Indledning
Thank you for choosing the Physio Logic Digital 10 Thermometer. This device is designed to provide fast, accurate, and reliable temperature readings for personal health monitoring. Please read this manual thoroughly before use to ensure proper operation and to maintain the accuracy and longevity of your thermometer.
Image: The Physio Logic Digital 10 Thermometer, a white, slender device with a digital display and the Physio Logic logo.
Produktegenskaber
- Provides clinically proven accuracy for temperature readings.
- Delivers results in less than ten seconds.
- Displays temperature in either Fahrenheit or Celsius.
- Accurate within 0.2 degrees F / 0.1 degrees C.
- Beeps when peak temperature has been reached.
- Conveniently water resistant for easy cleaning and hygiene.
- Includes auto shut-off for extended battery life.
- Comes with a handy storage case for safe keeping.
Image: The retail packaging for the Physio Logic Digital 10 Thermometer, highlighting its 10-second results and water-resistant features.
Opsætning
Installation af batteri
The Physio Logic Digital 10 Thermometer comes with one product-specific battery included and pre-installed. If the battery needs replacement, carefully open the battery compartment located at the end opposite the tip. Insert a new battery, ensuring correct polarity, and securely close the compartment.
Initial Power-On and Unit Selection
- Tryk på tænd/sluk-knappen for at tænde termometret. Der lyder et kort bip, og displayet viser kort alle segmenter efterfulgt af den sidst målte temperatur.
- To switch between Fahrenheit (°F) and Celsius (°C), ensure the thermometer is off. Press and hold the power button for approximately 3 seconds until the unit changes on the display. Release the button to set the desired unit.
- Termometeret er nu klar til brug.
Betjeningsvejledning
Tager en temperaturaflæsning
- Tryk på tænd/sluk-knappen for at tænde termometeret.
- Place the thermometer tip according to the desired measurement method:
- Oral anvendelse: Place the tip under the tongue, as close to the heat pocket as possible. Keep mouth closed.
- Axillær (underarm) brug: Place the tip in the armpit, ensuring good skin contact. Hold arm firmly against the body.
- Rektal brug: Påfør et vandopløseligt glidecreme på spidsen. Før forsigtigt spidsen ind i endetarmen, højst 1,25 cm.
- Hold the thermometer in place until the peak temperature is reached, indicated by a series of beeps (approximately 10 seconds).
- Aflæs temperaturen, der vises på skærmen.
- Press the power button to turn off the thermometer, or it will automatically shut off after approximately 10 minutes of inactivity to conserve battery life.
Opretholdelse
Rengøring og desinfektion
The thermometer is water resistant and can be easily cleaned. After each use, wipe the tip and shaft with a soft cloth dampened with isopropyl alcohol (70% concentration) or soap and water. Do not immerse the entire thermometer in water or any cleaning solution. Allow to air dry before storing.
Opbevaring
Store the thermometer in its handy storage case when not in use. Keep it in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the thermometer is clean and dry before storing.
Image: The Physio Logic Digital 10 Thermometer resting inside its protective clear plastic storage case.
Udskiftning af batteri
When the battery symbol appears on the display, it indicates that the battery is low and needs replacement. Refer to the 'Battery Installation' section under Setup for instructions.
Fejlfinding
-
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.