Prime-Line MP9039-2 Door Stop Instruction Manual

Produkt overview

The Prime-Line MP9039-2 is a 3-inch spring steel door stop designed to prevent door handles from impacting and damaging adjacent walls. It features a chrome-plated finish and a flexible base for versatile installation. The design includes a rubber tip to cushion impacts and protect surfaces.

Image: Prime-Line MP9039-2 Door Stop, 3 inch, Chrome. This image shows the complete door stop with its spring and rubber tip.

Nøglefunktioner:

• Prevents door handles from hitting and damaging walls.
• 3-inch reach allows mounting over baseboards or at the bottom of walls.
• Constructed from durable spring steel with a chrome-plated finish.
• Features a stamped steel base plate and a protective rubber tip.
• Includes a separate screw and mounting base for flexible installation, accommodating uneven baseboards.

Opsætning og installation

Proper installation ensures the door stop functions effectively and protects your walls. The installation method may vary slightly depending on the surface (wood, concrete, etc.).

Nødvendige værktøjer:

• Bore
• Drill bits (sizes depend on surface and anchor type)
• Hammer (for concrete installation)
• Målebånd eller lineal
• Blyant

Generelle installationstrin:

1. Bestem placering: Open the door to its maximum desired extent. Mark the spot on the wall or baseboard where the door handle would make contact. The door stop should be installed slightly before this point to prevent impact.
2. Forbered monteringsoverfladen:
   • For wood surfaces: A pilot hole may be drilled for easier screw insertion.
   • For concrete or masonry: Anchors will be required.
3. Installer monteringsbase: The door stop includes a separate mounting base and screw. This allows for the use of longer screws if needed, especially when dealing with broken baseboards.
   • Position the base plate at the marked location.
   • Secure the base plate using the provided screw(s). Ensure it is firmly attached.
4. Attach Door Stop: Screw the spring-loaded door stop into the installed mounting base until it is secure.

Specific Installation for Concrete/Laminate Flooring (as per vendor guidance):

If installing on wood laminate flooring over a concrete floor, two types of anchors are typically used: a plastic anchor and a wedge lead anchor. The center-to-center distance between these anchors is approximately 7/8 inch.

1. Bore huller:
   • For the wedge lead anchor (for the 5/16" machine screw rod): Drill a 5/8" hole into the concrete. If drilling through laminate, use a wood bit first, then a masonry bit for the concrete.
   • For the plastic anchor (for the sheet metal screw): Drill a 1/4" hole into the concrete.
2. Seat Wedge Lead Anchor: Insert the wedge lead anchor into the 5/8" hole. The cone-shaped wedge should be at the bottom. Lightly tap the rim of the anchor with a hammer to drive the wedge into the body, seating it firmly into the concrete. If installing through laminate, use a socket wrench head of the same diameter as the lead wedge to tap it down through the laminate into the concrete.
3. Insert Plastic Anchor: Insert the plastic anchor into the 1/4" hole.
4. Assemble Door Stop:
   • Insert the 5/16" machine screw rod into the wedge anchor.
   • Screw on the base of the door stop. Align the 1/4" hole of the door stop base with the plastic anchor.
   • Install the sheet metal screw into the plastic anchor to secure the base and prevent movement.

Image: An installed Prime-Line MP9039-2 Door Stop on a baseboard, preventing a white door from hitting the wall.

Betjeningsvejledning

The Prime-Line MP9039-2 Door Stop operates passively. Once installed, it acts as a physical barrier to prevent a door from opening beyond a certain point, protecting walls and door handles from damage. The flexible spring design absorbs impact, and the rubber tip provides a soft contact point.

• Ensure the door stop is securely fastened to the wall or floor.
• The door will make contact with the rubber tip of the door stop when opened fully.
• The spring mechanism allows for slight give, reducing abrupt stops and potential damage.

Opretholdelse

The Prime-Line MP9039-2 Door Stop requires minimal maintenance to ensure its longevity and appearance.

• Rensning: Wipe the chrome-plated finish with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Inspektion: Periodically check the door stop for any signs of loosening from its mounting surface. Tighten screws if necessary.
• Rubber Tip: Ensure the rubber tip is intact and not significantly worn or damaged. A damaged tip may reduce cushioning effectiveness.

Fejlfinding

Specifikationer

Image: Technical drawing showing the dimensions of the door stop, including a 3.05" length and 0.06" wire diameter.

• Model: MP9039-2
• Mærke: PRIME-LINE
• Materiale: Spring Steel (Alloy Steel)
• Slutte: Forkromet
• Længde: 3 inches (approximately 3.05 inches as per diagram)
• Tråddiameter: 0.06 tommer (som vist i diagrammet)
• Grunddiameter: 7/8 inch (0.88 inches)
• Monteringstype: Door Mount (Baseboard/Wall/Floor)
• Inkluderede komponenter: 2 door stops (in a 2-pack)
• UPC: 049793590398

Garanti og support

For specific warranty information, please refer to the product packaging or contact Prime-Line customer service directly. General return policies may apply as per the retailer's terms of sale.

If you encounter any issues or require assistance with your Prime-Line MP9039-2 Door Stop, please visit the official Prime-Line webwebsted eller kontakt deres kundesupport for vejledning.

Fabrikant: Prime-Line Products

Webwebsted: www.prime-line-products.com