BIKEVEE Kablet Cykelcomputer BKV-04 Brugermanual

1. Introduktion

Thank you for choosing the BIKEVEE Wired Bicycle Computer BKV-04. This device is designed to provide accurate and essential cycling data, enhancing your riding experience. This manual will guide you through the installation, operation, and maintenance of your new bicycle computer. Please read it carefully before use to ensure optimal performance and longevity of the product.

2. Produktet er slutview

Nøglefunktioner

• Ur: 12H/24H format display.
• Stopur: Integrated timer for tracking ride duration.
• Enhedsvalg: Metric (km/h) or Imperial (m/h) alternative.
• Scanningstilstand: Automatic circulation through various data displays.
• Auto ON/OFF: Automatically powers on and off with bicycle movement.
• Realtidsdata: Displays Current Speed, Average Speed, and Maximum Speed.
• Turdata: Tracks Ride Time and Trip Distance.
• Kilometertæller: Records total accumulated distance (ODO meter).
• LED baggrundsbelysning: Green LED backlight for visibility in low-light conditions.
• Vandtæt Design: Holdbar konstruktion til brug i al slags vejr.
• Vise: Big and bright display for easy readability.
• Batterilevetid: Designet til lang batterilevetid.

Pakkens indhold

The BIKEVEE BKV-04 bicycle computer unit, featuring a clear LCD display showing time, speed, odometer, ride time, and distance.

The bicycle computer display illuminated with its green LED backlight, enhancing visibility in dim conditions.

All components included in the package: the computer unit, wired sensor, mounting bracket, magnet, rubber ring, rubber slice, and cable ties.

A diagram illustrating each component and its name: cycle computer, bracket, bracket seat, induced magnet, wired computer sensor, rubber ring, rubber slice, and belt (cable tie).

• BIKEVEE Bicycle Computer Unit
• Kablet hastighedssensor
• Mounting Bracket and Bracket Seat
• Hjulmagnet
• Gummi ring
• Rubber Slice (for padding)
• Cable Ties (Belt)
• Battery (CR2032, pre-installed or included separately)

3. Opsætning og installation

3.1 Batteriinstallation

The computer uses a CR2032 button cell battery. If not pre-installed, open the battery cover on the back of the unit (usually by twisting counter-clockwise with a coin) and insert the battery with the positive (+) side facing up. Close the cover securely.

Bag view of the computer unit, showing the twist-lock battery compartment for the CR2032 battery.

3.2 Montering af beslaget

1. Choose a suitable location on your handlebar or stem for the bracket seat.
2. Place the rubber slice (if provided) between the bracket seat and the handlebar to prevent slipping and protect the surface.
3. Secure the bracket seat using the provided cable ties (belts). Ensure it is firmly attached and does not rotate.
4. Slide the main bracket onto the bracket seat until it clicks into place.

3.3 Installing the Sensor and Magnet

1. Attach the wired speed sensor to the front fork of your bicycle using cable ties. Position it so that the sensor head is aligned with the wheel spokes.
2. Mount the magnet onto a spoke of the front wheel. Ensure the magnet is positioned to pass directly in front of the sensor head with a gap of approximately 1-3 mm. The magnet should not touch the sensor.
3. Route the sensor wire neatly along the fork and up to the handlebar, securing it with cable ties to prevent it from interfering with moving parts.
4. Plug the sensor wire into the port on the back of the computer's mounting bracket.

3.4 Attaching the Computer Unit

Slide the BIKEVEE computer unit onto the mounted bracket until it locks securely. Ensure it is facing you for easy viewunder din køretur.

4. Betjeningsvejledning

Bund view of the computer unit, showing the 'M' (Mode) and 'S' (Set) buttons for navigation and settings.

4.1 Knapfunktioner

• 'M' (Tilstand)-knap: Press to cycle through different display modes (e.g., ODO, DST, MXS, AVS, TM). In setting mode, it confirms selections.
• 'S' (Set) Button: Press to enter setting mode or adjust values within setting mode. In normal display, it can activate the backlight or reset certain values.

4.2 Initial Settings (Wheel Circumference, Time, Units)

Upon first use or after battery replacement, you may need to set the wheel circumference, time, and measurement units.

1. Hjulomkreds: Refer to your bicycle tire's sidewall for its size (e.g., 700x23C, 26x1.95). Consult a wheel circumference chart (available online) to find the corresponding value in millimeters (mm). Enter this value into the computer. This is crucial for accurate speed and distance readings.
2. Enhedsindstilling: Select between Kilometers per Hour (KM/H) or Miles per Hour (M/H) as your preferred unit of speed and distance.
3. Indstilling af ur: Set the current time (12H or 24H format).

Typically, you enter setting mode by pressing and holding the 'M' or 'S' button (refer to specific instructions in your included manual if different). Use 'S' to change values and 'M' to confirm and move to the next setting.

4.3 Visningstilstande og -funktioner

• SPD (aktuel hastighed): Viser din cykelhastighed i realtid.
• ODO (kilometertæller): Shows the total accumulated distance. This value is usually stored even when the battery is removed.
• DST (rejseafstand): Displays the distance covered during the current ride. Can be reset for each trip.
• MXS (Maksimal hastighed): Shows the highest speed achieved during the current ride.
• AVS (gennemsnitshastighed): Calculates the average speed for the current ride.
• TM (Ride Time): Displays the duration of the current ride.
• SCAN: Automatically cycles through DST, MXS, AVS, and TM displays.
• Baggrundsbelysning: Press the 'S' button (or as per specific model instructions) to activate the green LED backlight for a few seconds.

4.4 Resetting Trip Data

To reset Trip Distance (DST), Maximum Speed (MXS), Average Speed (AVS), and Ride Time (TM) for a new ride, typically press and hold the 'S' button while in the DST or TM display mode until the values reset to zero. The Odometer (ODO) cannot be reset.

5. Vedligeholdelse

• Rensning: Tør computerenheden og sensoren af ​​med en blød kludamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Udskiftning af batteri: Replace the CR2032 battery when the display becomes dim or erratic. Follow the battery installation steps.
• Opbevaring: If storing the bicycle computer for an extended period, consider removing the battery to prevent leakage. Store in a cool, dry place.
• Sensor-/magnetjustering: Periodically check the alignment of the sensor and magnet to ensure the 1-3mm gap is maintained for accurate readings.

6. Fejlfinding

7. Tekniske specifikationer

8. Garanti og support

For garantioplysninger og kundesupport henvises til den dokumentation, der blev leveret ved køb, eller kontakt din forhandler. Gem din købsbevis i tilfælde af garantikrav.

For further assistance or technical queries, please reach out to BIKEVEE customer service through their official channels.