InnoGear AD308

InnoGear AD308 Real Bamboo Essential Oil Diffuser

Model: AD308 | Brand: InnoGear

Vigtige sikkerhedsforanstaltninger

To reduce the risk of electric shock, fire, or injury, please read all instructions carefully before using this appliance.

  • Placer altid diffuseren på en flad, stabil overflade.
  • Do not exceed the MAX water line when filling the water tank.
  • Ensure the lid is properly secured before operating.
  • Do not allow water to flow into the air outlet when pouring.
  • Unplug the diffuser from the power outlet when not in use or before cleaning.
  • Opbevares utilgængeligt for børn og kæledyr.
  • This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Brug kun den medfølgende strømadapter.
  • Nedsænk ikke diffusoren i vand eller andre væsker.
  • Clean the diffuser regularly after every 3 uses to prevent mineral buildup and ensure optimal performance.

Produktdiagram

Diagram showing the upgraded air outlet design and drain side of the InnoGear AD308 diffuser.

Upgraded Air Outlet Design: This diagram highlights the specially designed air outlet and the drain side. When pouring water, avoid the air outlet to prevent damage.

Diagram showing the dimensions of the InnoGear AD308 diffuser: 3.9 inches diameter, 7.9 inches height, and 160ml capacity.

Produktdimensioner: The diffuser measures approximately 3.9 inches in diameter and 7.9 inches in height, with a 160ml water capacity.

Specifikationer

ModelnummerAD308
MaterialeBPA-free Bamboo
Vandkapacitet160 ml
Timerindstillinger1 Hr / 2 Hrs
DugtilstandeIntermittent (mist and pause per 10s) / Continuous
Magt10 W
Voltage110-240 V
Automatisk afbrydelseJa (når vandstanden er lav)
LED lys7-Color (adjustable)
Dimensioner3.94 x 7.87 x 3.94 tommer
Vægt1.15 pund

Pakkens indhold

  • 1 x InnoGear AD308 Essential Oil Diffuser
  • 1 x målekop
  • 1 x strømadapter
  • 1 x brugermanual

Opsætning

  1. Placer diffusoren: Placer diffuseren på en flad, stabil og vandafvisende overflade.
  2. Fjern låget: Gently remove the bamboo outer cover and the inner lid.
  3. Tilsæt vand: Using the provided measuring cup, fill the water tank with clean tap water up to the MAX line (160ml). Do not overfill.
  4. Tilføj æterisk olie: Add 3-5 drops of your preferred essential oil directly into the water tank. Adjust the amount based on personal preference.
  5. Replace Lids: Securely place the inner lid back, followed by the bamboo outer cover. Ensure both are properly aligned.
  6. Tilslut strøm: Plug the power adapter into the diffuser's power input port, then plug the adapter into a standard electrical outlet.

Video: InnoGear Upgraded Real Bamboo Diffuser Setup. This video demonstrates the process of setting up and operating the InnoGear AD308 diffuser, including adding water and essential oils, and activating mist and light functions.

Betjeningsvejledning

Tågekontrol

  • Tryk på Mist knappen (left button) once to turn on continuous mist mode.
  • Tryk på Mist knappen a second time for intermittent mist mode (mists for 10 seconds, pauses for 10 seconds).
  • Tryk på Mist knappen a third time to set the timer for 1 hour.
  • Tryk på Mist knappen a fourth time to set the timer for 2 hours.
  • Tryk på Mist knappen a fifth time to turn off the mist function.
  • The diffuser will automatically shut off when the water level is low, regardless of the timer setting.

Lysstyring

  • Tryk på Lys knap (right button) once to turn on the 7-color changing LED light.
  • Tryk på Lys knap again to fix the light to a specific color. Each press will cycle through the available colors.
  • Tryk og hold på Lys knap i 2 sekunder for at slukke lyset.

Opretholdelse

Regular cleaning is essential to ensure the longevity and optimal performance of your diffuser. Clean the diffuser after every 3 uses or when changing essential oils.

Rengøringsprocedure

  1. Tag stikket ud: Frakobl diffusoren fra stikkontakten.
  2. Tømt vand: Remove the lids and carefully pour out any remaining water from the drain side of the tank. Avoid pouring water into the air outlet.
  3. Tør tanken af: Brug en blød klud eller vatpind med en lille mængde mildt opvaskemiddel til forsigtigt at tørre indersiden af ​​vandtanken og ultralydspladen af.
  4. Skylle: Rinse the tank with clean water, again being careful to avoid the air outlet.
  5. Tørre: Wipe all parts dry with a clean, soft cloth. Ensure all components are completely dry before reassembling or storing.
  6. Rengøring af låg: Wipe the bamboo lid with a damp klud og tør grundigt.

Note: Do not use harsh detergents, solvents, or abrasive cleaners, as these may damage the diffuser.

Fejlfinding

ProblemMulig årsagLøsning
Ingen tåge eller lav tågeproduktion
  • Utilstrækkeligt vand i tanken.
  • Vandstanden overstiger MAX-linjen.
  • Water or essential oil residue on the ultrasonic plate.
  • Luftudløb blokeret.
  • Tilsæt vand til det passende niveau.
  • Tøm noget vand ud, hvis det er overfyldt.
  • Rengør ultralydspladen i henhold til vedligeholdelsesanvisningerne.
  • Ensure the air outlet is clear and not obstructed.
Diffusor tænder ikke
  • Ingen strømtilslutning.
  • Vandstanden er for lav (automatisk slukning aktiveret).
  • Strømadapteren er ikke korrekt tilsluttet.
  • Kontroller, om strømadapteren er korrekt tilsluttet både diffusoren og stikkontakten.
  • Fyld vandtanken op til det passende niveau.
  • Ensure the correct power adapter is used.
No scent or weak scent
  • Insufficient essential oil.
  • Poor quality essential oil.
  • Diffuser needs cleaning.
  • Tilføj flere dråber æterisk olie.
  • Use high-quality, pure essential oils.
  • Clean the diffuser thoroughly.

Garanti og support

For warranty information or technical support, please contact InnoGear customer service. Refer to the contact details provided with your purchase or visit the official InnoGear webwebsted.

Webwebsted: InnoGear Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.