Cloudray MYJG-100W 220V CO2 Laser Power Supply User Manual

1. Produktet er slutview

The Cloudray MYJG-100W 220V CO2 Laser Power Supply is designed for 80-100W CO2 laser tubes, offering stable and efficient power delivery for laser engraving and cutting applications. It features quick response speed, high performance, and various safety measures to ensure reliable operation.

This power supply is compatible with a wide range of laser tubes from different manufacturers and includes an external ammeter with an LCD screen for real-time monitoring of current and status.

Cloudray 100W Laser Power Supply with key features listed

Figure 1: Cloudray 100W Laser Power Supply highlighting simple control, laser power adjustment, laser light test function, factory aging test, and high efficiency.

2. Specifikationer

Below are the detailed specifications for the Cloudray MYJG-100W 220V CO2 Laser Power Supply:

Feature	Specifikation
Input bindtage	AC230V
AC frekvens	47 ~ 440Hz
Maks. Output voltage	28 KV
Maks. Udgangsstrøm	30mA
Størrelse (L x B x H)	230 x 161 x 91 mm (12.6 x 7.87 x 5.91 tommer)
Vægt	2.8 kg (7.05 pund)
Effektivitet	91 %
MTBF (Mean Time Between Failures)	≥ 30000 timer
Responshastighed	≤ 1 ms
Voltage Range (High-Level)	≥ 3V
Voltage Range (Low-Level)	≤ 0.7V
Omgivelsestemperatur	-30° ~ +65°C
Afkølingsmetode	Forced air cooling (fan cooling)
Høj temperatur test	Full Load / 60°C / 12 hours
Start / Stop Test	500 gange 7 sekunder

Detailed specifications table for Cloudray 100W CO2 Power Supply

Figure 2: Visual representation of the power supply's dimensions and key electrical specifications.

3. Opsætning og installation

Proper installation is crucial for the safe and efficient operation of your laser system. Always ensure the power supply is disconnected from the main power source before beginning any installation or maintenance.

3.1 Ledningsforbindelser

The power supply features clearly labeled terminals for input power, laser control signals, and high voltage output. Refer to the wiring diagram for correct connections.

AC-indgang: Connect the main AC power supply (220V) to the designated AC terminals.
Høj voltage Output: Tilslut høj voltage output to your CO2 laser tube. Ensure secure connections and proper insulation.
Kontrolsignaler: Connect TTL level signals for start/stop functionality. The power supply supports both active-high and active-low devices.
Vandbeskyttelse: Connect the water protection signal to ensure the laser tube is adequately cooled during operation.
External Ammeter: Connect the external ammeter to monitor the processing current.

Wiring diagram for Cloudray CO2 Laser Power Supply showing input, output, and control connections.

Figure 3: Detailed wiring diagram for the power supply, illustrating connections for AC input, high voltage output, and control signals.

3.2 Laser Tube Connection (Exampdet)

When connecting the laser tube, ensure the water inlet and outlet are correctly attached to your cooling system. The high voltage cable from the power supply connects to the anode of the laser tube, and the cathode connects to the ground.

Video 1: Demonstration of connecting a CO2 laser tube to a power supply, including water cooling lines and electrical connections.

4. Betjeningsvejledning

The Cloudray MYJG-100W power supply offers intuitive control and monitoring features.

4.1 Tænd/sluk

Ensure all connections are secure before powering on the unit. Use the main power switch to turn the power supply on or off.

4.2 Kontrolfunktioner

TTL Level Control: The power supply uses TTL-level signals for precise control over laser operations, including start and stop functions.
Test knap: A convenient button is included to manually check the laser output. This is useful for troubleshooting and alignment.
Justerbar LCD-skærm: The external LCD display shows the current output amperage and the status of the water protection system and laser signal. A trimmer potentiometer allows for precise current adjustments.

Close-up of the adjustable LCD display and control connections on the Cloudray power supply.

Figure 4: The adjustable LCD display and control interface for monitoring and adjusting laser output.

Close-up of the variable voltage level terminals on the Cloudray power supply.

Figure 5: Detail of the TTL-level signal connections for controlling active-high and active-low devices.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer strømforsyningens levetid og optimale ydeevne.

Rensning: Periodically clean the cooling fans and ventilation grilles to prevent dust accumulation, which can lead to overheating.
Tilslutningstjek: Regularly inspect all electrical connections for tightness and signs of wear or corrosion.
Vandkølesystem: Ensure your laser tube's water cooling system is functioning correctly and that water flows freely without blockages.

Image showing the cooling fan at the back of the power supply.

Figur 6: Bagside view of the power supply, showing the cooling fan. Keep this area clear for proper airflow.

6. Fejlfinding

This section provides solutions for common issues you might encounter with your power supply.

6.1 Power Supply Fails to Start/No Output

Mulige årsager: Blown fuse (short circuit or overload), abnormal input voltage (incorrect 220V connection), control circuit failure (no signal from mainboard).
Løsninger:
1. Check the fuse. Replace if blown and investigate short circuit causes.
2. Mål input voltage. Ensure it matches power supply specifications (e.g., 220V ±10%).
3. Test manual mode. Press the 'TEST' button. If the laser fires, the issue is in the control system (check signal wires or mainboard).

Troubleshooting guide for power supply failure to start or no output.

Figure 7: Troubleshooting steps for power supply startup issues.

6.2 Control Signal Unresponsive (Cannot Adjust via Mainboard)

Mulige årsager: Loose control cable connection (e.g., 6-pin green terminal), faulty water protection switch (WP) or control chip.
Løsninger:
1. Reconnect control cables. Check for oxidation or loose contacts.
2. Bypass WP test. Temporarily connect WP to GND. If laser fires, the issue is with the water protection switch.
3. Replace water protection switch if faulty.

Image showing the LCD display with current output and water protection status.

Figure 8: LCD display showing current output and water protection status, useful for diagnosing control issues.

6.3 Unstable Laser Output/Power Drop

Mulige årsager: Faulty current regulation circuit, laser tube aging or power mismatch, poor heat dissipation (fan failure or dust accumulation).
Løsninger:
1. Inspect current control module. Verify adjustment functionality.
2. Match laser tube power rating. Ensure power supply output matches tube specifications.
3. Clean cooling fans. Ensure proper operation.

Troubleshooting guide for unstable laser output or power drop.

Figure 9: Troubleshooting steps for unstable laser output.

6.4 Frequent Fuse/Power Transistor Burnout

Mulige årsager: Shorted power transistors (MOSFET/IGBT failure), abnormal load (laser tube internal short), design flaw (insufficient heat dissipation).
Løsninger:
1. Replace power transistors. Check driver circuit functionality.
2. Test laser tube impedance. Rule out load short circuit.
3. Enhance cooling. Add auxiliary fans or improve airflow.

Troubleshooting guide for frequent fuse or power transistor burnout.

Figure 10: Troubleshooting steps for fuse and power transistor issues.

7. Garanti og support

For warranty information, please refer to the product packaging or contact Cloudray customer service directly. Cloudray offers technical support and assistance for their products.

For further assistance or to explore other Cloudray products, please visit the official Cloudray Store.

Cloudray MYJG-100W MONITOR 220V