BERNSTEIN EX412 U-Shape Shower Enclosure

1. Introduktion

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your BERNSTEIN EX412 U-Shape Shower Enclosure. Please read all instructions carefully before beginning installation or use to ensure proper function and safety. Keep this manual for future reference.

2. Sikkerhedsinstruktioner

• Brug altid passende personlige værnemidler (PPE) under installationen, herunder sikkerhedsbriller og handsker.
• Handle glass panels with extreme care. Tempered safety glass, while strong, can shatter if struck at the edges or corners.
• Ensure the installation area is level and structurally sound to support the weight of the shower enclosure and its users.
• Spænd ikke skruerne for hårdt, da dette kan beskadige komponenter eller glas.
• Hold børn og kæledyr væk fra installationsområdet.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret fagmand.

3. Pakkens indhold

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact BERNSTEIN customer service.

• U-Shape Shower Enclosure Glass Panels (8mm tempered safety glass with nano-coating)
• Brusebakke
• High-quality chrome-plated brass hinges
• Wall mounting profiles and brackets
• Stainless steel door handle
• Adjustable stainless steel support bar
• Stainless steel towel rail
• Assembly materials (screws, seals, etc.)

4. Specifikationer

5. Opsætning og installation

The BERNSTEIN EX412 shower enclosure is designed for straightforward assembly with the included mounting materials. Follow these general steps, referring to the detailed technical drawing for precise measurements and component placement.

5.1 Kontrol før installation

• Ensure the bathroom floor and walls are prepared, waterproofed, and level.
• Confirm that the wall where the enclosure will be mounted is structurally sound.
• Pak alle komponenter ud, og kontroller dem med pakkens indholdsliste.

5.2 Installationstrin (generelt overview)

1. Position the Shower Tray: Place the included shower tray in the desired location, ensuring it is level and properly connected to the drainage system.
2. Mount Wall Profiles: Secure the wall mounting profiles to the prepared walls using the provided screws and wall plugs. Ensure they are plumb and at the correct height.
3. Install Fixed Glass Panels: Carefully place the fixed glass panels into the wall profiles and secure them. Use the adjustable stainless steel support bar to provide additional stability to the fixed panels.
4. Fastgør hængsler: Mount the high-quality chrome-plated brass hinges to the fixed glass panels and the wall, as indicated in the technical drawing.
5. Installer dørpaneler: Attach the frameless pivot door panels to the hinges. Adjust as necessary to ensure smooth operation and a tight seal when closed.
6. Install Door Handle and Towel Rail: Secure the stainless steel door handle and the stainless steel towel rail to the designated glass panels.
7. Seal and Finish: Apply silicone sealant to all external joints between the glass, wall profiles, and shower tray to ensure watertightness. Allow adequate drying time before use.

5.3 Visuelle hjælpemidler til installation

6. Vedligeholdelse og rengøring

Regular cleaning and maintenance will ensure the longevity and appearance of your BERNSTEIN EX412 shower enclosure.

6.1 Glasrengøring

• The 8mm nano-coated safety glass is designed to repel water and reduce limescale buildup.
• After each use, wipe down the glass panels with a soft cloth or squeegee to remove water droplets.
• For deeper cleaning, use a mild, non-abrasive glass cleaner and a soft cloth. Avoid harsh chemicals, abrasive sponges, or scouring powders, as these can damage the nano-coating and glass surface.
• Skyl grundigt med rent vand efter rengøring.

6.2 Frame and Hardware Cleaning

• Clean chrome-plated brass hinges, stainless steel handles, and support bars with a soft, damp klud og mild sæbe.
• Do not use abrasive cleaners, acidic solutions, or steel wool, as these can scratch or corrode the metal finishes.
• Dry all metal parts thoroughly after cleaning to prevent water spots.

6.3 Vedligeholdelse af tætninger

• Regularly inspect the silicone seals for any signs of wear, cracking, or mold.
• Clean seals with a mild anti-mold cleaner if necessary.
• If seals are damaged, they should be replaced promptly to prevent leaks.

7. Fejlfinding

This section addresses common issues you might encounter with your shower enclosure.

8. Garanti og support

BERNSTEIN products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided at the time of purchase or visit the official BERNSTEIN website. If you require technical assistance, replacement parts, or have any questions not covered in this manual, please contact BERNSTEIN customer support.

Fabrikant: RAV

Kontaktoplysninger: Please refer to your purchase documentation or the BERNSTEIN official webhjemmeside for de seneste kontaktoplysninger.