Lenco L-30BK Belt Drive Turntable Instruction Manual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your Lenco L-30BK Belt Drive Turntable. Please read these instructions thoroughly before using the device and retain them for future reference. The Lenco L-30BK is designed for playing vinyl records at 33 and 45 RPM, featuring a built-in preamplifier and USB connectivity for digitizing your vinyl collection.

2. Sikkerhedsoplysninger

• Strømkilde: Sørg for, at strømforsyningen voltage opfylder de krav, der er angivet på enheden. Brug kun den medfølgende strømadapter.
• Vand og fugt: Udsæt ikke enheden for regn, fugt eller dryppende/sprøjtende væsker. Placer ikke genstande fyldt med væsker, såsom vaser, på enheden.
• Ventilation: Sørg for tilstrækkelig ventilation. Bloker ikke ventilationsåbningerne.
• Varme: Hold enheden væk fra varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (herunder ampløftere), der producerer varme.
• Rensning: Tag stikket ud af stikkontakten før rengøring. Brug en blød, tør klud. Brug ikke flydende rengøringsmidler eller sprayrengøringsmidler.
• Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.
• Placering: Place the turntable on a stable, level surface to prevent vibrations and ensure proper playback.

3. Pakkens indhold

Please check that all items listed below are included in the package:

• Lenco L-30BK Turntable Unit
• Støvdæksel
• Platter
• Kør bælte
• slipmat
• AC strømadapter
• USB kabel
• RCA lydkabel
• Instruktionsmanual
• Pick-up Needle (pre-installed on cartridge)

4. Produktet er slutview

Familiarize yourself with the components of your Lenco L-30BK turntable.

Figur 4.1: Front view of the Lenco L-30BK Turntable with the dust cover open, revealing the main components including the platter, tonearm, and control buttons.

Figur 4.2: Rear panel connections of the Lenco L-30BK, including RCA audio outputs (L/R), USB port, DC12V power input, and the main power switch.

Nøglekomponenter:

• Fad: The circular platform where records are placed.
• Tonearm: Indeholder pickupen og pennen, som aflæser pladens riller.
• Cartridge and Stylus: Converts physical vibrations into electrical signals. The L-30BK features a Movable Magnet Sensor (MMC) with an individually replaceable stylus.
• Hastighedsvælger: Switch to select between 33 and 45 RPM playback speeds.
• Automatisk slukning: Stopper automatisk pladerotationen ved slutningen af ​​en plade.
• Støvdæksel: Beskytter pladespilleren mod støv, når den ikke er i brug.
• RCA Audio Outputs (L/R): Til tilslutning til en ekstern amplifier eller aktive højttalere.
• USB-port: For connecting to a computer to digitize vinyl records.
• DC12V strømindgang: Til tilslutning af strømadapteren.

5. Opsætning

5.1 Udpakning og placering

1. Tag forsigtigt pladespilleren ud af emballagen.
2. Place the unit on a stable, level surface, away from direct sunlight, heat sources, and excessive dust or vibrations.
3. Installer støvdækslet ved at justere hængslerne med rillerne på bagsiden af ​​pladespilleren.

Figur 5.1: The Lenco L-30BK Turntable with its protective dust cover closed, ready for placement.

5.2 Montering af plade og bånd

1. Place the platter onto the turntable spindle.
2. Find drivremmen, som typisk findes under pladen eller er pakket separat.
3. Carefully stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
4. Placer slipmatten oven på fadet.

5.3 Lydforbindelse

The L-30BK has a built-in preamplifier, allowing direct connection to most audio systems.

• Connect the RCA audio cable (red for right channel, white for left channel) from the AUDIO OUT jacks on the rear of the turntable to the LINE IN or AUX IN jacks on your amplifier eller aktive højttalere.

5.4 Strømtilslutning

• Connect the DC12V power adapter to the DC12V POWER input on the rear of the turntable.
• Sæt strømadapteren i en passende stikkontakt.

5.5 USB Connection (for Digitization)

• To digitize your vinyl records, connect the USB cable from the USB port on the rear of the turntable to an available USB port on your computer (PC or Mac).

6. Betjeningsvejledning

6.1 Tænd/sluk

• Flip the ON/OFF switch on the rear panel to the 'ON' position to power on the turntable.
• Flip the switch to 'OFF' when not in use.

6.2 Afspilning af en plade

1. Placer en plade på fadet, og sørg for, at den er centreret.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector switch. For 45 RPM singles, place the included adapter on the spindle if needed.
3. Løft tonearmen ved hjælp af cue-håndtaget.
4. Placer tonearmen manuelt over den ønskede startrille på pladen.
5. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record, and playback will begin.
6. At the end of the record, the auto shut-off function will stop the platter rotation. Lift the tonearm and return it to its rest.

Figur 6.1: Proper technique for lowering the tonearm onto a record for playback.

Figur 6.2: Detaljeret view of the Movable Magnet Sensor (MMC) cartridge and stylus assembly.

6.3 Digitizing Records via USB

The L-30BK allows you to convert your vinyl records into digital audio filebruger en computer.

1. Tilslut pladespilleren til din computer med det medfølgende USB-kabel.
2. Download and install audio recording software such as Audacity (available online for free) on your computer.
3. Open the recording software and select the USB Audio Device as the input source.
4. Start recording in the software, then begin playing your record on the turntable as described in section 6.2.
5. Once the record finishes, stop the recording in the software and save your digitized audio file.

7. Vedligeholdelse

7.1 Rengøring af drejeskiven

• Tag altid stikket ud af stikkontakten til pladespilleren, inden den rengøres.
• Brug en blød, tør og fnugfri klud til at tørre kabinettet og støvdækslet af.
• Brug ikke slibende rengøringsmidler, voks eller opløsningsmidler, da de kan beskadige finishen.

7.2 Pleje og udskiftning af pennen

• Pennen er en sart komponent. Undgå at røre ved den med fingrene.
• Clean the stylus regularly using a soft brush, gently brushing from back to front.
• The stylus should be replaced after approximately 300-500 hours of playback, or if you notice a degradation in sound quality.
• To replace the stylus, carefully pull the old stylus assembly forward and down from the cartridge. Insert the new stylus assembly by pushing it upwards and backwards into the cartridge until it clicks into place.

8. Fejlfinding

If you encounter problems with your turntable, refer to the following common issues and solutions:

9. Specifikationer

10. Garanti og support

Lenco products are manufactured to high quality standards. In the event of a defect, your product is covered by the terms of the warranty in your country of purchase. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lenco website. For technical support or service inquiries, please contact Lenco customer service through their official channels.