Indledning
This manual provides detailed instructions for the proper use and maintenance of your Casio Illuminator AQ-E10 digital-analog watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. The AQ-E10 features both analog and digital time displays, an alarm, a stopwatch, and an illuminator backlight.
Front view of the Casio Illuminator AQ-E10 watch, showcasing its digital and analog display, black rubber strap, and round black dial.
Opsætning
Indledende inspektion
Upon unboxing, inspect the watch for any visible damage. Ensure all buttons operate smoothly. If any issues are found, contact your retailer.
Indstilling af digital tid og dato
- I tidsvisningstilstand skal du trykke på og holde TILPASSE button (usually top-left) until the seconds digits start to flash, indicating the setting screen.
- Tryk på MODE button (usually bottom-left) to cycle through the settings: Seconds → Hour → Minutes → Year → Month → Day → 12/24-hour format.
- Brug SØGE button (usually top-right) or FORWARD button (usually bottom-right) to increase the flashing value. Hold the button to change values rapidly.
- Når alle indstillinger er justeret, skal du trykke på TILPASSE button again to exit the setting screen.
Synchronizing Analog Hands
The analog hands are typically synchronized automatically with the digital time. If they are out of sync, refer to the detailed instructions in the operating section for manual adjustment, or consult the full Casio module manual for your specific watch module number (often found on the watch's case back).
Betjening af uret
Tilstandsnavigation
Tryk på MODE button to cycle through the watch's functions: Timekeeping Mode → Alarm Mode → Stopwatch Mode.
Tidtagningstilstand
This mode displays the current time (hours, minutes, seconds) and date (month, day, day of the week) digitally, alongside the analog hands.
Alarmtilstand
- Fra tidsvisningstilstand, tryk på MODE until you reach the Alarm Mode. The alarm time will be displayed.
- Tryk og hold på TILPASSE knappen, indtil alarmens timecifre blinker.
- Brug SØGE or FORWARD knappen for at indstille den ønskede alarmtime.
- Trykke MODE to move to the minutes setting, then use SØGE or FORWARD for at indstille minutterne.
- Trykke TILPASSE for at bekræfte og afslutte.
- For at tænde/slukke alarmen skal du trykke på SØGE knappen i alarmtilstand (uden at holde den nede TILPASSE). An indicator will show if the alarm is active.
Stopurstilstand
- Fra tidsvisningstilstand, tryk på MODE until you reach the Stopwatch Mode. The display will show "00'00"00".
- Tryk på SØGE knappen for at starte stopuret.
- Trykke SØGE igen for at stoppe stopuret.
- Tryk på TILPASSE knappen for at nulstille stopuret til "00'00"00.
Illuminator (Backlight)
Tryk på LYS button (usually top-right or a dedicated button) to illuminate the digital display for easy viewing in low-light conditions. The illumination duration is typically a few seconds.
Opretholdelse
Vandmodstand
The Casio AQ-E10 is designed to be water resistant. However, it is important to avoid operating the watch buttons while submerged in water to prevent water ingress. Avoid exposing the watch to hot water or steam, as this can compromise the seals.
Rensning
Tør urkassen og remmen af med en blød, tør klud. Ved genstridigt snavs, tør med en let tør klud.amp cloth can be used, followed by a dry cloth. Avoid using chemical cleaners, as they may damage the watch's materials.
Udskiftning af batteri
The watch is powered by a battery. When the display becomes dim or functions become erratic, it may be time for a battery replacement. It is highly recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance integrity.
Opbevaring
Når uret ikke er i brug i længere perioder, skal det opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
Fejlfinding
- Forkert tidsvisning: If the digital or analog time is incorrect, refer to the "Setting the Digital Time and Date" and "Synchronizing Analog Hands" sections under Setup to re-adjust.
- Blank or Dim Digital Display: This usually indicates a low battery. Arrange for battery replacement by a professional.
- Knapper reagerer ikke: Ensure the watch is not in a locked mode (if applicable, though not a common feature for this model). If the issue persists, a battery replacement or professional inspection may be required.
- Kondens inde i uret: If condensation appears inside the watch, it indicates a breach in water resistance. Stop using the watch immediately and have it inspected by a professional to prevent further damage.
Specifikationer
- Modelnummer:
- AQ-E10-1BEF
- Visningsformat:
- Analog-Digital
- Bevægelsestype:
- Kvarts
- Særlige funktioner:
- Alarm, Chronograph (Stopwatch), Illuminator (Backlight)
- Strømkilde:
- Batteri
- Spændetype:
- Spænde
- Remmateriale:
- Gummi
- Etui materiale:
- Gummi
- Krystal type:
- Akryl
- Remfarve:
- Sort
- Skivefarve:
- Sort
- Sags tykkelse:
- 7 millimeter
- Rembredde:
- 16 millimeter
- Dimensioner (pakke):
- 11 x 11 x 7.49 cm; 27.22 g
- Vandtæthed:
- General water resistance (specific depth not provided, avoid button operation underwater).
Garanti og support
Your Casio Illuminator AQ-E10 watch is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Casio website. For technical support, service, or inquiries, please contact Casio customer service or an authorized service center.
Officiel Casio Webwebsted: www.casio.com