SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Introduktion

Tak for købetasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Nøglefunktioner

One-stop gig solution for classic rock players with all necessary core effects.
Analog Plexi-style distortion for 80s/90s hard rock tones.
Analog BBD-style chorus for warm, dreamy soundscapes.
500ms analog voice delay and high-quality reverb for expansive, spacy tones.
Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Hvad er der i æsken

SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
XLR-kabel
Strømadapter (9V DC)
Brugermanual

4. Opsætningsvejledning

4.1 Strømtilslutning

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Lydforbindelser

Guitar input: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
Output til Amplifier/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
Hovedtelefonudgang: For silent practice, connect headphones to the 'PHONES' jack.

SONICAKE RockStage pedal with input and output jacks — Figur 1: Overview af SONICAKE RockStage pedal, showing input, output, and power connections.

SONICAKE RockStage pedal connected to guitar and amplivligere — Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Betjeningsvejledning

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Effektmoduler

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Forsinkelse, Rumklang — Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.

Kor: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
Klippe Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
Forsinke: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
rumklang: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activating/Deactivating Effects

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted — Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage miljøer.

SONICAKE RockStage pedal showing illuminated LED knobs — Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Bærbarhed

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag — Figure 6: The compact design allows for easy transport and setup.

6. Specifikationer

Feature	Detalje
Mærke	SONICAKE
Modelnavn	KLIPPERTAGE (QCE-10)
Dimensioner	40L x 7l x 5.5H cm
Voltage	9 volt
Ampslette	20 mioampere
Lydudgangseffekter	Overdrive, Distortion, Chorus, Reverb, Delay
Kontroltype	Knap, Drejeknap
Strømkilde	Elektrisk med ledning
Hardware-interface	Multiple Audio
Signalformat	Analog
Connector Type	3.5 mm Audio Jack
Oprindelsesland	Kina

7. Vedligeholdelse

Rensning: Brug en blød, tør klud til at rengøre pedalen. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
Opbevaring: Opbevar pedalen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
Håndtering: Undgå at tabe pedalen eller udsætte den for kraftige stød.
Magt: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8. Fejlfinding

Ingen lyd:
- Sørg for, at alle kabler er korrekt tilsluttet.
- Verify the power adapter is correctly plugged in and providing power.
- Check your guitar and ampindstillinger for lifier-volumen.
- Test med forskellige kabler for at udelukke defekte forbindelser.
Uønsket støj/brummen:
- Ensure you are using the correct power adapter.
- Prøv at bruge en anden stikkontakt.
- Keep the pedal away from other electronic devices that may cause interference.
Effect Not Activating:
- Press the footswitch firmly. The LED should illuminate.
- Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Garanti og support

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a 1 års produktgaranti fra købsdatoen.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE webwebsted.