Indledning
Tak for købetasing the Victrola Gramophone Symphony Bluetooth Speaker. This speaker combines classic design with modern Bluetooth technology, allowing for wireless audio streaming. This manual provides essential information for the safe and efficient use of your speaker, including setup, operation, maintenance, and troubleshooting.
Vigtige sikkerhedsoplysninger
- Læs alle instruktioner, før du betjener enheden.
- Gem denne vejledning til fremtidig reference.
- Udsæt ikke enheden for vand, fugt eller ekstreme temperaturer.
- Bloker ikke nogen ventilationsåbninger.
- Brug kun tilbehør/tilbehør specificeret af producenten.
- Tag stikket ud af enheden under tordenvejr, eller når den ikke skal bruges i længere perioder.
- Overlad al service til kvalificeret servicepersonale.
Pakkens indhold
Sørg venligst for, at alle nedenstående varer er til stede i din pakke:
- Victrola Gramophone Symphony Bluetooth Speaker (VSG-140)
- AC strømadapter
- Instruktionsmanual
Produkt overview
Familiarize yourself with the components of your Victrola Gramophone Symphony Bluetooth Speaker.
Figur 1: Front view of the Victrola Gramophone Symphony Bluetooth Speaker, showcasing its unique gramophone-inspired design with an oak finish.
Figur 2: Side view of the speaker, highlighting the horn shape and the contrast between the oak wood and black speaker components.
Figur 3: Bag view of the speaker, typically where the power input and any physical control buttons (if present) are located.
Note: Specific button locations and port labels may vary slightly. Refer to the physical unit for exact details.
Opsætning
- Pak højttaleren ud: Tag forsigtigt højttaleren og alt tilbehør ud af emballagen.
- Placering: Placer højttaleren på en stabil, plan overflade. Sørg for tilstrækkelig ventilation omkring enheden.
- Tilslut strøm: Insert the AC power adapter into the DC IN port on the speaker (refer to Figure 3 for typical location). Plug the other end of the adapter into a standard AC wall outlet.
- Startgebyr (hvis relevant): If your speaker has a built-in rechargeable battery, allow it to charge fully before first use. A full charge typically takes approximately 8 hours and provides up to 12 hours of playback.
Betjeningsvejledning
Tænd/sluk
- For at tænde: Press and hold the Power button (usually located on the back or base) for a few seconds until an indicator light illuminates or an audible tone is heard.
- For at slukke: Press and hold the Power button again for a few seconds. The indicator light will turn off.
Bluetooth-parring
To connect your speaker to a Bluetooth-enabled device (e.g., smartphone, tablet, laptop):
- Aktivér Bluetooth-tilstand: Ensure the speaker is powered on and in Bluetooth pairing mode. An indicator light (often blue) will typically flash rapidly, indicating it is discoverable.
- Aktivér Bluetooth på din enhed: Go to the Bluetooth settings on your smartphone, tablet, or other compatible device.
- Vælg højttaleren: In the list of available devices, look for "Victrola Gramophone Symphony" or a similar name. Select it to initiate pairing.
- Bekræft forbindelse: Once paired, the speaker's Bluetooth indicator light will usually become solid, and an audible confirmation tone may sound. You can now play audio from your device through the speaker.
Note: The Bluetooth range is approximately 33 feet (10 meters). Obstacles may reduce this range.
Opretholdelse
- Rensning: Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
- Opbevaring: Når højttaleren ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
- Batteripleje: If the speaker has a rechargeable battery, avoid fully discharging it frequently to prolong battery life. Charge it periodically even when not in use.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Power adapter not connected or faulty outlet. Battery discharged. | Ensure the AC power adapter is securely connected to both the speaker and a working wall outlet. Charge the battery if operating wirelessly. |
| Kan ikke parres via Bluetooth | Speaker not in pairing mode. Bluetooth disabled on device. Device too far. | Ensure the speaker is in Bluetooth pairing mode (flashing indicator). Enable Bluetooth on your device. Move the device closer to the speaker (within 33 feet). |
| Ingen lyd | Volume too low. Incorrect input source. Device not connected. | Increase the volume on both the speaker and your connected device. Ensure Bluetooth is successfully paired. |
| Lydforvrængning | Volume too high. Weak Bluetooth signal. | Reduce the volume on both the speaker and your device. Move your device closer to the speaker to improve signal strength. |
Specifikationer
- Model: VSG-140
- Mærke: Victrola
- Fabrikant: Innovativ teknologi
- Strømkilde: AC
- Højttalerudgangseffekt: 25 watt
- Forbindelse: Bluetooth
- Bluetooth Range: Op til 33 fod (10 meter)
- Lydudgangstilstand: Omgive
- Højttalertype: Surround Sound
- Indkapslingsmateriale: Plast
- Produktdimensioner: 60.96 x 40.64 x 40.64 cm (24 x 16 x 16 tommer)
- Varens vægt: 2.27 kg (5 lbs)
- Batteri: 1 lithium-ion batteri (medfølger)
- Gennemsnitlig batterilevetid: 12 timer
- Batteriopladningstid: 8 timer
- Kompatible enheder: Smartphone, Tablet, MP3 Player, Desktop, Laptop, Television, Projector
- Vandtæt: Ingen
Garanti og support
This Victrola Gramophone Symphony Bluetooth Speaker (Model VSG-140) comes with a limited manufacturer's warranty. Specific details regarding the warranty period and coverage are typically provided with your purchase documentation or can be obtained by contacting the manufacturer directly.
For technical support, warranty claims, or further assistance, please contact Innovative Technology, the manufacturer of Victrola products. Contact information can usually be found on the product packaging or their official webwebsted.
Fabrikant: Innovativ teknologi
Forretningssted: TORONTO, ON, M3B 2V9 CA