Telwin 807591 Touring 11 Battery Charger 6/12V User Manual

1. Introduktion

The Telwin Touring 11 is an advanced battery charger designed for various types of accumulators, including WET, GEL, Pb-Ca, AGM, MF, and EFB, operating at both 6V and 12V. It features electronic control of charging phases, automatic interruption, and resumption (TRONIC system) to ensure optimal and safe charging. The unit provides clear LED indicators for battery charge status and incorporates multiple safety protections.

2. Sikkerhedsoplysninger

Læs og forstå alle sikkerhedsinstruktioner, før du bruger batteriopladeren. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.

• Brug altid opladeren i et godt ventileret område.
• Udsæt ikke opladeren for regn eller overdreven fugt.
• Sørg for, at opladeren er afbrudt fra strømnettet, før du foretager eller afbryder forbindelser til batteriet.
• Undgå at oplade frosne batterier.
• Wear appropriate eye protection and clothing when working with batteries.
• Opbevares utilgængeligt for børn.
• Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Telwin Touring 11 Battery Charger unit
• Strømkabel
• Battery connection clamps (rød og sort)
• Brugervejledning (dette dokument)

4. Produktfunktioner

The Telwin Touring 11 Battery Charger offers the following key features:

• TRONIC System: Electronic control of charging phases with automatic interruption and resumption.
• Alsidig opladning: Suitable for WET, GEL, Pb-Ca, AGM, MF, EFB battery types.
• Dual Voltage: Charges 6V and 12V batteries.
• LED-indikatorer: Clear display of battery charge status (MIN, 25%, 50%, 75%, MAX).
• Sikkerhedsbeskyttelse: Built-in protection against overloads, polarity inversions, and automatic battery voltage anerkendelse.
• Kompakt design: Lightweight and compact for easy handling and storage.
• Integreret opbevaring: Practical rear compartment for cables and clamps.

Figure 4.1: Telwin Touring 11 Battery Charger with its included red and black battery clamps.

5. Opsætning

1. Pak opladeren ud: Carefully remove the battery charger and all accessories from the packaging.
2. Undersøg for skader: Check the charger and cables for any signs of damage. Do not use if damaged.
3. Ventilation: Place the charger in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
4. Batteriforberedelse: Ensure the battery to be charged is clean and free of corrosion on its terminals. If it's a WET battery, check the electrolyte levels and top up with distilled water if necessary, ensuring proper ventilation during charging.

Figur 5.1: Øverst view of the Telwin Touring 11 Battery Charger, highlighting the control panel and fuse location.

6. Betjeningsvejledning

1. Tilslut til batteri:
   • Tilslut rød (+) clamp til batteriets positive pol.
   • Tilslut sort (-) clamp til den negative terminal på batteriet.
   • Sørg for, at forbindelserne er sikre og fri for korrosion.
2. Vælg Voltage: Brug voltage selection switch on the charger's front panel to choose between 6V or 12V, matching the voltage of the battery you are charging.
3. Tilslutning til elnettet: Plug the charger's power cable into a 230V AC mains outlet.
4. Opladningsproces:
   • The charger will automatically detect the battery and begin the charging process (TRONIC system).
   • The LED indicators (MIN, 25%, 50%, 75%, MAX) will illuminate sequentially to show the current charge status of the battery.
   • Once the battery is fully charged, the "MAX" LED will remain steadily lit, and the charger will automatically switch to maintenance mode or stop charging to prevent overcharging.
5. Afbryder forbindelsen:
   • First, disconnect the charger from the mains power outlet.
   • Frakobl derefter sort (-) clamp fra batteriets negative pol.
   • Til sidst skal du afbryde rød (+) clamp fra batteriets positive pol.

Figure 6.1: Close-up of the 6V/12V voltage selector switch on the Telwin Touring 11 charger.

7. Vedligeholdelse

• Rensning: Disconnect the charger from power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use solvents or abrasive cleaners.
• Kabel og Clamp Inspektion: Kontrollér regelmæssigt strømkablet og batteriklemmen.ampUndersøg for tegn på skader, flosning eller korrosion. Udskift beskadigede komponenter med det samme.
• Opbevaring: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Utilize the rear compartment for cable and clamp opbevaring.
• Udskiftning af sikring: The charger is equipped with a 5A mains fuse. If the charger fails to power on, check and replace the fuse if necessary. Ensure to use a fuse of the correct rating (5A).

8. Fejlfinding

9. Specifikationer

10. Garantioplysninger

Specific warranty details for the Telwin Touring 11 Battery Charger may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for detailed information regarding warranty coverage, terms, and conditions. Keep your proof of purchase for warranty claims.

11. Support

For technical assistance, spare parts, or further inquiries, please contact Telwin customer support or visit the official Telwin website. Contact information can typically be found on the product packaging or on the manufacturer's webwebsted.

Telwin Official Webwebsted: www.telwin.com