential instructions for the safe and efficient operation of your American DJ COLOR STAND LED REMOTE Stage Lighting Controller. This device is designed to provide versatile lighting control for various stage and event applications, featuring 20 individual RGBW bulbs and wireless remote control capabilities. Please read this manual thoroughly before use and retain it for future reference.
Sikkerhedsoplysninger
For at mindske risikoen for elektrisk stød, brand eller personskade skal du altid følge disse grundlæggende sikkerhedsforanstaltninger:
- Læs alle instruktioner: Gør dig bekendt med produktets funktioner og betjening inden brug.
- Strømkilde: Connect the unit only to a grounded AC power outlet with the specified voltage.
- Fugtighed: Udsæt ikke enheden for regn eller fugt. Brug den ikke i nærheden af vand.
- Varme: Hold enheden væk fra varmekilder såsom radiatorer, varmeregistreringsapparater, komfurer eller andre apparater, der producerer varme.
- Ventilation: Sørg for tilstrækkelig ventilation. Bloker ikke ventilationsåbninger.
- Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.
- Rensning: Tag stikket ud af stikkontakten før rengøring. Brug kun en tør klud.
Pakkens indhold
Please check the contents of your product box to ensure all items are present and in good condition:
- American DJ COLOR STAND LED REMOTE Stage Lysstyring
- Trådløs fjernbetjening
- Power Cable (Corded Electric)
- Brugervejledning (dette dokument)
Opsætning
- Udpakning: Fjern forsigtigt alle komponenter fra emballagen.
- Placering: Position the COLOR STAND LED REMOTE on a stable, level surface. This unit is designed for floor mount applications. Ensure adequate space around the unit for ventilation.
- Strømtilslutning: Connect the provided power cable to the unit's power input and then to a suitable grounded AC power outlet.
- Fjernbetjening: Ensure the wireless remote control has functional batteries (not included).
Image: The American DJ COLOR STAND LED REMOTE Stage Lighting Controller, showcasing its compact design and remote. This image illustrates the product's appearance and typical setup.
Betjeningsvejledning
The COLOR STAND LED REMOTE offers various lighting effects and controls via its wireless remote.
Grundlæggende betjening:
- Tænd/sluk: Use the designated power button on the remote control to turn the unit on or off.
- Farvevalg: The unit features 20 individual RGBW bulbs. Use the color selection buttons on the remote to choose from a wide spectrum of colors.
- Justering af lysstyrke: Adjust the intensity of the lights using the brightness control buttons on the remote.
- Hastighedstilpasning: For dynamic lighting modes, use the speed adjustment buttons to control the transition speed of colors or effects.
Avancerede funktioner:
- Color-Changing Modes: Activate pre-programmed color-changing sequences. Refer to the remote's specific buttons for these modes.
- Demo Program Mode: Engage the demo mode to cycle through various built-in lighting programs, showcasing the unit's capabilities.
Note: Ensure the remote control is pointed towards the front of the lighting controller for optimal signal reception.
Opretholdelse
Proper maintenance ensures the longevity and optimal performance of your lighting controller.
- Rensning: Regularly clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
- Ventilation: Hold ventilationsåbningerne fri for støv og snavs for at forhindre overophedning.
- Opbevaring: Når enheden ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
- Kabelinspektion: Periodically inspect the power cable for any signs of damage. If damaged, replace it with an approved cable.
Fejlfinding
If you encounter issues with your COLOR STAND LED REMOTE, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | No power supply; faulty power cable; unit malfunction. | Check power cable connection to unit and outlet. Ensure outlet is functional. Try a different power cable if available. If problem persists, contact support. |
| Fjernbetjeningen reagerer ikke. | Løse batterier; fjernbetjening uden for rækkevidde; blokering mellem fjernbetjening og enhed. | Replace remote control batteries. Ensure remote is within effective range and pointed directly at the unit. Remove any obstructions. |
| Lights are not changing color or responding to commands. | Remote signal issue; unit in a fixed mode. | Verify remote functionality (see above). Try cycling the power to the unit. Ensure no other devices are interfering with the remote signal. |
If the problem persists after attempting these solutions, please contact American DJ customer support.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | COLOR STAND LED REMOTE |
| Mærke | adj |
| Farve | RGBW |
| Form | Rektangulær |
| Lyskildetype | Lysdiode |
| Skærmmateriale | Metal |
| Strømkilde | Elektrisk med ledning |
| Stil | Moderne |
| Monteringstype | Gulvmontering |
| Pærefunktioner | Color-changing, Remote Control, Speed Adjustable, Brightness Adjustment, Demo Program Mode |
| Antal lyskilder | 20 |
| Batterier medfølger | Ingen |
| Produktdimensioner | 6 cm L x 3.5 cm B x 2.5 cm H |
| Varens vægt | 0.81 ounce |
| UPC | 818651024524 |
| ASIN | B07D9GC52Q |
Garanti og support
For warranty information and technical support, please refer to the official American DJ webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
Fabrikant: American DJ Group of Companies
Webwebsted: www.adj.com (Eksamplinket, bekræft venligst det officielle webwebsted)