Digitalt LCD-vækkeur med temperatursensor DS 2618 brugermanual

Indledning

Tak for købetasing the Digital LCD Alarm Clock with Temperature Sensor DS 2618. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual carefully before use and retain it for future reference.

Produkt overview

The DS 2618 is a versatile digital alarm clock featuring a clear LCD display, an integrated temperature sensor, and essential alarm functions. Its compact design makes it suitable for various environments.

Figur 1: Front view of the alarm clock with its display showing time, date, and temperature in a non-illuminated state.

Figur 2: Front view of the alarm clock with its display illuminated, showing time, city code, and temperature.

Figur 3: Bag view of the alarm clock, highlighting the control buttons and the battery compartment.

Kontrolknapper:

• KØRSELSVEJLEDNING: Cycles through display modes (Time, Alarm, Date) and confirms settings.
• SÆT: Går i indstillingstilstand for tid, dato og alarm.
• OP (▲): Øger værdierne under indstilling.
• NED (▼): Reducerer værdier under indstilling.
• TIMER: Activates or deactivates the timer function (if available).
• LIGHT/SNOOZE (Top Button): Illuminates the display temporarily and activates the snooze function when the alarm sounds.

Opsætning

1. Batteriinstallation

1. Find batteridækslet på bagsiden af ​​enheden (se figur 3).
2. Skub eller løft dækslet for at åbne rummet.
3. Isæt de nødvendige batterier (typisk AAA, medfølger ikke) i henhold til polaritetsindikatorerne (+ og -) i batterirummet.
4. Sæt batterirummets dæksel på igen.

The clock should power on automatically once batteries are inserted. If the display remains blank, check battery orientation or replace with fresh batteries.

Betjeningsvejledning

1. Indstilling af tid og dato

1. Tryk på MODE button repeatedly until the time display is active.
2. Tryk og hold på SÆT -knappen i cirka 3 sekunder, indtil timecifret begynder at blinke.
3. Brug UP or NED knapper for at justere timen.
4. Trykke SÆT for at bekræfte timen og gå videre til minutindstillingen.
5. Brug UP or NED knapper for at justere minutterne.
6. Fortsæt med at trykke SÆT for at gennemgå og indstille år, måned og dag ved hjælp af UP or NED knapper.
7. Trykke MODE or wait for 10 seconds without input to exit the setting mode.

2. Indstilling af alarmen

1. Tryk på MODE button until the alarm time is displayed (often indicated by an alarm icon).
2. Tryk og hold på SÆT button for approximately 3 seconds until the alarm hour digit starts flashing.
3. Brug UP or NED knapper for at justere alarmtiden.
4. Trykke SÆT to confirm the alarm hour and move to the alarm minute setting.
5. Brug UP or NED knapper til at justere alarmens minutter.
6. Trykke MODE or wait for 10 seconds without input to exit the alarm setting mode.

3. Aktivering/deaktivering af alarmen

While in alarm display mode, press the UP button to toggle the alarm ON or OFF. An alarm icon will appear on the display when the alarm is active.

4. Snooze-funktion og baggrundsbelysning

Når alarmen lyder, skal du trykke på LYS / SNOOZE button located on the top of the clock to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes). Pressing any other button will turn off the alarm until the next set time.

Tryk på LYS / SNOOZE knappen når som helst for at lyse displayet op i et par sekunder.

5. Temperaturvisning

The clock automatically displays the ambient temperature. The unit of temperature (Celsius or Fahrenheit) can usually be toggled by pressing the NED button while in normal time display mode, or by a dedicated switch in the battery compartment.

Opretholdelse

• Rensning: Tør uret af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Udskiftning af batteri: Replace batteries when the display becomes dim or functions become erratic. Always replace all batteries at the same time with new ones.
• Opbevaring: Hvis uret ikke skal bruges i længere tid, skal batterierne fjernes for at forhindre lækage.

Fejlfinding

• Skærmen er tom eller svag: Check battery installation. Replace batteries with fresh ones.
• Alarmen lyder ikke: Ensure the alarm is activated (alarm icon visible). Check alarm time settings.
• Forkert tidspunkt/dato: Re-enter setting mode and adjust time/date as per instructions.
• Temperaturmålingen virker unøjagtig: Ensure the clock is placed away from direct sunlight, heat sources, or air conditioning vents that could affect local temperature readings.

Specifikationer

• Model: DS 2618
• Vise: LCD digital
• Funktioner: Time, Date, Alarm, Temperature Display
• Dimensioner: Cirka 18 x 12 x 6 cm (7.1 x 4.7 x 2.4 tommer)
• Vægt: Cirka 200 g (0.44 lbs)
• Strømkilde: Batteries (type not specified, typically AAA, not included)

Garanti og support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration. For technical support or service inquiries, please contact your retailer or the point of purchase.