PWR+ AC Adapter Instruction Manual for Booster PAC Jump Starters

1. Introduktion

This manual provides instructions for the safe and effective use of the PWR+ AC Adapter, model PWR-TAH19012N. This adapter is designed to provide power and charge compatible Booster PAC and CarStart jump starter models.

Image 1: The PWR+ AC Adapter with its integrated power cord.

2. Vigtige sikkerhedsoplysninger

Read all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• UL-listet: This PWR+ AC Adapter is Tested, Approved, and Certified by UL/ULC (Underwriters Laboratories). The unique E475124 number is verifiable on the UL website, ensuring compliance with safety standards.
• Kun indendørs brug: Use this adapter in dry, indoor environments only. Do not expose to rain or moisture.
• Korrekt ventilation: Ensure adequate ventilation around the adapter during use. Do not cover the adapter or place it in an enclosed space.
• Undgå skader: Brug ikke adapteren, hvis ledningen eller stikket er beskadiget. Forsøg ikke at åbne eller reparere adapteren.
• Indbyggede beskyttelser: The adapter features Short Circuit Protection (SCP), Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP) for enhanced safety.

Image 2: UL certification logo and a visual comparison highlighting the safety certification of the PWR+ adapter.

3. Pakkens indhold

Pakken indeholder følgende vare:

• 1 x PWR+ AC Adapter (Model: PWR-TAH19012N)

Image 3: The PWR+ AC Adapter shown with its packaging.

4. Opsætningsvejledning

1. Undersøg adapteren: Før første brug skal du kontrollere AC-adapteren og dens ledning for tegn på skader. Må ikke anvendes, hvis den er beskadiget.
2. Opret forbindelse til enhed: Locate the charging port on your compatible Booster PAC or CarStart jump starter. Insert the barrel connector of the PWR+ AC Adapter firmly into the device's charging port.
3. Tilslut til stikkontakten: Plug the AC adapter's two-prong plug into a standard 110-240V wall outlet. Ensure the outlet is easily accessible.

The adapter features an extra-long 6.7 ft cord for flexible placement.

5. Betjeningsvejledning

Once connected, the PWR+ AC Adapter will begin charging your Booster PAC or CarStart jump starter. The charging indicator on your jump starter will typically illuminate or change state to indicate charging status. Refer to your jump starter's manual for specific charging indicators.

• Opladningstid: Charging time varies depending on the jump starter model and its current battery level.
• Afbrydelse: Once your device is fully charged, disconnect the adapter from the wall outlet first, then from your jump starter.
• Kontinuerlig forbindelse: While the adapter has built-in safety features, it is generally recommended to disconnect the charger once the device is fully charged to prolong battery life.

6. Kompatibilitet

This PWR+ AC Adapter is compatible with a wide range of Booster PAC and CarStart jump starter models, including but not limited to:

• Booster PAC ES6000, ES5000, ES5000C, ES2500, ES2500C, ES2500KE, ES1224
• Booster PAC J850, J900, J1000, J2000 Truck Pac Charger
• Booster PAC P/N: ESA214, ESA217, ESA218, ESA22, 141-003-000, 141-004-000, 141-337-000, DC1500500, GPU48180500WDOO, GPU481801000WD00
• CarStart CS1000, CS1200 Power Battery Booster
• Solar ES6000, ES6000KE, ES5000SOL, ES5000ESP5500, TCB-ESA217, ESA22, ES2500KE, ES2500SOL, ES2500KE, ESA217, ES5000ESP5500, J900-SOL, ESA-22, J850 Truck Pac Battery Booster Jump Starter

Billede 4: En eksample of a compatible device, the Booster PAC ES2500 jump starter.

7. Specifikationer

Billede 5: Detaljeret view of the adapter's internal cable structure and built-in safety protections.

8. Fejlfinding

• Enheden oplades ikke:
  • Ensure the adapter is securely plugged into both the jump starter and the wall outlet.
  • Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.
  • Check if your jump starter model is listed in the compatibility section.
  • Inspect the adapter cord and connector for any visible damage.
• Overophedning af adapter:
  • Sørg for, at adapteren er placeret et godt ventileret område og ikke er tildækket.
  • Hvis overophedningen fortsætter, skal du stoppe brugen og kontakte kundesupport.

9. Pleje og vedligeholdelse

• Rensning: Disconnect the adapter from power before cleaning. Use a dry, soft cloth to wipe the adapter. Do not use liquid cleaners.
• Opbevaring: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cord too tightly around the adapter to prevent damage.
• Håndtering: Undgå at tabe adapteren eller udsætte den for hårde stød.

10. Garanti og support

This PWR+ AC Adapter comes with a 30-dages tilbagebetalingspolitik og en 24 måneders ombytningsgaranti. PWR+ is a company based in Washington, USA, committed to customer satisfaction.

For warranty claims, technical support, or any inquiries, please contact PWR+ customer service through the retailer where the product was purchased or visit the official PWR+ webwebsted.