Lutron Diva Reverse-Phase (ELV) Dimmer Switch DVRP-253P-WH Instruction Manual

1. Introduktion

This manual provides instructions for the installation and operation of the Lutron Diva Reverse-Phase (ELV) Dimmer Switch, model DVRP-253P-WH. This dimmer is designed for use with 250W LED/CFL and 500W Incandescent/Halogen/ELV reverse phase applications. It features a paddle-style switch for on/off control and a slide control for adjusting light levels. A neutral wire connection is required for proper operation.

2. Vigtige sikkerhedsoplysninger

• ADVARSEL: Risk of Electric Shock. May result in serious injury or death. Turn off power at circuit breaker or fuse before installing.
• Installer i overensstemmelse med alle nationale og lokale elektriske koder.
• Denne enhed skal installeres af en kvalificeret elektriker eller uddannet personale.
• Do not use with standard (forward phase) dimmers. This is a reverse-phase dimmer.
• En neutral ledning er påkrævet til installation.
• Kun til indendørs brug.
• Driftstemperaturområde: 32°F til 104°F (0°C til 40°C).

3. Hvad er der i æsken

Pakken indeholder følgende komponenter:

• Lutron Diva Reverse-Phase (ELV) Dimmer Switch (DVRP-253P-WH)
• Installationsvejledning

Image: The Lutron Diva Reverse-Phase Dimmer Switch (DVRP-253P-WH) shown installed in a kitchen setting, demonstrating its aesthetic integration.

4. Opsætning og installation

Before beginning installation, ensure power is turned off at the circuit breaker. This dimmer requires a neutral wire connection. If you are unsure about wiring, consult a qualified electrician.

4.1 Ledningsdiagram ovenforview

The Diva Reverse-Phase Dimmer is designed for single-pole or 3-way applications. Refer to the detailed wiring instructions provided with your dimmer switch. The dimmer connects to the line (hot), load (to light fixture), neutral, and ground wires.

Billede: En detaljeret view of the Lutron Diva Reverse-Phase Dimmer, highlighting its components: the paddle switch, slide control, and indicating its suitability for 3-way control of low voltage lights and fit into standard decorator-style openings.

4.2 Trin-for-trin installation

1. Sluk for strømmen: Locate your circuit breaker panel and turn off the power to the switch you are replacing.
2. Fjern eksisterende switch: Carefully remove the wallplate and unscrew the existing switch from the wall box. Disconnect the wires.
3. Identificér ledninger: Identify the line (hot), load, neutral, and ground wires. The neutral wire is typically white.
4. Tilslutning af lysdæmperen: Connect the wires from the wall box to the corresponding wires on the Lutron Diva dimmer. Ensure all connections are secure.
   • Black wire (dimmer) to Line (hot) wire (wall box)
   • Red wire (dimmer) to Load wire (to light fixture)
   • White wire (dimmer) to Neutral wire (wall box)
   • Green wire (dimmer) to Ground wire (wall box)
5. Monter lysdæmperen: Carefully push the wired dimmer into the wall box and secure it with screws.
6. Installer vægplade: Attach the coordinating Claro wallplate (sold separately) over the dimmer.
7. Gendan strøm: Tænd for strømmen igen ved afbryderen.

For 3-way installations, refer to the specific wiring diagrams included in the product packaging. This dimmer is specifically designed for reverse-phase (ELV) loads. Using it with forward-phase loads may result in improper operation or damage.

Image: An illustration comparing Forward Phase Control, optimal for LEDs, Incandescent/Halogen, and MLV transformers, with Reverse Phase Control, which is optimal for LEDs and ELV transformers. This highlights the specific application of the Diva Reverse-Phase Dimmer.

5. Betjeningsvejledning

The Lutron Diva Reverse-Phase Dimmer offers intuitive control over your lighting.

• Tænd/sluk lys: Press the large paddle switch to turn the lights on or off. When turned on, the lights will return to the previously set dimming level.
• Justering af lysstyrke: Use the small slide control located next to the paddle switch to adjust the light level. Slide up to increase brightness and down to decrease brightness.
• Locator Light: A soft locator light glows in the off position, making the dimmer easy to find in the dark.

Image: The Lutron Diva Dimmer Switch integrated into a modern living room, demonstrating how it can enhance the ambiance by controlling lighting levels.

6. Vedligeholdelse

The Lutron Diva Dimmer Switch requires minimal maintenance.

• Rensning: Clean the dimmer and wallplate with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Ingen dele, der kan serviceres af brugeren: Der er ingen dele inde i lysdæmperen, som brugeren kan servicere. Forsøg ikke at åbne eller reparere enheden.

7. Fejlfinding

8. Specifikationer

• Model: DVRP-253P-WH
• Mærke: Lutron
• Type: Reverse-Phase (ELV) Dimmer Switch
• Belastningskompatibilitet: 250W LED/CFL, 500W Incandescent/Halogen/ELV
• Voltage: 120V~ 60Hz
• Kredittype: Enkeltpolet / 3-vejs
• Neutral ledning: Påkrævet
• Driftstemperatur: 32°F til 104°F (0°C til 40°C)
• Dimensioner (L x B x H): 4.8 x 3.12 x 4.8 tommer
• Materiale: Brass, Copper (Contact Material)
• Certificeringer: UL Listed, IP54

9. Support

For technical assistance, wiring questions, or product support, please contact Lutron's 24/7 customer support.

Lutron 24/7 Support: 844-588-7661