SKYTECH ST-194D digitalradio brugermanual

1. Introduktion

Tak for købetasing the SKYTECH ST-194D Digital Radio. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new radio. Please read this manual thoroughly before using the device to ensure optimal performance and longevity. Keep this manual for future reference.

2. Sikkerhedsoplysninger

For at sikre sikker drift og forhindre skader, bedes du overholde følgende forholdsregler:

• Udsæt ikke radioen for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
• Undgå at tabe eller udsætte enheden for kraftige stød.
• Forsøg ikke at skille radioen ad eller ændre den. Dette vil ugyldiggøre garantien og kan forårsage skade.
• Use only the specified battery type (if applicable) and ensure correct polarity during installation.
• Hold enheden væk fra vand eller andre væsker.
• Rengør radioen med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.

3. Pakkens indhold

Tjek venligst pakken for følgende varer:

• SKYTECH ST-194D Digital Radio
• Brugervejledning (dette dokument)

Note: Batteries may not be included and might need to be purchased separately.

4. Produktet er slutview

Familiarize yourself with the components and controls of your SKYTECH ST-194D Digital Radio.

Figur 1: Front view of the SKYTECH ST-194D Digital Radio. The image displays the silver-colored radio with its telescopic antenna extended. On the front, a speaker grille is visible on the left, and a digital display with control buttons is on the right. Below the display are buttons for alarm and time settings, along with switches for DX/Local reception and AM/FM band selection. A black wrist strap is attached to the side.

Kontrol og funktioner:

• Teleskopantenne: For forbedret radiosignalmodtagelse.
• Højttalergitter: Lydudgang.
• Digital skærm: Shows time, frequency, and alarm status.
• AL SET Button: Bruges til at indstille alarmtidspunktet.
• TIME-knap: Adjusts the hour for time and alarm settings.
• OFF knap: Powers off the radio.
• Knap til INDSTILLING AF TID: Bruges til at indstille den aktuelle tid.
• MIN knap: Adjusts the minute for time and alarm settings.
• AL TIL/FRA-knap: Slår alarmfunktionen til eller fra.
• TUNE Button: Justerer radiofrekvensen.
• DX.LOCAL Switch: Selects between distant (DX) and local signal reception.
• AM ON Switch: Activates the AM radio band.
• FM ON Switch: Activates the FM radio band.
• Håndledsrem: For portable carrying.

5. Opsætning

5.1 Batteriinstallation

The SKYTECH ST-194D is battery-powered. To install batteries:

1. Locate the battery compartment cover on the back or side of the radio.
2. Skub eller afklips dækslet for at åbne rummet.
3. Insert the required batteries (e.g., AA or AAA, check compartment for type) according to the polarity indicators (+ and -).
4. Luk batterirummets dæksel forsvarligt.

Note: Ensure batteries are inserted correctly. Incorrect installation can damage the device.

6. Betjeningsvejledning

6.1 Tænd/sluk

• To power on the radio, ensure batteries are installed and slide the AM ON or FM TIL skifte til 'ON'-positionen.
• To power off the radio, press the SLUKKET knap.

6.2 Tuning the Radio (FM Band)

The SKYTECH ST-194D supports FM radio reception.

1. Træk teleskopantennen ud for optimal modtagelse.
2. Skub til FM TIL skifte til 'ON'-positionen.
3. Brug TUNE button to scan for and select your desired FM station. The frequency will be displayed on the digital screen.
4. Adjust the antenna position for the clearest signal.

6.3 Indstilling af klokkeslæt

1. Tryk og hold på TIDSINDSTILLING knappen, indtil timevisningen begynder at blinke.
2. Tryk på TIME knappen for at justere timen.
3. Tryk på TIDSINDSTILLING button again, and the minute display will flash.
4. Tryk på MIN knappen for at justere minutter.
5. Trykke TIDSINDSTILLING endnu en gang for at bekræfte og afslutte tidsindstillingstilstanden.

6.4 Indstilling af alarmen

1. Tryk og hold på AL SET button until the alarm hour display starts flashing.
2. Tryk på TIME knappen for at justere alarmtiden.
3. Tryk på AL SET button again, and the alarm minute display will flash.
4. Tryk på MIN knappen for at justere alarmminut.
5. Trykke AL SET endnu en gang for at bekræfte og afslutte alarmindstillingstilstand.
6. For at aktivere eller deaktivere alarmen skal du trykke på AL TIL/FRA button. An alarm icon will typically appear on the display when the alarm is active.

6.5 DX.LOCAL Switch

De DX.LOCAL switch helps optimize reception:

• Indstil til LOKAL for strong, nearby radio stations. This setting helps reduce interference from distant signals.
• Indstil til DX (Distant) for weaker, far-away radio stations. This setting increases sensitivity to pick up fainter signals.

7. Vedligeholdelse

7.1 Rengøring

Wipe the radio with a soft, dry cloth. Do not use liquid cleaners, aerosols, or solvents, as these may damage the surface or internal components.

7.2 Pleje af batterier

• Fjern batterierne, hvis radioen ikke skal bruges i længere tid, for at forhindre lækage.
• Bortskaf brugte batterier ansvarligt i henhold til lokale regler.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

This product is designed for reliability and performance. For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.