hansgrohe Ecostat E Thermostatic Shower Valve Trim

1. Introduktion

This instruction manual provides essential information for the safe and proper installation, operation, and maintenance of your hansgrohe Ecostat E Thermostatic Shower Valve Trim, Model 15707821. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for concealed installation and requires the hansgrohe iBox universal plus rough (sold separately).

2. Sikkerhedsoplysninger

• Installationen skal udføres af en kvalificeret fagmand i overensstemmelse med lokale VVS- og bygningsreglementer.
• Sørg for, at hovedvandforsyningen er slukket, før du påbegynder installations- eller vedligeholdelsesarbejde.
• Beskyt produktet mod frost.
• Do not use abrasive cleaners or solvents on the finish, as this may cause damage.
• The SafetyStop feature limits hot water temperature to prevent scalding. Do not bypass this feature.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede før installation:

• Trim Plate (Escutcheon)
• Temperaturkontrolhåndtag
• Volume Control Handle
• Funktionsblok
• Monteringshardware

Note: The hansgrohe iBox universal plus rough-in valve is required for installation and is sold separately.

Image: hansgrohe Ecostat E Thermostatic Shower Valve Trim in Brushed Nickel, showing the two control handles and the trim plate.

4. Opsætning og installation

4.1 Forud for installationskrav

• Ensure the hansgrohe iBox universal plus rough-in valve (Model 01850181) is correctly installed and secured within the wall.
• Confirm that all plumbing connections to the iBox are secure and leak-free.

Image: The hansgrohe iBox universal plus rough-in valve, which is installed behind the wall and connects to the trim.

4.2 Installationstrin

1. Klargør iBoxen: Remove any protective caps or temporary covers from the iBox universal plus rough-in valve.
2. Install Function Block: Carefully align and push the function block onto the iBox. Ensure it seats properly.
3. Escutcheon-bjerget: Place the trim plate (escutcheon) over the function block and secure it to the wall using the provided mounting hardware. Ensure it is flush and level.
4. Fastgør håndtag: Install the temperature control handle and the volume control handle onto their respective spindles. Secure them with the set screws, typically located on the underside of the handles.
5. Prøve: Slowly turn on the main water supply and check for any leaks. Test the temperature and volume controls.

For detailed dimensional information, refer to the diagram below:

Image: Technical drawing showing the dimensions of the hansgrohe Ecostat E Shower Trim for installation planning.

5. Betjeningsvejledning

Your hansgrohe Ecostat E Thermostatic Shower Valve Trim features two handles for precise control:

• Temperaturkontrol: The handle on the right controls the water temperature. Rotate it to adjust the desired temperature. The integrated SafetyStop button prevents accidental scalding by requiring a deliberate press to exceed 100°F (38°C).
• Lydstyrkekontrol: The handle on the left controls the water volume. Rotate it to increase or decrease the flow of water to your shower outlet.

Image: An installed hansgrohe Ecostat E Shower Trim in a modern shower setting, demonstrating its appearance in use.

6. Vedligeholdelse

To maintain the appearance and functionality of your hansgrohe Ecostat E Shower Trim, follow these guidelines:

• Rensning: Rengør den børstede nikkelbelægning med en blød,amp cloth and a mild soap solution. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
• Undgå barske kemikalier: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or any products containing alcohol, acids, or solvents, as these can damage the finish and internal components.
• Regelmæssig inspektion: Periodically check for any signs of leaks or unusual operation. Address any issues promptly.

7. Fejlfinding

Hvis du støder på problemer med din bruserramme, kan du overveje følgende almindelige løsninger:

• Ingen vandgennemstrømning / Lav vandgennemstrømning: Check if the main water supply is fully open. Ensure the volume control handle is in the open position. Verify that the iBox universal plus rough-in valve is receiving adequate water pressure.
• Forkert temperatur: Ensure the temperature control handle is adjusted correctly. If the temperature is consistently too hot or too cold, the thermostatic cartridge may require calibration or replacement. Consult a professional plumber.
• Leaks from Trim: Turn off the water supply immediately. Check all connections for tightness. If leaks persist, the internal seals or cartridge may need inspection or replacement by a qualified technician.

For persistent problems, contact hansgrohe customer support or a certified plumber.

8. Specifikationer

9. Garantioplysninger

Hansgrohe, Inc. warrants to the original consumer purchaser that hansgrohe products will be free from defects in material and workmanship for as long as the original consumer purchaser owns both the product and the home in which the product was originally installed. For commercial purchasers, the warranty period is one (1) year from the date of purchase. The warranty period for products in Rubbed Bronze, Matte Black, and Matte White finishes is three (3) years from the date of purchase. This warranty is non-transferable.

This warranty does not cover hansgrohe products purchased from unauthorized sellers. Authorized sellers can be found on hansgrohe branded websites. Additional warranty restrictions apply. Please refer to the manufacturer's official webwebstedet for at få alle garantioplysninger og vilkår.

10. Support

For technical assistance, replacement parts, or further inquiries regarding your hansgrohe Ecostat E Thermostatic Shower Valve Trim, please contact hansgrohe customer service directly. You can find contact information on the official hansgrohe webwebsted.