AEG BEWS 18-230BL-0 230mm Brushless 18V Angle Grinder User Manual

1. Introduktion

Thank you for choosing the AEG BEWS 18-230BL-0 230mm Brushless 18V Angle Grinder. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new power tool. Please read this manual thoroughly before operating the tool and keep it for future reference. Proper use and adherence to safety guidelines will ensure optimal performance and extend the life of your angle grinder.

2. Generelle sikkerhedsoplysninger

ADVARSEL: Læs alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Undladelse af at følge alle instruktionerne nedenfor kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

2.1 Arbejdsområdesikkerhed

• Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv. Elværktøj danner gnister, som kan antænde støv eller dampe.
• Hold børn og omkringstående væk, mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.

2.2 Elektrisk sikkerhed

• Elværktøjsstik skal passe til stikkontakten. Modificer aldrig stikket på nogen måde.
• Undgå kropskontakt med jordede eller jordede overflader, såsom rør, radiatorer, komfurer og køleskabe. Der er en øget risiko for elektrisk stød, hvis din krop er jordet eller jordet.

2.3 Personlig sikkerhed

• Brug altid øjenbeskyttelse. Brug sikkerhedsbriller, beskyttelsesbriller eller ansigtsskærm.
• Brug høreværn, når du bruger elværktøj i længere perioder.
• Klæd dig ordentligt på. Bær ikke løstsiddende tøj eller smykker. Hold dit hår og tøj væk fra bevægelige dele.
• Vær opmærksom, hold øje med, hvad du laver, og brug din sunde fornuft, når du betjener et elværktøj.

2.4 Specifik sikkerhed for vinkelslibere

• Always use the guard provided with the tool. Ensure it is securely fastened and positioned for maximum safety.
• Use only grinding or cutting discs that are rated for the speed of the grinder and are of the correct diameter (230mm) and bore size (M14).
• Secure the workpiece. Never hold small pieces in your hand while grinding.
• Be aware of the 'Dead Man' Switch feature, which requires continuous pressure to operate, stopping the tool if released.
• The tool features Anti-Kickback Protection and an Electric Brake for enhanced safety. Familiarize yourself with these functions.
• The Anti-Restart System prevents accidental startup after a power interruption.

3. Produktet er slutview

The AEG BEWS 18-230BL-0 is a powerful 230mm brushless 18V cordless angle grinder designed for demanding cutting and grinding applications. It features a robust brushless motor for extended tool life and efficiency, and a Dual 18V system allowing operation with one or two batteries.

This image shows the AEG BEWS 18-230BL-0 230mm Brushless 18V Angle Grinder from a front-side view, highlighting its main body, disc guard, and auxiliary handle. The tool is orange and black.

3.1 Nøglefunktioner

• 18V Brushless Motor: Provides increased power, efficiency, and longer tool life.
• Dual 18V System: Operates with either one or two 18V batteries for flexible power options.
• 'Dead Man' Switch: Enhances user safety by stopping the tool immediately upon release.
• Beskyttelse mod tilbageslag: Reduces the risk of sudden tool movement if the disc binds.
• Elektrisk bremse: Quickly stops the disc for added safety and productivity.
• Anti-Restart System: Prevents unintentional startup after a battery change or power interruption.
• Blød start: Ensures a smooth and controlled startup, reducing jerk.
• Rotatable Anti-Vibration Rear Handle with Soft Grip: Provides comfort and control during prolonged use.
• 3-Position Anti-Vibration Auxiliary Handle: Offers versatile and comfortable grip options.

4. Opsætning

4.1 Batteriinstallation

This tool is supplied without batteries or charger. Ensure you use compatible AEG 18V Lithium-ion batteries. To install, slide the battery pack(s) into the battery port(s) until it clicks into place. To remove, press the release button and slide the battery out.

4.2 Montering af hjælpehåndtaget

The auxiliary handle can be screwed into one of the three designated positions on the gear housing. Choose the position that provides the best control and comfort for your application. Tighten securely by hand.

4.3 Montering og justering af beskyttelsesskærmen

The guard is essential for safety. Ensure it is correctly fitted and adjusted to protect against sparks and debris. Loosen the guard clamping screw, position the guard to cover the maximum amount of the disc exposed to the operator, and then tighten the screw firmly.

4.4 Montering af slibe-/skæreskiven

1. Sørg for, at værktøjet er slukket, og at batteripakken er fjernet.
2. Tryk og hold spindellåseknappen nede.
3. Placer den indre flange på spindlen.
4. Position the grinding or cutting disc onto the inner flange, ensuring it sits flat.
5. Screw the outer flange (locking nut) onto the spindle.
6. Use the supplied spanner wrench to firmly tighten the outer flange while holding the spindle lock button. Do not overtighten.

5. Betjeningsvejledning

5.1 Tænd/sluk

• Sådan tænder du: Press and hold the 'Dead Man' switch. The tool will start with a soft start.
• Sådan slukker du: Release the 'Dead Man' switch. The electric brake will quickly stop the disc.

5.2 Arbejdsteknikker

• Hold altid vinkelsliberen fast med begge hænder, i hovedhåndtaget og ekstrahåndtaget.
• Sørg for, at arbejdsemnet er sikkert klampeller holdes for at forhindre bevægelse under drift.
• For grinding, apply light pressure and move the tool evenly across the surface. Avoid excessive pressure, which can overload the tool and damage the disc.
• For cutting, use a cutting disc and make straight, controlled cuts. Do not use grinding discs for cutting.
• Lad værktøjet nå fuld hastighed, før du sætter ind i emnet.
• Be mindful of sparks and debris. Direct them away from yourself and others.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din vinkelslibers lange levetid og sikker drift.

6.1 Rengøring

• Fjern altid batteripakken før rengøring.
• Keep the ventilation openings clear to prevent overheating. Use compressed air to blow out dust from the motor housing.
• Clean the tool housing with a soft, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.

6.2 Eftersyn

• Regularly inspect the power tool for any signs of damage, such as cracks in the housing, damaged cables, or loose components.
• Check the grinding/cutting discs for wear or damage before each use. Replace damaged discs immediately.
• Ensure the guard is securely attached and undamaged.

6.3 Opbevaring

Opbevar værktøjet et tørt og sikkert sted utilgængeligt for børn. Fjern batteripakken, før du opbevarer det i længere perioder.

7. Fejlfinding

If you encounter problems with your angle grinder, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, please contact AEG customer service or an authorized service center.

8. Specifikationer

9. Garanti og support

9.1 Garantioplysninger

This AEG BEWS 18-230BL-0 Angle Grinder comes with a 1 års garanti fra købsdatoen. Gem venligst din købsbevis i forbindelse med garantikrav. Garantien dækker materiale- og fabrikationsfejl ved normal brug.

9.2 Tilgængelighed af reservedele

Spare parts for this product are available in the EU for a period of 5 år from the date of manufacture. For genuine spare parts, please contact an authorized AEG service center.

9.3 Kundesupport

For technical assistance, service, or warranty inquiries, please contact your local AEG customer service representative or visit the official AEG website for support contact details. Always provide the model number (BEWS18-230BL-0) and serial number (if applicable) when seeking support.