Indledning
Tak for købetasing the ORICO 6629US3 USB3.0 Dual Bay HDD/SSD Docking Station. This device is designed to provide convenient data transfer and offline cloning capabilities for 2.5-inch and 3.5-inch SATA hard drives and solid-state drives. Please read this manual carefully to ensure proper installation and operation.
Produktegenskaber
- Højhastighedsoverførsel: Features a high-speed USB 3.0 port, achieving a maximum transfer speed of 5Gbps. UASP support further enhances transfer speeds. Backward compatible with USB 2.0 / 1.0.
- Klon funktion: Supports two 2.5-inch or 3.5-inch SATA hard drives, with a total capacity of up to 20TB (10TB per slot). Includes an offline HDD/SSD cloning function, allowing direct drive duplication without a computer.
- Nem at bruge: Driver-free and supports hot-swap. Progress indicator lights clearly show the device's operational status during cloning.
- Bred kompatibilitet: Vertical insertion design, tool-free installation, and excellent heat dissipation. Supports Mac, Windows, and Linux operating systems.
Pakkens indhold
- 1x ORICO USB3.0 HDD Docking Station
- 1x 12V3A Power Adapter (PSE certified)
- 1x USB3.0 Cable (100cm)
- 1x brugermanual
- 1x servicekort
Specifikationer
| Produktnavn | ORICO HDD Docking Station with Clone Function |
| Modelnummer | 6629US3 |
| Understøttede drev | 2.5/3.5-inch SATA HDD/SSD |
| Max kapacitet | Up to 10TB per slot, 20TB total |
| Funktioner | Offline clone, Data transfer |
| input interface | USB 3.0 Type-B |
| Materiale | ABS plast |
| Farve | Sort |
| Strømadapter | 12V3A (PSE certified) |
| Kabellængde | USB 3.0 A-B (100cm) |
| Varens vægt | 260 gram |
| Kompatibel OS | Mac, Windows, Linux |
Opsætning
- Pak enheden ud: Fjern forsigtigt alle komponenter fra emballagen.
- Tilslut strøm: Connect the provided 12V3A power adapter to the docking station's power input port and then to a power outlet.
- Indsæt drev:
Image: The ORICO 6629US3 docking station with a 3.5-inch HDD and a 2.5-inch SSD inserted into its two vertical slots.
Insert your 2.5-inch or 3.5-inch SATA HDD/SSD vertically into the designated slots (HDD1 and HDD2). Ensure the drives are firmly seated. The device supports tool-free installation. - Connect to PC (for data transfer):
Image: The ORICO 6629US3 docking station connected to a laptop via a USB 3.0 cable, demonstrating its use for data access.
If you intend to use the docking station for data transfer to/from a computer, connect the USB 3.0 cable from the docking station to an available USB 3.0 port on your computer. - Tænd: Press the power button on the docking station. The power LED should illuminate blue.
Betjeningsvejledning
A. Data Transfer Mode (PC Connection)
- Ensure the 'PC/CLONE' switch on the back of the device is set to 'PC'.
- Connect the docking station to your computer using the USB 3.0 cable.
- Insert your 2.5-inch or 3.5-inch SATA HDD/SSD into the slots.
- Power on the docking station. Your computer should detect the drives automatically (driver-free).
- You can now access the drives as external storage devices on your computer.
B. Offline Clone Function
The offline clone function allows you to duplicate a hard drive without connecting to a computer. This is useful for creating backups or upgrading drives.
Vigtige bemærkninger til kloning:
- Kildedisk: The original HDD/SSD to be copied. Insert into the 'Source' slot.
- Måldisk: The destination HDD/SSD for the copy. Insert into the 'Target' slot.
- The target disk's capacity must be lig med eller større end the source disk's capacity. Cloning will not start otherwise.
- Cloning will overwrite all data on the target disk. Please back up any important data from the target disk before proceeding.
- Incorrect insertion of Source and Target disks can lead to data loss on your original drive. Always confirm disk positions before starting.
- The time required for cloning depends on the total capacity of the source hard disk, not the size of the data stored on it.
- Afbryd forbindelsen til pc'en: Ensure the docking station is disconnected from your computer.
- Indsæt drev: Insert the source disk into the 'Source' slot (HDD1) and the target disk into the 'Target' slot (HDD2). Ensure they are firmly seated.
Image: The ORICO 6629US3 docking station showing the 'Source' and 'Target' slots for offline cloning, with drives inserted.
- Tilslut strøm: Connect the power adapter and press the power button. The device will beep twice and begin a self-test.
- Indstil klontilstand: Push the 'PC/CLONE' switch on the back of the product to the 'CLONE' position.
- Start kloning: Press the 'Start' button on the product. Cloning will begin.
- Overvåg fremskridt: The LED indicators (25%, 50%, 75%, 100%) will show the cloning progress. All LEDs will illuminate when cloning is complete.
Image: A close-up of the ORICO 6629US3 docking station highlighting the LED progress indicators (25%, 50%, 75%, 100%) during an offline cloning operation.
- Færdiggørelse: Once all LEDs are lit, the cloning process is finished. You can now safely remove the drives.
Opretholdelse
- Rensning: Brug en blød, tør klud til at rengøre dockingstationens yderside. Brug ikke flydende rengøringsmidler eller aerosoler.
- Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Varmeafledning: The vertical design aids in heat dissipation. Ensure the device is placed in a well-ventilated area to prevent overheating, especially during prolonged use or cloning operations.
Image: The ORICO 6629US3 docking station illustrating its vertical design and airflow for efficient heat dissipation.
- Strømforsyning: Always use the original 12V3A power adapter provided with the device to ensure stable operation.
Image: The ORICO 6629US3 docking station with its 12V power adapter connected, emphasizing stable power delivery.
Fejlfinding
- Drive Not Detected by PC:
- Ensure the USB cable is securely connected to both the docking station and the computer.
- Verify the 'PC/CLONE' switch is set to 'PC' mode.
- Check if the drive is properly seated in the slot. If only one HDD LED lights up, the unlit HDD has a connection issue. Reinsert the drive.
- Prøv at tilslutte til en anden USB-port på din computer.
- For new drives, they may need to be initialized and formatted in Disk Management (Windows) or Disk Utility (Mac) before they appear.
- Offline Clone Fails to Start:
- Sørg for, at dockingstationen er frakoblet enhver computer.
- Verify the 'PC/CLONE' switch is set to 'CLONE' mode.
- Confirm that the target disk's capacity is equal to or greater than the source disk's capacity.
- Check that the source and target drives are inserted into the correct slots ('Source' and 'Target').
- Sørg for, at begge drev er korrekt isat.
- Langsomme overførselshastigheder:
- Ensure you are using a USB 3.0 port on your computer and the provided USB 3.0 cable.
- Verify that your operating system supports UASP for optimal performance.
- Overophedning af enheden:
- Sørg for tilstrækkelig ventilation omkring dockingstationen.
- Avoid placing the device in enclosed spaces.
Garanti og support
ORICO provides an 18 måneders garanti for this product from the date of purchase. Additionally, ORICO offers livslang teknisk support for sine produkter.
If you encounter any issues or have questions regarding the product, please contact ORICO customer support through your retailer or the official ORICO website. Please have your purchase receipt and product model number (6629US3) ready when contacting support.