Kuzco Lighting AT6510-BN Slate Outdoor LED Wall Lighting

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Kuzco Lighting AT6510-BN Slate Outdoor LED Wall Lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This fixture is designed for outdoor use and features a durable aluminum and glass construction with an integrated LED light source.

Sikkerhedsoplysninger

ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til sikringsboksen eller afbryderen før installation eller service.

• Alle elektriske forbindelser skal være i overensstemmelse med lokale og National Electrical Code (NEC) standarder.
• Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
• Sørg for, at armaturet er korrekt jordet.
• Installer ikke dette armatur på overflader, der ikke er strukturelt solide.
• Forsøg ikke at ændre armaturet. Enhver ændring kan ugyldiggøre garantien og skabe en sikkerhedsrisiko.
• This fixture is wet-rated, suitable for outdoor use.
• The integrated LED is not replaceable. Do not attempt to open the LED module.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes.

• LED Wall Sconce Fixture (Model AT6510-BN)
• Monteringssæt (skruer, trådmøtrikker, monteringsplade)
• Instruktionsmanual

Specifikationer

Image: Kuzco Lighting AT6510-BN Slate Outdoor LED Wall Lighting, showing its dimensions of 9.88 inches in length, 9.88 inches in width, and 5.5 inches in height.

Opsætning og installation

Nødvendige værktøjer (ikke inkluderet): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

1. Sluk for strømmen: Before starting any electrical work, ensure the power supply to the junction box is turned off at the circuit breaker or fuse box.
2. Forbered monteringsplade: Attach the mounting plate (included in hardware kit) to the junction box using the provided screws. Ensure the plate is securely fastened.
3. Foretag elektriske forbindelser:
   • Connect the fixture's sort wire to the supply circuit's sort (Live) wire.
   • Connect the fixture's hvid wire to the supply circuit's hvid (Neutral) wire.
   • Connect the fixture's jord wire (bare copper or green) to the supply circuit's jord wire and to the mounting plate's ground screw.
   • Fastgør alle forbindelser med trådmøtrikker og pak dem ind med elektrikertape for ekstra sikkerhed.
4. Monter armaturet: Carefully align the fixture with the mounting plate and secure it using the provided screws. Ensure no wires are pinched during this process.
5. Seal (Outdoor Installation): For outdoor installations, apply a bead of weather-resistant sealant around the perimeter of the fixture where it meets the mounting surface to prevent water intrusion.
6. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen.

Betjeningsvejledning

The Kuzco Lighting AT6510-BN fixture operates as a standard wall light once properly installed and powered.

• Tænd/sluk: Brug vægkontakten, der er tilsluttet armaturets kredsløb, til at tænde eller slukke lyset.
• Dæmpningsfunktion: This fixture is compatible with TRIAC/ELV type dimmers. If a compatible dimmer switch is installed, you can adjust the light output by operating the dimmer control. Ensure your dimmer switch is rated for LED lighting.

Opretholdelse

The AT6510-BN LED wall light requires minimal maintenance.

• Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Brug en blød, tør klud.amp cloth with a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads, as these can damage the finish or glass.
• LED levetid: The integrated LED has a long lifespan of approximately 50,000 hours. No bulb replacement is necessary.
• Inspektion: Periodically inspect the fixture for any signs of damage, loose connections, or wear, especially after severe weather conditions.

Fejlfinding

If troubleshooting steps do not resolve the issue, contact Kuzco Lighting customer support.

Garanti og support

This Kuzco Lighting fixture is covered by a 2 års producentgaranti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

Garantien dækker ikke:

• Skader forårsaget af forkert installation eller vedligeholdelse.
• Damage caused by misuse, abuse, accidents, or neglect.
• Skader fra uautoriserede reparationer eller ændringer.
• Almindelig slitage.

For warranty claims or technical support, please contact Kuzco Lighting customer service. Keep your proof of purchase for warranty validation.

Kontaktoplysninger: Please refer to the Kuzco Lighting official webwebstedet eller din købsdokumentation for at få de seneste kontaktoplysninger.