Belanger B1812-50 Single Handle Pull-Out Kitchen Faucet User Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Belanger B1812-50 Single Handle Pull-Out Kitchen Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Retain this manual for future reference.

Figure 1: Belanger B1812-50 Single Handle Pull-Out Kitchen Faucet.

This image displays the Belanger B1812-50 kitchen faucet, featuring a polished chrome finish. The faucet includes a single handle for water control and a pull-out spray head, designed for standard kitchen sink installations.

2. Sikkerhedsoplysninger

• Sluk altid for hovedvandforsyningen, inden du påbegynder installation eller vedligeholdelse.
• Brug passende personlige værnemidler, såsom sikkerhedsbriller, under installationen.
• Sørg for, at alle forbindelser er sikre for at forhindre lækager.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret VVS-installatør.
• Brug ikke slibende rengøringsmidler eller stærke kemikalier på vandhanens overflade, da dette kan forårsage skade.

3. Inkluderede komponenter

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Belanger B1812-50 Faucet Assembly (main body with handle and pull-out spray head)
• Monteringshardware
• Supply Lines (typically integrated or included)
• Installationsvejledning (denne vejledning)

4. Opsætning og installation

4.1 Forinstallation

1. Turn off the hot and cold water supply valves under the sink. If no shut-off valves are present, turn off the main water supply to the house.
2. Ryd området under vasken for nem adgang.
3. Fjern din gamle vandhane, hvis det er relevant. Rengør vaskens overflade grundigt.
4. Ensure your sink has the standard 3-hole, 8-inch centerset configuration required for this faucet.

4.2 Faucet Installation Steps

1. Placer vandhanen: Place the faucet assembly onto the sink holes. Ensure the base gasket is properly seated to prevent leaks.
2. Fastgør vandhanen: From underneath the sink, thread the mounting nuts onto the faucet shanks. Hand-tighten, then use a wrench to secure firmly, but do not overtighten.
3. Tilslut vandforsyningsledninger: Connect the hot and cold water supply lines from the faucet to the corresponding shut-off valves. Use thread sealant tape on the threads for a watertight seal. Tighten connections with a wrench.
4. Install Spray Hose Weight: Attach the provided weight to the pull-out spray hose, typically at the lowest point of the loop under the sink, to ensure the spray head retracts properly.
5. Test for lækager: Slowly turn on the hot and cold water supply valves. Check all connections for leaks. Run the faucet for a few minutes to flush out any debris and check for proper operation of the spray head.

Figure 2: Faucet with pull-out spray head.

This image shows the Belanger B1812-50 faucet with its pull-out spray head fully extended, demonstrating the flexibility for various kitchen tasks. The black hose is visible, connecting the spray head to the main faucet body.

5. Betjeningsvejledning

5.1 Vandgennemstrømning og temperaturkontrol

The Belanger B1812-50 faucet features a single lever handle for controlling both water flow and temperature.

• Sådan tænder/slukker du: Løft håndtaget opad for at tænde for vandet. Tryk håndtaget nedad for at slukke for vandet.
• To Adjust Water Flow: Jo længere håndtaget løftes, desto større er vandgennemstrømningen.
• Sådan justeres temperaturen: Move the handle to the left for hot water and to the right for cold water. The center position provides mixed water.

5.2 Pull-Out Spray Head and Diverter

• At forlænge: Gently pull the spray head from the spout. The hose will extend, allowing you to direct water to various areas of the sink.
• For at trække tilbage: Once finished, guide the spray head back into the spout. The hose weight under the sink will assist in retraction.
• Stream/Spray Selection: The spray head includes a push-button diverter. Press the button to switch between a steady stream and a wide spray pattern.

6. Vedligeholdelse

6.1 Rengøring af vandhanen

• Rengør vandhanen regelmæssigt med en blød klud og mild sæbe og vand.
• Skyl grundigt med rent vand og tør med en blød klud for at undgå vandpletter.
• Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the polished chrome finish.

6.2 Rengøring af perlator

If water flow decreases or becomes irregular, the aerator may be clogged with debris.

1. Skru perlatoren af ​​spidsen af ​​sprøjtehovedet.
2. Rinse the aerator screen under running water to remove any particles.
3. Reassemble the aerator and screw it back onto the spray head.

7. Fejlfinding

Hvis du støder på problemer, der ikke er nævnt her, eller hvis de foreslåede løsninger ikke løser problemet, bedes du kontakte kundesupport.

8. Specifikationer

Figure 3: Key features of the Belanger B1812-50 faucet.

This diagram highlights the main features of the Belanger B1812-50 faucet, including its single handle control, compatibility with standard 8-inch sinks, eco-friendly 1.8 GPM flow rate, and pull-out spray head functionality.

• Model: B1812-50
• Mærke: Plumb Pak (Manufactured by Belanger)
• Slutte: Poleret krom
• Materiale: Non-metallic construction (handle material: Brass)
• Monteringstype: Deck Mount, 3-hole installation
• Installationstype: 8-inch Centerset
• Antal håndtag: 1 (Enkelt håndtag)
• Udløbsrækkevidde: 7-inch pull-out spout reach
• Flowhastighed: 1.8 gallon pr. minut (GPM)
• Særlige funktioner: Lead Free, Pull-Out Sprayer, Push-button diverter for stream/spray
• Overholdelse: ADA and cUPC
• Varens vægt: Cirka 2.74 pund
• Produktdimensioner: 5.5 x 12.25 x 13.75 tommer

9. Garanti og support

This Belanger B1812-50 faucet is backed by a Begrænset livstidsgarantiDenne garanti dækker materiale- og fabrikationsfejl under normal brug og service.

For warranty claims, technical assistance, or replacement parts, please contact the manufacturer, Belanger (Plumb Pak), directly. Please have your model number (B1812-50) and proof of purchase available when contacting support.

For mere information kan du besøge Plumb Pak brand page eller den produktliste for yderligere detaljer.