Lepro Industrial LED Desk Lamp

Indledning

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Denne alsidige lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Læs venligst denne manual grundigt inden installation og ibrugtagning, og gem den til senere brug.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Sikkerhedsinstruktioner

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Brug kun E27-fatningspærer med en maksimal watttage på 40W.
• Brug ikke lamp med en beskadiget strømledning eller stik.
• Dette produkt er kun beregnet til indendørs brug. Må ikke udsættes for vand eller høj luftfugtighed.
• Behold lamp væk fra brændbare materialer.
• Forsøg ikke at adskille eller reparere lamp dig selv. Kontakt kvalificeret personale for service.

Pakkens indhold

Tjek venligst pakken for følgende varer:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Brugermanual

Bemærk: E27-pæren er ikke inkluderet og skal købes separat.

Opsætning og installation

Follow these steps to assemble and install your desk lamp:

1. Fastgør Clamp: Fastgør clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Saml Lamp Hoved: Installer lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Indsæt armen: Indsæt forsigtigt lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Installer pæren: Sørg for at lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp stikkontakten. Spænd ikke for hårdt.
5. Tilslut til strøm: Tilslut lamp's power cord into a suitable electrical outlet.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Billede: L'etamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Betjeningsvejledning

Tænd/sluk: Locate the rocker switch on the power cord. Press the switch to turn the lamp til eller fra.

Justering af lysvinklen: Lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Billede: L'etamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Opretholdelse

Rensning: For at rense lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Udskiftning af pære: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp ind igen.

Fejlfinding

• Lamp tænder ikke:
  • Kontroller, om netledningen er sat ordentligt i stikkontakten.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Kontroller stikkontakten ved at tilslutte en anden enhed.
• Lyset flimrer:
  • Sørg for, at pæren er skruet godt i.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Kontroller for løse forbindelser i netledningen eller stikkontakten.
• Lamp er ustabil:
  • Sørg for at clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Kontroller, at lamp arm is properly inserted into the clamp led.

Specifikationer

Image: Product dimensions and key features like E27 bulb base and power cord length.

Garanti og support

Garanti: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Kundesupport: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.