Geberit 500.620.01.2

Geberit Keramag Acanto Bathroom Wash Basin

Model: 500.620.01.2

1. Produktet er slutview

The Geberit Keramag Acanto wash basin, model 500.620.01.2, is a modern bathroom fixture designed for countertop installation. It features an integrated overflow and a pre-drilled tap hole, making it suitable for various faucet configurations. The basin measures 600 x 480 mm and is finished in white with KeraTect, a special ceramic glaze for enhanced durability and hygiene.

Nøglefunktioner:

  • Integreret overløb: Prevents water from spilling over the basin kant.
  • Single Tap Hole: Designed for a single-lever mixer or similar faucet.
  • Dimensioner: 600 mm width x 480 mm depth.
  • KeraTect Finish: A durable, easy-to-clean ceramic surface.
  • Kompatibilitet: Can be combined with Acanto vanity units (e.g., 500.609.01.2, 500.609.16.1).
Keramag Acanto wash basin installed with a faucet and drain

Figure 1: The Keramag Acanto wash basin, visasing its modern design and integrated faucet.

Keramag Acanto wash basin installed on a white vanity unit

Figure 2: The wash basin seamlessly integrated with a compatible vanity unit.

2. Opsætning og installation

This section provides general guidelines for the installation of the Keramag Acanto wash basin. Professional installation is recommended. Ensure all local plumbing codes are followed.

2.1. Før du begynder

  • Inspect the Basin: Kontroller for eventuelle skader før installation.
  • Saml værktøjer: You will need standard plumbing tools, sealant, and mounting hardware (if not included).
  • Sluk for vandforsyningen: Sørg for, at hovedvandforsyningen til installationsområdet er slukket.

2.2. Installationstrin

  1. Placering: Placer forsigtigt vaskebasin on the desired countertop or vanity unit. Ensure it is level and aligned.
  2. Mærkning: Mark the positions for the drain and faucet holes on the countertop if not pre-drilled. Refer to the dimension drawings for precise measurements.
  3. Vandhane installation: Install the faucet into the basin's tap hole according to the faucet manufacturer's instructions. Connect the hot and cold water supply lines.
  4. Afløbsmontering: Install the pop-up drain assembly into the basin's drain hole. Apply plumber's putty or silicone sealant as required to ensure a watertight seal.
  5. Tilslutning af afløb: Connect the drain assembly to the P-trap and the main waste pipe. Ensure all connections are tight and leak-free.
  6. Sikring af Basin: Apply a bead of silicone sealant around the base of the basin where it meets the countertop to secure it and prevent water ingress.
  7. Vandforsyning: Turn on the main water supply and check for any leaks at the faucet and drain connections.
Top-down technical drawing of the Keramag Acanto wash basin med dimensioner

Figur 3: Top-down view with key dimensions for installation planning.

Side view technical drawing of the Keramag Acanto wash basin med dimensioner

Figur 4: Side view with depth and height dimensions.

Front view technical drawing of the Keramag Acanto wash basin med dimensioner

Figur 5: Forside view with width and drain placement dimensions.

3. Betjeningsvejledning

The Keramag Acanto wash basin is designed for standard bathroom use. Operate the faucet according to its manufacturer's instructions to control water flow and temperature.

  • Vandflow: Adjust the faucet handle to achieve the desired water flow.
  • Temperaturkontrol: Mix hot and cold water to reach a comfortable temperature.
  • Overløbsfunktion: The integrated overflow is designed to prevent minor overfilling. Do not rely on it as a primary means of preventing floods. Always monitor water levels when filling the basin.
  • Afløbsdrift: Use the pop-up drain mechanism to open or close the drain as needed.

4. Pleje og vedligeholdelse

Proper care will ensure the longevity and pristine appearance of your Keramag Acanto wash basin, especially with its KeraTect finish.

4.1. Daglig rengøring

  • Wipe the basin med en blød, damp cloth after each use to prevent water spots and soap residue buildup.
  • For general cleaning, use mild soap or a non-abrasive bathroom cleaner diluted with water.
  • Rinse thoroughly with clean water and dry with a soft cloth to maintain shine.

4.2. KeraTect Finish Care

The KeraTect ceramic glaze is highly durable and hygienic. To preserve its properties:

  • Undgå slibemidler: Do not use abrasive cleaners, scouring pads, or harsh chemicals (e.g., strong acids, alkalis, or bleach) as these can damage the KeraTect surface.
  • Pletfjernelse: For stubborn stains, use a ceramic-safe cleaner and a soft sponge. Always test in an inconspicuous area first.

4.3. Drain Maintenance

  • Regularly remove hair and debris from the drain to prevent clogs.
  • If a clog occurs, use a plumbing snake or a chemical drain cleaner specifically designed for bathroom drains. Follow product instructions carefully.

5. Fejlfinding

This section addresses common issues you might encounter with your wash basin.

ProblemMulig årsagLøsning
Langsom dræningHår eller snavs ophobet i afløbet.Remove the pop-up stopper and clear any obstructions. Use a drain cleaner if necessary.
Leaks Around Faucet BaseLoose faucet connections or worn seals.Tighten faucet mounting nuts. Replace O-rings or gaskets if worn.
Leaks Under Basin (P-trap)Loose P-trap connections or damaged seals.Tighten slip nuts on the P-trap. Inspect and replace rubber washers if cracked or worn.
Vandpletter/-pletterHard water deposits or soap residue.Clean regularly with a mild, non-abrasive cleaner. For hard water, use a vinegar solution (diluted) and rinse thoroughly.

6. Produktspecifikationer

Detailed technical specifications for the Geberit Keramag Acanto wash basin.

  • Mærke: Geberit
  • Fabrikant: Keramag
  • Modelnummer: 500.620.01.2
  • Farve: Hvid
  • Stil: Moderne
  • Installationstype: Bordplade
  • Udfør type: Brushed (referring to the overall aesthetic, not the ceramic surface)
  • Varens vægt: 15.5 kilo
  • Base bredde: 600 millimeter
  • Form: Rektangulær
  • Afløbstype: Pop-up
  • Funktioner: With overflow, with tap hole, KeraTect White finish

7. Garanti og support

7.1. Garantioplysninger

Specific warranty details for the Geberit Keramag Acanto wash basin are typically provided at the point of purchase or can be found on the official Geberit or Keramag webwebsted. Gem venligst din købsbevis til garantikrav.

7.2. Kundesupport

For technical assistance, spare parts, or further inquiries, please contact Geberit customer service. Contact information can usually be found on the manufacturer's official webstedet eller i emballagematerialerne.

© 2023 Geberit. Alle rettigheder forbeholdes.