ARREGUI Premier 16501-S2 Elektronisk Kombinationspengeskab Brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your ARREGUI Premier 16501-S2 Electronic Combination Safe. Please read this manual thoroughly before using the safe to ensure proper function and security.

Image 1.1: The ARREGUI Premier 16501-S2 Electronic Combination Safe, featuring a dark gray finish and an electronic keypad with a rotary knob.

2. Sikkerhedsoplysninger

• Opbevar ikke nødnøgler i pengeskabet. Opbevar dem et sikkert og separat sted.
• Ensure the safe is installed on a stable surface or securely anchored to prevent tipping or unauthorized removal.
• Hold pengeskabet væk fra overdreven fugtighed eller ekstreme temperaturer.
• Do not attempt to force the safe open if the code is forgotten or batteries are depleted. Use the emergency key.
• This safe is not water-resistant. Protect it from water exposure.

3. Opsætning

3.1 Udpakning

Carefully remove the safe from its packaging. Inspect the safe for any signs of damage. The package should include:

• ARREGUI Premier 16501-S2 Safe
• Instruktionsmanual
• 2 nødnøgler
• Mounting Material (screws)

3.2 Batteriinstallation

The safe requires 4 AA 1.5V alkaline batteries (not included) for the electronic lock to function. The battery compartment is typically located on the inside of the safe door.

1. Open the safe using one of the emergency keys (refer to section 3.3 for initial opening).
2. Find batteridækslet på indersiden af ​​døren.
3. Fjern dækslet, og isæt 4 nye AA alkaline-batterier, og sørg for at polerne vender korrekt (+/-).
4. Sæt batterirummets dæksel på igen.

3.3 Initial Opening with Emergency Key

Før du indstiller din personlige kode, skal du åbne pengeskabet med nødnøglen.

1. Locate the emergency keyhole, usually concealed behind a small cover or the rotary knob on the keypad.
2. Sæt en af ​​de medfølgende nødnøgler i nøglehullet.
3. Turn the key clockwise (or counter-clockwise, depending on the lock) while simultaneously turning the rotary knob to open the safe door.
4. Once open, remove the key and store it in a safe place outside the safe.

Billede 3.1: Nærbillede view of the electronic keypad and the emergency keyhole, with an emergency key inserted, demonstrating how to manually open the safe.

3.4 Montering af pengeskabet

While installation is not strictly required, anchoring the safe is highly recommended to prevent theft. The ARREGUI Premier 16501-S2 model features 4 pre-drilled holes on the base and 4 on the rear wall, each 9 mm in diameter, for secure mounting.

1. Choose a suitable location for the safe, such as inside a cabinet, on a shelf, or directly to a wall or floor.
2. Mark the drilling points through the pre-drilled holes on the safe's base or rear.
3. Drill pilot holes into the chosen surface using an appropriate drill bit.
4. Position the safe and secure it using the provided mounting material (screws). Ensure all screws are tightened firmly.

Image 3.2: The ARREGUI safe securely installed within a wooden cabinet, demonstrating a common mounting scenario.

4. Betjeningsvejledning

4.1 Setting Your Personal Code

With the safe door open, you can set your personal 3 to 8 digit opening code.

1. Locate the red or green reset button on the inside of the safe door, near the hinge.
2. Press the reset button. You should hear a beep, and an indicator light on the keypad will illuminate.
3. Indtast din ønskede 3- til 8-cifrede kode på tastaturet inden for 5 sekunder.
4. Press the '#' or 'B' button (or similar confirmation button, check keypad markings) to confirm. You should hear a confirmation beep.
5. Test den nye kode med døren åben, før du lukker den.

4.2 Åbning af pengeskabet med din kode

1. Indtast din personlige kode på 3 til 8 cifre på tastaturet.
2. Press the '#' or 'B' button (or similar confirmation button).
3. If the code is correct, you will hear a beep, and the green indicator light will illuminate.
4. Within 5 seconds, turn the rotary knob clockwise (or counter-clockwise) to open the safe door.

4.3 Temporary Lock-Out

If an incorrect code is entered 3 consecutive times, the safe's electronic lock will temporarily disable for a short period (e.g., 20-30 seconds) as a security measure. During this time, the keypad will not respond. Wait for the lock-out period to expire before attempting to enter the code again.

4.4 LED-indikatorer

• Grøn LED: Indicates correct code entry and that the safe can be opened.
• Rød LED: Indicates incorrect code entry or low battery power. If the red LED flashes continuously during operation, it signifies that the batteries need to be replaced soon.

5. Vedligeholdelse

5.1 Udskiftning af batteri

When the red LED light indicates low battery power, replace all 4 AA alkaline batteries promptly to ensure continuous operation. Refer to section 3.2 for battery installation instructions. Always use new, high-quality alkaline batteries.

5.2 Rengøring

Rengør ydersiden af ​​pengeskabet med en blød, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de elektroniske komponenter.

6. Fejlfinding

7. Specifikationer

The following table details the technical specifications for the ARREGUI Premier 16501-S2 Electronic Combination Safe:

Image 7.1: Dimensional diagram of the ARREGUI Premier 16501-S2 safe, illustrating external measurements (25x35x25 cm) and internal storage space (24.5x34.5x19.5 cm).

Image 7.2: Feature diagram of the ARREGUI Premier 16501-S2 safe, indicating body thickness (1.5 mm), door thickness (3 mm), emergency key access, and two 20 mm diameter locking bolts.

8. Garanti og support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact ARREGUI customer service through their official webwebstedet. Behold din købskvittering som købsbevis.