WOBANE Under Cabinet LED Strip Light Kit

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your WOBANE Under Cabinet LED Strip Light Kit. This kit is designed to provide efficient and warm white illumination (2700K) for various indoor applications such as cabinets, cupboards, desks, shelves, and more. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Pakkens indhold

Bekræft at alle komponenter er til stede i din pakke:

• 4 x LED Light Bars (20 inches each)
• 1 x Power Adapter (ETL Listed, 12V DC)
• 1 x In-line On/Off Switch
• Connectors (various types for straight and angled connections)
• Kabelholdere

3. Produktspecifikationer

4. Vigtige sikkerhedsinstruktioner

• Læs alle instruktioner, før du bruger produktet.
• Dette produkt er designet til kun indendørs brugMå ikke udsættes for vand eller høj luftfugtighed.
• Sørg for, at strømforsyningen er afbrudt før installation eller vedligeholdelse.
• Use only the provided power adapter. Using an incompatible adapter may damage the product or pose a fire hazard.
• Do not cut the LED strips unless specifically instructed and at designated cut marks. Improper cutting can damage the strip and void the warranty.
• Avoid bending the LED strips sharply, especially at connection points, to prevent damage to the circuit.
• Opbevares utilgængeligt for børn.
• Hvis nogen del af produktet er beskadiget, skal brugen straks ophøre og kundesupport kontaktes.

5. Installationsvejledning

Følg disse trin for en enkel og sikker installation:

5.1. Forberedelse af overfladen

Before attaching the LED strips, ensure the installation surface is clean, dry, and smooth. Wipe the area with a clean cloth to remove dust, grease, or moisture. This will ensure optimal adhesion of the tape.

Figure 5.1: Clean the installation surface thoroughly before applying the LED strips.

5.2. Montering af LED-strimler

1. Carefully peel off the protective backing from the adhesive tape on the back of each LED light bar.
2. Press the LED strip firmly onto the desired surface. Apply even pressure along the entire length to ensure good contact.

5.3. Tilslutning af komponenter

Connect the LED light bars to each other and to the power adapter using the provided connectors and the in-line switch. Ensure all connections are secure.

Figure 5.2: Use the provided connectors to link multiple LED light bars.

Use the included cable holders to manage and secure any loose wiring, keeping the installation neat and tidy. Connect the in-line switch and power adapter to the assembled LED strips, then plug the adapter into a standard electrical outlet.

Figure 5.3: Secure cables with cable holders for a clean installation.

5.4. Customizing Layout with Connectors

The kit includes flexible connectors that allow for versatile installation around corners or across gaps between surfaces. These connectors ensure a continuous lighting effect even in complex layouts.

Figure 5.4: Flexible connectors enable seamless corner installations.

Figure 5.5: Achieve various angles with the flexible connectors.

6. Betjening

Once installed and connected to power, operate the WOBANE LED Strip Light Kit using the in-line switch. Simply toggle the switch to turn the lights ON or SLUKKET.

7. Vedligeholdelse

To maintain the performance and appearance of your LED strip lights:

• Sørg for, at strømmen er afbrudt før rengøring.
• Wipe the LED strips and other components with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Undgå direkte kontakt med vand.

8. Fejlfinding

9. Garanti og support

For warranty information or technical support, please refer to the product packaging or contact WOBANE customer service directly. Keep your purchase receipt as proof of purchase.