BONTEC Portable Mobile Standing Laptop Desk MWS-001BK Instruction Manual

Indledning

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your BONTEC Portable Mobile Standing Laptop Desk, Model MWS-001BK. Please read this manual thoroughly before use to ensure proper function and safety.

Sikkerhedsoplysninger

• Sørg for, at alle komponenter er til stede og ubeskadigede før montering.
• Do not exceed the maximum weight capacity: Main desktop 44 lbs (20 kg), Secondary shelf 22 lbs (10 kg).
• Hold børn og kæledyr væk under montering.
• Spænd alle skruer godt fast, men overspænd dem ikke.
• Brug på en flad, stabil overflade.
• Lock casters when the desk is in a stationary position.

Pakkens indhold

Bekræft at alle dele er inkluderet i din pakke:

• Hovedskrivebord
• Secondary Shelf
• Vertikale støttesøjler (2)
• Base med hjul
• Assembly Hardware (screws, wrenches, etc.)

Hvis nogen dele mangler eller er beskadiget, bedes du kontakte kundesupport.

Opsætning og montering

Follow these steps to assemble your BONTEC Portable Mobile Standing Laptop Desk. It is recommended to have a clear, open space for assembly.

Step 1: Attach Casters to the Base

Secure the four smooth-rolling casters to the base of the desk. Ensure two of the casters are lockable and positioned for easy access.

Billedbeskrivelse: En fuld view of the assembled BONTEC portable mobile standing laptop desk, highlighting its casters at the base. The main desktop is tilted, holding a laptop, and the secondary shelf holds a cup and pen.

Step 2: Assemble Vertical Support Columns

Connect the vertical support columns to the base. Ensure they are securely fastened using the provided hardware.

Step 3: Attach Secondary Shelf

Mount the secondary shelf to the vertical support columns at your desired height. This shelf provides additional space for accessories.

Billedbeskrivelse: An illustration demonstrating the full dynamic motion of the desk, including the 0-40 degree tilt of the main desktop and the height adjustment mechanism of the entire desk.

Step 4: Install Main Desktop

Attach the main desktop to the top of the vertical support columns. This desktop features a tilt mechanism and an anti-slip stopper.

Billedbeskrivelse: Nærbillede views of the desk's features: a hand wiping a waterproof surface, non-slip pads on the desktop, and hand screws used for height adjustments.

Trin 5: Afsluttende kontrol

Once assembled, ensure all screws are tight and the desk is stable. Test the height adjustment and tilt mechanisms.

Betjeningsvejledning

Højdejustering

The desk's height can be adjusted from 40.5 to 49 inches (103 to 125 cm). To adjust the height, loosen the hand screws on the vertical support columns, raise or lower the desktop to the desired position, and then firmly tighten the hand screws to secure it.

Billedbeskrivelse: A split image showing a person comfortably using the BONTEC desk while sitting on a stool and then standing, demonstrating the desk's sit-stand functionality.

Desktop Tilt Adjustment

The main desktop can be tilted from 0 to 40 degrees. To adjust the tilt, loosen the knob located on the side of the desktop support, set the desktop to the desired angle, and then tighten the knob to lock it in place. The integrated anti-slip stopper will prevent items from sliding off.

Mobilitets- og låsehjul

The desk is equipped with four smooth-rolling casters for easy movement. To move the desk, unlock the casters. Once the desk is in the desired position, press down on the locking mechanism on two of the casters to secure the desk in place.

Billedbeskrivelse: A close-up illustration of the desk's casters, showing their 360-degree rotation capability and the locking mechanism for stability.

Using the Secondary Shelf

The secondary shelf provides additional storage for items such as cups, pens, or small documents. Ensure items placed on this shelf do not exceed its weight capacity of 22 lbs (10 kg).

Opretholdelse

• Rensning: Tør overflader af med en blød, damp cloth. Avoid abrasive cleaners. The desktop surface is scratch-resistant and waterproof for easy cleaning.
• Fastgørelsesmidler: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de forbliver stramme. Efterspænd efter behov for at opretholde stabiliteten.
• Hjul: Hold hjulene fri for snavs for at sikre jævn rulning.
• Opbevaring: Store the desk in a dry environment away from extreme temperatures.

Fejlfinding

Specifikationer

• Model: MWS-001BK
• Mærke: BONTEC
• Produktdimensioner: 24.41 x 15.75 x 49.21 tommer (62 x 40 x 125 cm)
• Varens vægt: 32.6 pund (14.8 kg)
• Main Desktop Capacity: 44 lbs (20 kg)
• Secondary Shelf Capacity: 22 lbs (10 kg)
• Højdejusteringsområde: 40.5 til 49 tommer (103 til 125 cm)
• Desktop Tilt Range: 0 til 40 grader
• Materiale: Alloy Steel, MDF
• Farve: Sort
• Hjul: 4 universal mute wheels, 2 lockable

Billedbeskrivelse: A diagram illustrating the key dimensions of the BONTEC desk, including height, width, depth, and the dimensions of both the main desktop and the secondary shelf, along with their respective weight capacities.

Garantioplysninger

BONTEC products are designed and manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official BONTEC webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

Kundesupport

If you have any questions, require assistance, or encounter issues with your BONTEC Portable Mobile Standing Laptop Desk, please contact BONTEC customer support:

• Webwebsted: Visit the BONTEC Store on Amazon (til generelle forespørgsler og produktinformation)
• Refer to your product packaging for direct contact information (email/phone).