Heller 250mm Extractor Bathroom/Laundry Exhaust Fan with LED Light User Manual

1. Introduktion

Tak for købetasing the Heller 250mm Extractor Bathroom/Laundry Exhaust Fan with LED Light. This manual provides important information regarding the installation, operation, and maintenance of your new exhaust fan. Please read this manual thoroughly before installation and retain it for future reference.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for brand, elektrisk stød eller personskade.

• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter.
• Sørg for, at strømforsyningen er afbrudt før installation, vedligeholdelse eller rengøring.
• This appliance is suitable for ceiling installation only. Do not install on walls.
• Brug ikke denne blæser med nogen solid-state hastighedsregulator.
• Sørg for korrekt jording for at reducere risikoen for elektrisk stød.
• Keep foreign objects away from the fan blades during operation.
• The LED light is integrated and not user-replaceable.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Heller 250mm Extractor Bathroom/Laundry Exhaust Fan with LED Light unit
• Aftageligt gitter
• Cut-out skabelon
• Cord (integrated)
• Brugervejledning (dette dokument)

Figure 3.1: Heller 250mm Extractor Fan with LED Light. This image displays the fan's circular design, featuring a white outer casing and black internal blades, with the Heller brand name visible in the center.

4. Opsætning og installation

This product is designed for DIY installation, but electrical connections should be made by a qualified professional.

4.1 Tjekliste før installation

• Ensure the ceiling space has a minimum clearance of 100mm above the unit for proper ventilation.
• The fan requires a cut-out size of Ø290mm. Use the provided cut-out template.
• Verify power supply is 220-240V.
• Confirm the installation location is suitable for a bathroom, ensuite, or laundry room.

4.2 Installationstrin

1. Afbryd strømmen: Sluk for strømmen ved hovedafbryderen, før du påbegynder noget elektrisk arbejde.
2. Forbered åbning: Using the provided cut-out template, mark and cut a Ø290mm hole in the ceiling.
3. Position Ventilator: Insert the fan unit into the prepared ceiling opening. Ensure it is securely seated. The maximum height of the unit is 154mm, with 128mm above the ceiling.
4. Elektrisk tilslutning: Connect the fan's cord to the main power supply. This step skal be performed by a qualified electrician. Ensure all connections are secure and properly insulated.
5. Sikker enhed: Use appropriate fasteners (not supplied) to secure the fan housing to the ceiling joists or framing.
6. Fastgør gitter: Once the fan is securely installed and wired, attach the removable grille by aligning it with the fan housing and snapping it into place.
7. Gendan strøm: Once installation is complete and all connections are checked, restore power at the main circuit breaker.

5. Betjeningsvejledning

The Heller exhaust fan is designed for simple operation.

• Tænd/sluk: The fan and LED light are typically controlled by a standard wall switch connected during installation. Flip the switch to turn the unit on or off.
• Ventilation: Allow the fan to operate for a sufficient period after showering or bathing to effectively remove moisture and odors from the room.
• LED lys: The integrated 8W LED light provides energy-efficient illumination (up to 6000K). It operates concurrently with the fan.

6. Vedligeholdelse

Regular cleaning will ensure optimal performance and longevity of your exhaust fan.

6.1 Cleaning the Grille and Fan Blades

1. Afbryd strømmen: Sluk altid for strømmen til ventilatoren ved afbryderen inden rengøring.
2. Fjern gitter: Gently pull down or unclip the removable grille from the fan housing.
3. Rengør gitter: Wash the grille with mild soap and water. Rinse thoroughly and allow it to dry completely before reattaching.
4. Rengør ventilatorblade: Carefully wipe the fan blades and interior housing with a damp cloth. Do not use abrasive cleaners or solvents. Ensure no water enters the motor housing.
5. Genmonter gitteret: Når den er ren og tør, skal du sætte gitteret på ventilatorhuset igen.
6. Gendan strøm: Gendan strømmen ved afbryderen.

Note: The motor is a ball bearing type and does not require lubrication. The LED light is not user-serviceable.

7. Fejlfinding

If you experience issues with your exhaust fan, refer to the table below for common problems and solutions.

If the problem persists after attempting these solutions, please contact Heller customer support.

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please contact Heller customer service. Keep your proof of purchase for any warranty claims.

Kontaktoplysninger: Please refer to the Heller official webwebstedet eller din købsdokumentation for at få de seneste kontaktoplysninger.