Youshiko YK YC8025-B Radiostyret vægur (UK version) Brugsanvisning

Indledning

This manual provides detailed instructions for the setup, operation, and maintenance of your Youshiko YK YC8025-B Radio Controlled Wall Clock. This clock is designed for precise timekeeping, automatically adjusting for seasonal changes and receiving time signals specific to the UK and Ireland (MSF).

The clock features a large LCD display showing time in 12/24 hour format, date, month, day of the week, indoor temperature (Celsius or Fahrenheit), and moon phase. It also includes an alarm with a snooze function.

Figur 1: Front view of the Youshiko YK YC8025-B Radio Controlled Wall Clock. The large LCD screen displays the current time, date, day of the week, indoor temperature, and moon phase.

Opsætning

1. Batteriinstallation

1. Find batteridækslet på bagsiden af ​​uret.
2. Fjern dækslet.
3. Insert the required batteries (not included) according to the polarity markings (+ and -) inside the compartment.
4. Sæt batterirummets dæksel på igen.

Figur 2: Bag view of the clock, showing the battery compartment and control buttons (SET, ALARM, UP, DOWN, SNOOZE, WAVE).

2. Indledende signalmodtagelse

After battery installation, the clock will automatically begin searching for the radio time signal. This clock is designed for the UK and Ireland (MSF signal).

• Place the clock near a window or in an open area to optimize signal reception.
• The signal reception icon (often a tower with waves) on the display will flash during the search.
• Once the signal is successfully received, the clock will automatically set the correct time, date, and day, and the signal icon will become solid. This process may take several minutes.

Note: For optimal signal reception, avoid placing the clock near electronic devices that may cause interference.

Figur 3: Explanation of radio control systems. The Youshiko YK YC8025-B uses the MSF signal for the UK and Ireland.

Betjeningsvejledning

1. Vis oplysninger

Det store LCD-display viser følgende oplysninger:

• Tid: Current time in 12-hour (with AM/PM indicator) or 24-hour format.
• Dato: Dag og måned.
• Ugens dag: Forkortet dagsnavn.
• Indendørs temperatur: Measured in Celsius (°C) or Fahrenheit (°F).
• Månefase: Graphical representation of the current moon phase.
• Signalikon: Indicates radio signal reception status.
• Alarmikon: Angiver om alarmen er aktiv.

2. Setting Time and Date Manually (if needed)

While the clock is radio-controlled, manual adjustments may be necessary in certain situations (e.g., outside signal range).

1. Tryk og hold på SÆT knappen, indtil displayet begynder at blinke.
2. Brug UP or NED knapper til at justere den blinkende værdi (f.eks. time, minut, år, måned, dag).
3. Trykke SÆT again to confirm the setting and move to the next adjustable item.
4. Repeat until all desired settings are configured. The clock will exit setup mode automatically after a period of inactivity or by pressing SÆT gentagne gange, indtil det normale display vender tilbage.

3. 12/24 Hour Format and Temperature Unit

• To switch between 12-hour and 24-hour time format, press the UP button during normal time display.
• To switch between Celsius (°C) and Fahrenheit (°F) for temperature display, press the NED button during normal time display.

4. Alarm Setting and Snooze

1. Tryk på ALARM knappen én gang for at vise det aktuelle alarmtidspunkt.
2. Tryk og hold på ALARM knappen, indtil alarmtidspunktet begynder at blinke.
3. Brug UP or NED buttons to adjust the alarm hour and then the alarm minute.
4. Trykke ALARM again to confirm and activate the alarm. The alarm icon will appear on the display.
5. Når alarmen lyder, skal du trykke på SLUM knappen for midlertidigt at slå den fra. Alarmen lyder igen efter et par minutter.
6. For at slukke alarmen helt, tryk på en hvilken som helst anden knap (f.eks. ALARM, SÆT) when it is sounding or when the snooze is active.

5. Manual Signal Search

If the clock fails to receive the radio signal automatically, you can initiate a manual search.

• Tryk på BØLGE knap.
• The signal icon will flash, indicating the clock is searching for the radio signal.
• Allow several minutes for the clock to attempt synchronization.

Opretholdelse

1. Udskiftning af batteri

When the display becomes dim or the clock stops functioning, it is time to replace the batteries.

1. Åbn batterirummet på bagsiden af ​​uret.
2. Fjern de gamle batterier.
3. Indsæt nye batterier, og sørg for korrekt polaritet.
4. Close the battery compartment. The clock will then attempt to re-synchronize with the radio signal.

2. Rensning

• Tør urets overflade af med en blød, tør klud.
• Do not use abrasive cleaners or chemical solvents, as these can damage the display or casing.

Fejlfinding

• No Time Display / Incorrect Time:
  • Sørg for, at batterierne er korrekt installeret og ikke er afladede. Udskift dem om nødvendigt.
  • Check signal reception. Move the clock to a location with better reception, away from electronic interference.
  • Start en manuel signalsøgning ved at trykke på BØLGE knap.
  • Verify that you are within the MSF signal range (UK and Ireland).
• Dim display:
  • Udskift batterierne med nye.
• Alarmen lyder ikke:
  • Ensure the alarm is activated (alarm icon visible on display).
  • Check that the alarm time is set correctly.

Specifikationer

Figur 4: Dimensions of the Youshiko YK YC8025-B Radio Controlled Wall Clock.