WEIYINGSI CT04-CA

WEIYINGSI 36V 500W Motor Speed Controller Instruction Manual

Model: CT04-CA

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your WEIYINGSI 36V 500W Motor Speed Controller. This controller is designed for DC brushed motors in applications such as e-bikes, e-tricycles, and e-scooters. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Produkt overview

The WEIYINGSI 36V 500W Motor Speed Controller features a rugged aluminum housing with integrated cooling fins for durability and heat dissipation. It includes various quick connectors for straightforward installation.

WEIYINGSI 36V 500W Motor Speed Controller with dimensions: 3.27 inches (83mm) length, 2.56 inches (65mm) width, 1.50 inches (38mm) height.
This image displays the WEIYINGSI 36V 500W Motor Speed Controller, highlighting its compact dimensions of approximately 83mm in length, 65mm in width, and 38mm in height. The aluminum housing and various wire connectors are visible.
WEIYINGSI 36V 500W Motor Speed Controller with labeled connectors for motor, batteries, indicator light, charging port, switch lock, brake light, brake signal line, and speed control knob.
Dette billede giver en detaljeret view of the WEIYINGSI 36V 500W Motor Speed Controller, with each connector clearly labeled. Key connections include those for the motor, battery, indicator light, charging port, ignition switch, brake light, brake signal, and speed control (throttle).

Specifikationer

Arbejde bindtage36 volt
Matching MotorDC brushed motor (not for brushless motors)
Nominel motoreffekt500 watt
Under bindtage Beskyttelse31.5V ± 0.5V
Speed Governor1-4 V (Throttle)
ModelnavnCT04-CA
MærkeWEIYINGSI

Installationsvejledning

Professional installation is recommended. Ensure the power is disconnected before beginning installation. This controller is designed for DC brushed motors only.

Ledningsforbindelser

  1. Connect the two thicker wires from the controller (blue and yellow) to the motor. The blue wire connects to the motor's red wire, and the yellow wire connects to the motor's black wire.
  2. Connect the two thicker wires from the controller (red and black) to the battery. The red wire connects to the positive (+) terminal of the battery, and the black wire connects to the negative (-) terminal.
  3. Connect the throttle connector. The throttle typically has three wires; ensure the red wire connects to red and the black wire connects to black.
  4. Connect the ignition switch.
  5. After all connections are secure, turn on the ignition switch. The motor should now be ready for operation.

Important Note: Carefully verify all wire connections. Incorrect wiring, especially for the power cord, can cause damage to the controller.

This video provides a visual guide to connecting the WEIYINGSI 36V 500W Motor Speed Controller. It illustrates the proper connection points for the motor, battery, throttle, and ignition switch, emphasizing correct polarity and secure connections.
WEIYINGSI 36V 500W Motor Speed Controller showing organized wiring connections.
This image shows the WEIYINGSI 36V 500W Motor Speed Controller with its various wires and connectors, illustrating how they are organized for connection. The robust aluminum casing is also visible.

Operation

Once installed and powered, the controller provides steady and sensitive control of speed. Use the connected throttle (speed governor 1-4V) to regulate motor speed.

Opretholdelse

The controller's rugged aluminum housing with integrated cooling fins helps dissipate heat. Rubber grommets protect sensitive electronics from environmental elements. Regularly inspect all connections for tightness and signs of wear. Keep the controller clean and free from excessive dust or moisture.

Fejlfinding

  • If the motor does not run after installation, first check all power and signal connections for correct polarity and secure fit.
  • Ensure the battery is adequately charged and providing the correct voltage (36V).
  • Verify the ignition switch is in the "ON" position.
  • If issues persist, consult a professional for diagnosis. Avoid attempting repairs if you are not qualified, as this may void any warranty and cause further damage.

Hvad er der i æsken

  • 1 x WEIYINGSI 36V 500W Motor Speed Controller
  • 1 x Lock

Garanti og support

For questions regarding adaptation, installation, quality, or any other concerns about your 36V 500W Controller, please contact WEIYINGSI customer support. Refer to your purchase documentation for specific warranty details and contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.