Flysky FS-iA6B Receiver User Manual

1. Introduktion

The Flysky FS-iA6B is a compact and reliable 6-channel 2.4G receiver designed for various RC models, including airplanes, gliders, and helicopters. It features i-BUS and data acquisition interfaces, offering versatile connectivity options for your remote control systems.

Pakkeindhold:

• 1x Flysky FS-iA6B 6CH Receiver
• 1x Bindprop
• 1x 25cm Lipo Battery Strap

Figur 1: Contents of the Flysky FS-iA6B receiver package, including the receiver unit, a bind plug, and a Lipo battery strap.

2. Specifikationer

Figur 2: Physical dimensions of the Flysky FS-iA6B receiver, showing its compact size.

3. Opsætningsvejledning

3.1. Tilslutning af modtageren

Connect the receiver to your flight controller or servos using the appropriate cables. Ensure correct polarity when connecting power to the B/VCC port. The receiver operates on 4.0-6.5V DC.

Figur 3: The FS-iA6B receiver with its dual antennas properly connected, ready for installation.

3.2. Binding the Receiver to a Transmitter

To establish communication between the receiver and your Flysky transmitter, follow these binding steps:

1. Sørg for, at din sender er slukket.
2. Insert the provided bind plug into the B/VCC port on the FS-iA6B receiver.


Figur 4: Nærbillede view of the receiver's ports, showing the bind plug inserted into the B/VCC port for binding.

3. Apply power to the receiver (e.g., connect to a flight controller or a 4.0-6.5V DC power source). The LED on the receiver should start flashing rapidly, indicating it is in binding mode.
4. Turn on your compatible Flysky transmitter (e.g., FS-i6, FS-i10) and navigate to the binding function in its menu.
5. Start bindingsprocessen på senderen.
6. Once binding is successful, the LED on the receiver will stop flashing and remain solid.
7. Turn off the receiver's power, then remove the bind plug.
8. Sluk din sender.
9. Reconnect power to the receiver and then turn on your transmitter. The receiver LED should be solid, indicating a successful connection.

Note: Always remove the bind plug after successful binding to prevent the receiver from entering binding mode unintentionally during subsequent power-ups.

3.3. Kompatible sendere

The FS-iA6B receiver is compatible with a range of Flysky transmitters, including:

• FS-i4
• FS-i6
• FS-i10
• FS-GT2E
• FS-GT2G

Figur 5: A compatibility chart illustrating which Flysky transmitters are compatible with various receivers, including the FS-iA6B.

4. Betjening af modtageren

The FS-iA6B receiver supports both PPM (Pulse Position Modulation) and i-BUS (Intelligent Bus) outputs, providing flexibility for different flight controllers and setups.

4.1. PPM Output

PPM combines all channel data into a single signal wire, simplifying wiring to your flight controller. The PPM/CH1 port on the receiver typically outputs the PPM signal.

4.2. i-BUS Output

i-BUS is a digital serial bus system that allows for multiple channels and telemetry data to be transmitted over a single wire. This can reduce wiring clutter and improve signal integrity. The i-BUS port on the receiver is dedicated for this purpose.

4.3. Channel Assignment

The receiver provides 6 physical channels (CH1-CH6) for connecting servos or other components. Ensure your flight controller or servo connections match the channel assignments configured on your transmitter.

5. Vedligeholdelse

• Hold tør: Protect the receiver from moisture and humidity, as water can damage electronic components.
• Undgå ekstreme temperaturer: Do not expose the receiver to excessively high or low temperatures.
• Rengør forsigtigt: Hvis rengøring er nødvendig, skal du bruge en blød, tør klud. Undgå at bruge opløsningsmidler eller skrappe kemikalier.
• Sikre antenner: Ensure the dual antennas are securely mounted and positioned for optimal signal reception. Avoid bending them sharply.
• Undersøg forbindelser: Periodically check all wiring and connections for signs of wear, corrosion, or looseness.

6. Fejlfinding

7. Garanti og support

This product is manufactured by FPVKing. For any issues or support inquiries, please refer to the seller's contact information or the platform where the product was purchased.

The manufacturer provides customer service and support. If you encounter any problems, please do not hesitate to contact customer service for assistance.