MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch User Manual

Indledning

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of the MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch. This device is designed for industrial networking applications, offering 8 10/100/1000BaseT PoE/PoE+ ports and 4 100/1000BaseSFP slots, capable of operating in harsh environments from -40 to 75°C.

Læs venligst denne manual grundigt, inden du bruger enheden, for at sikre korrekt funktionalitet og sikkerhed.

Pakkens indhold

• MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch
• Hurtig installationsvejledning
• Garantikort
• Monteringssæt (hvis relevant)

Verify all items are present and undamaged. Contact your vendor if any items are missing or damaged.

Opsætning

1. Fysisk installation

The EDS-G512E-8PoE-4GSFP-T switch is designed for DIN-rail or wall mounting. Ensure the installation location provides adequate ventilation and is within the specified operating temperature range (-40 to 75°C).

Figur 1: Forside view of the MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch, showing the 8 PoE ports and 4 SFP slots.

2. Strømtilslutning

Connect a 48 VDC power source to the terminal block on the switch. Ensure correct polarity. The switch supports redundant power inputs for enhanced reliability. Refer to the Quick Installation Guide for detailed wiring diagrams.

• Input bindtage: 48 VDC
• Redundans: Dual power inputs

3. Netværksforbindelse

Connect Ethernet cables to the 10/100/1000BaseT PoE/PoE+ ports for standard network devices and PoE-powered devices. Insert SFP modules into the 100/1000BaseSFP slots for fiber optic connections. Ensure SFP modules are compatible with the switch and your fiber infrastructure.

• PoE-porte: 8 x 10/100/1000BaseT (PoE/PoE+)
• SFP-pladser: 4 x 100/1000BaseSFP

Drift

1. Tænder

Once power is connected, the switch will automatically power on. Observe the power LED indicators to confirm proper power supply.

2. LED-indikatorer

The switch features various LED indicators to display its status and port activity:

• PWR1/PWR2: Indicates power status for input 1 and 2. (Green: Power OK, Off: No Power)
• FEJL: Indicates system fault. (Red: Fault detected, Off: No fault)
• MSTR/CPLR: Indicates redundant ring status.
• Port LEDs (Link/Act): Indicates link status and data activity for each port. (Green: Link established, Blinking Green: Data activity, Off: No link)
• PoE LED'er: Indicates PoE power status for PoE ports. (Green: PoE power supplied, Off: No PoE power)

3. Netværksstyring

The EDS-G512E-8PoE-4GSFP-T is a managed switch. It can be configured and monitored via a web-based interface, Telnet/SSH, or SNMP. Refer to the product's software manual for detailed instructions on accessing and configuring the management interface.

• Standard IP-adresse: Consult the Quick Installation Guide or product documentation.
• Standard brugernavn/adgangskode: Consult the Quick Installation Guide or product documentation.

Opretholdelse

1. Rensning

Rengør jævnligt ydersiden af ​​kontakten med en blød, tør klud. Brug ikke flydende rengøringsmidler eller aerosolrengøringsmidler. Sørg for, at enheden er slukket, før du rengør den.

2. Firmwareopdateringer

Kontroller regelmæssigt producentens website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware package carefully.

3. Miljøhensyn

Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage and ensure optimal performance.

Fejlfinding

1. Ingen strøm

• Check power cable connections to the switch and power source.
• Kontroller, at strømkilden er aktiv og leverer den korrekte lydstyrke.tage (48 VDC).
• Check the PWR1/PWR2 LEDs on the switch.

2. Ingen netværksforbindelse

• Ensure Ethernet cables are securely connected to both the switch and the network device.
• Check the Link/Act LEDs for the respective port. A solid green indicates a link, blinking indicates activity.
• Verify network settings on connected devices.

3. PoE-enhed tænder ikke

• Ensure the connected device is PoE compatible.
• Check the PoE LED for the specific port. A solid green indicates PoE power is being supplied.
• Verify the total power budget of the switch is not exceeded.

4. System Fault (FAULT LED is Red)

If the FAULT LED is red, consult the product's software manual or contact technical support for advanced diagnostics.

Specifikationer

Garanti og support

Garantioplysninger

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in the package or visit the official Moxa webhjemmeside for detaljerede garantivilkår.

Teknisk support

For technical assistance, product documentation, or software downloads, please visit the official Moxa support website. You may also contact Moxa customer service directly for further assistance.

Moxa Official Webwebsted: www.moxa.com