Bluedio T5 Active Noise Cancelling Wireless Bluetooth Headphones User Manual

Indledning

Thank you for choosing the Bluedio T5 Active Noise Cancelling Wireless Bluetooth Headphones. These headphones are designed to provide a superior audio experience with advanced noise-cancelling technology, comfortable over-ear design, and versatile connectivity options. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Hvad er der i æsken

Image: Bluedio T5 headphones, user manual, USB-C charging cable, 3.5mm to Type-C audio cable, and a flocking bag, all neatly arranged in their product packaging.

• Bluedio T5 Active Noise Cancelling Headphones
• 3.5mm to Type-C Audio Cable
• USB Type-C opladerkabel
• Flocking Bag
• Brugervejledning (dette dokument)

Produkt overview

Familiarize yourself with the various components and controls of your Bluedio T5 headphones.

Image: Detailed diagram illustrating the location and function of controls on the Bluedio T5 headphones. Key labels include Volume+/Next Track, Volume-/Previous Track, ANC Indicator, ANC Switch, Charging Connector/Audio Jack, MF Button (Multi-Function), LED Indicator, and Microphone.

• Lydstyrke + / Næste nummer: Kort tryk for at skrue op for lydstyrken, langt tryk for næste nummer.
• Lydstyrke - / Forrige nummer: Kort tryk for at sænke lydstyrken, langt tryk for at sænke forrige nummer.
• MF Button (Multi-Function): Tænd/sluk, afspil/pause musik, besvar/afslut opkald.
• ANC-switch: Toggles Active Noise Cancelling function on or off.
• ANC Indicator: Lights up when Active Noise Cancelling is active.
• LED-indikator: Viser strømstatus, parringstilstand og opladningsstatus.
• Charging Connector / Audio Jack: Universal Type-C port for charging and wired audio connection.
• Mikrofon: For hands-free calls (functions in wireless mode only).

Opsætning

1. Opladning af hovedtelefonerne

Before first use, fully charge your Bluedio T5 headphones. Use the provided USB Type-C charging cable.

• Tilslut Type-C-enden af ​​opladningskablet til hovedtelefonernes opladningsport.
• Tilslut USB-A-enden til en kompatibel USB-strømadapter (medfølger ikke) eller en computers USB-port.
• The LED indicator will show charging status. Once fully charged, the indicator will change (refer to LED indicator section for details).
• A full charge provides approximately 25 hours of playtime with Bluetooth and ANC active.

Billede: Et nærbillede view of the Type-C charging port located on the earcup of the Bluedio T5 headphones, highlighting its modern and reversible design.

2. Parring via Bluetooth

The Bluedio T5 headphones use Bluetooth 4.2 for a stable wireless connection.

• Sørg for, at hovedtelefonerne er slukket.
• Press and hold the MF Button until the LED indicator flashes blue and red alternately, indicating pairing mode.
• Aktiver Bluetooth på din enhed (smartphone, tablet, pc), og søg efter tilgængelige enheder.
• Select "Bluedio T5" from the list of devices.
• Når parringen er afsluttet, blinker LED-indikatoren langsomt blåt.
• Hvis en adgangskode er påkrævet, skal du indtaste "0000".

Betjeningsvejledning

Tænd/sluk

• Tænd: Press and hold the MF Button until you hear "Power On" and the blue LED flashes.
• Sluk: Press and hold the MF Button until you hear "Power Off" and the red LED flashes briefly before turning off.

Aktiv støjreduktion (ANC)

The Bluedio T5 features 4-microphone Active Noise Cancelling technology to reduce ambient noise.

Image: A visual representation of the Bluedio T5 headphones, emphasizing their active noise cancelling capability with a graphic indicating noise reduction. The image also highlights the comfortable over-ear design.

• Slå ANC til: Slide the ANC Switch to the "ON" position. The ANC indicator will light up.
• Slå ANC fra: Slide the ANC Switch to the "OFF" position. The ANC indicator will turn off.
• ANC is most effective at reducing continuous low-frequency noise, such as engine hum or air conditioning.

Musikafspilning

• Afspil/pause: Short press the MF Button.
• Næste nummer: Tryk længe på Lydstyrke + -knappen.
• Forrige nummer: Tryk længe på lydstyrkeknappen.
• Lydstyrke op: Tryk kort på Lydstyrke + knappen.
• Skrue ned for lyden: Tryk kort på lydstyrkeknappen.

Håndfri opkald

The built-in microphone allows for clear hands-free communication. Note: The microphone only works in wireless (Bluetooth) mode.

• Besvar/afslut opkald: Short press the MF Button.
• Afvis opkald: Long press the MF Button.
• Genopkald sidste nummer: Double-press the MF Button.

Kablet tilstand

You can use the Bluedio T5 as a wired headphone even if the battery is depleted.

• Connect the 3.5mm end of the audio cable to your audio source.
• Connect the Type-C end of the audio cable to the headphone's charging/audio port.
• In wired mode, Bluetooth and ANC functions are typically disabled or operate differently depending on battery level.

Image: A close-up of the Bluedio T5 headphone's earcup, illustrating the Type-C port which serves as both a charging port and an audio jack for wired listening.

Opretholdelse

Korrekt pleje sikrer dine hovedtelefoners levetid og ydeevne.

• Rensning: Brug en blød, tør klud til at rengøre hovedtelefonerne. Undgå skrappe kemikalier eller slibende materialer.
• Øreværn: The earmuffs are detachable for cleaning or replacement. Gently twist counter-clockwise to remove and clockwise to reinstall. If they become loose, a small amount of adhesive can be used to secure them permanently.
• Opbevaring: When not in use, store the headphones in the provided flocking bag to protect them from dust and scratches.
• Batteripleje: For at forlænge batterilevetiden bør du undgå at aflade hovedtelefonerne helt ofte. Oplad dem regelmæssigt, selvom de ikke er i konstant brug.
• Komfort: Take off the headphones every 2-3 hours to allow your ears to relax, ensuring better hearing enjoyment and ear protection.

Billede: Et nærbillede view of the Bluedio T5 headphones, demonstrating the detachable earmuffs. This feature allows for easy cleaning or replacement of the ear pads.

Fejlfinding

If you encounter any issues with your Bluedio T5 headphones, please refer to the following solutions:

• Bluetooth Disconnect or Cannot Connect:
  • Unpair the headphones from your device, remove the pairing memory, then re-enter pairing mode and pair again.
  • Ensure the headset is within 10 meters (33 feet) of your device.
  • Reset the headphones: Power on the headphones, charge them for about 10 seconds until they power off automatically (LED goes out), then unplug the cable. Power on the headphones again and re-pair.
• No Sound on One Side:
  • Reset the headphones as described above.
  • Remove the pairing memory from your device and re-pair.
• Earmuffs Fall Off:
  • The earmuffs are designed to be detachable. You can easily remove and reinstall them by twisting.
  • If they frequently fall off, a small amount of adhesive can be used to secure them permanently.
• Sound Quality Issues with ANC:
  • Activating ANC may slightly alter the sound profile, particularly affecting mid-bass levels. This is normal for some ANC systems.
  • For optimal sound quality without noise cancellation, ensure the ANC switch is in the "OFF" position.

Specifikationer

Garanti og support

For warranty information and customer support, please refer to the official Bluedio webwebstedet eller kontakt din forhandler. Gem din købskvittering til garantikrav.

For yderligere hjælp, besøg venligst Bluedio Store on Amazon.