1. Introduktion
This manual provides detailed instructions for the setup, operation, and maintenance of your Flysky FS-GT5 2.4GHz 6-Channel RC Transmitter and FS-BS6 Receiver. This system is designed for remote control car and boat applications, offering precise control and advanced features.
2. Nøglefunktioner
- 4 Climbing Modes: Offers revolutionary control optimization for climbing cars, allowing for easier handling and greater functional distribution.
- 12 Features and Functions, Over 200m Range: Includes MODEL (up to 20 models), NAME, REV, EPA, SUB-TR, D/R, EXP, ABS, CRAW, SVC. Provides a control range exceeding 200 meters (without ground disturbances).
- Built-in Failsafe Function: Allows setting all channels to a predefined value upon signal loss or power removal, protecting the model and ensuring safety.
- Second Gen AFHDS 2A Protocol: Features bidirectional communication, multi-channel hopping frequency, an omni-directional gain antenna, unique ID recognition system, and low power consumption for superior interference protection and reliable receiver sensitivity.
- Ergonomisk design: Features an NTN semi-permeable, segment screen, VA52.5 * 34mm LCD white HD display. Lightweight design enhances handling and durability.
3. Produktet er slutview
Figure 1: Flysky FS-GT5 RC Transmitter and FS-BS6 Receiver.
The Flysky FS-GT5 transmitter and FS-BS6 receiver are designed for remote control car and boat applications, offering 6 channels of control. The system utilizes the advanced AFHDS 2A protocol for reliable communication.
Figure 2: Labeled components of the FS-GT5 Transmitter and FS-BS6 Receiver.
This diagram highlights the key components of the FS-GT5 transmitter, including the steering wheel, throttle trigger, channel switches, LCD display, and antenna. The FS-BS6 receiver's binding port and channel connections are also shown.
Figure 3: AFHDS 2A System Features.
The AFHDS 2A system provides reliable two-way communication, multi-frequency hopping, and an omni-directional gain antenna for enhanced signal stability and interference protection. It also features a unique ID recognition system and low power consumption.
4. Opsætning
4.1 Batteriinstallation
Figur 4: Batterirum til AA-batterier.
The FS-GT5 transmitter supports either four AA batteries or a 2S Lithium Polymer battery pack. To install, open the battery compartment cover located at the base of the handle and insert the batteries according to the polarity markings. Ensure the cover is securely closed after installation.
4.2 Binding af modtageren
Figure 5: Flysky FS-BS6 Receiver.
To bind the FS-BS6 receiver to the FS-GT5 transmitter, ensure both devices are powered off. Connect the bind cable to the receiver's B/VCC port. Power on the receiver, then power on the transmitter while holding the BIND button. The LED indicator on both devices will confirm successful binding. Refer to the quick start guide for detailed steps.
5. Betjeningsvejledning
5.1 Grundlæggende kontroller
The FS-GT5 features a steering wheel for directional control (Channel 1) and a throttle/brake trigger for speed control (Channel 2). Trim buttons (ST.TRIM, TH.TRIM) allow for fine-tuning of steering and throttle neutral positions. Additional channels (3-6) are controlled by various switches and knobs on the transmitter.
5.2 Menunavigation
Figure 6: FS-GT5 Transmitter System Interface.
The LCD display provides access to various settings. Use the navigation dial and buttons (ENTER, BACK/EXIT) to scroll through menu options such as Model selection, Naming, Reverse (REV), End Point Adjustment (EPA), Sub-Trim (SUB-TR), Dual Rate (D/R), Exponential (EXP), Anti-lock Braking System (ABS), Failsafe (F.SAFE), Crawl Mode (CRAWL), and Stability Control (SVC).
6. Avancerede funktioner
6.1 4 Climbing Modes
Figure 7: FS-GT5 with 4 Crawling Modes.
The FS-GT5 offers four distinct climbing modes, allowing for versatile control of RC crawlers, including independent front and rear wheel movement for enhanced maneuverability on challenging terrains. These modes provide optimized control for various climbing scenarios.
6.2 Anti-lock Braking System (ABS)
Figure 8: ABS Functionality.
The integrated ABS function helps coordinate vehicle cornering, preventing wheel lock-up and skidding during braking. This feature improves control and stability, especially during high-speed maneuvers or on slippery surfaces.
6.3 Failsafe Function
Figure 9: Failsafe Function in action.
The unique failsafe function allows users to set predefined values for all channels in case of signal loss, ensuring the model stops safely and preventing uncontrolled movement. This is a critical safety feature for RC enthusiasts.
6.4 Stability Control (SVC)
The SVC (Stability Control) functionality provides enhanced stability for your RC model, assisting in maintaining control during various driving conditions. This feature helps to smooth out steering and throttle inputs, making the model easier to drive.
7. Specifikationer
| Feature | Specifikation |
|---|---|
| Produktdimensioner | 3.94 x 1.97 x 1.97 tommer |
| Varens vægt | 7.1 ounce |
| Varemodelnummer | FS-GT5 |
| Producent anbefalet alder | 12 måneder og opefter |
| Mærke | Flysky |
| Speciel funktion | Failsafe Function, AFHDS 2A Protocol |
| Farve | Grøn |
| Maks. antal understøttede enheder | 20 |
| Kompatible enheder | RC Car, RC Boat |
8. Fejlfinding
- Senderen tænder ikke: Check that the batteries are correctly installed and fully charged. Ensure the battery compartment cover is securely closed.
- Modtager er ikke bindende: Confirm both the transmitter and receiver are in bind mode. Ensure the bind cable is correctly connected to the receiver's B/VCC port. Verify that the receiver is powered on.
- Kontroller, der ikke reagerer: Check the battery levels of both the transmitter and the RC model. Ensure the transmitter and receiver are properly bound. Verify that all servo connections are secure.
- Uregelmæssig kontrol: Ensure there is no interference from other 2.4GHz devices. Check for any physical damage to the antenna on both the transmitter and receiver.
9. Vedligeholdelse
- Rensning: Keep the transmitter and receiver clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using solvents or harsh chemicals.
- Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer. Fjern batterierne, hvis den opbevares i længere perioder, for at forhindre lækage.
- Inspektion: Periodically inspect all cables, connectors, and the antenna for any signs of wear or damage. Ensure all controls move freely and return to their neutral positions.
10. Garanti og support
For detailed warranty information, technical support, and service inquiries, please refer to the official Flysky webwebstedet eller kontakt din autoriserede forhandler. Gem din købskvittering som købsbevis.