MakerFocus 8541549166
MakerFocus TP4056 Charging Module User Manual
Model: 8541549166
Indledning
The MakerFocus TP4056 Charging Module is a compact and efficient solution designed for charging 18650 lithium batteries. It features a Micro USB input, allowing for convenient charging using standard mobile phone chargers. This module also includes essential battery protection features, ensuring safe and reliable operation for various DIY projects.
Nøglefunktioner omfatter:
- Micro USB input for direct charging with phone chargers.
- Integrated battery protection against over-discharge and overcurrent.
- Convenient input voltage wiring pads for flexible DIY integration.
- Visual charging status indicator (red for charging, green for full).
Image: A pack of ten MakerFocus TP4056 Charging Modules, showcasing their compact size and Micro USB port.
Opsætning
Setting up the TP4056 charging module involves connecting the power input, the lithium battery, and any desired load. Follow these steps carefully to ensure correct and safe operation.
- Strømindgang: The module can be powered via its Micro USB female port or through the dedicated input voltage wiring pads. Connect a 5V power source to either the Micro USB port or the '+' and '-' pads. Ensure the power source can output 1A or more for optimal charging.
- Batteriforbindelse: Connect the positive terminal of your lithium battery to the 'B+' pad on the module and the negative terminal to the 'B-' pad.
- Belastningsforbindelse (valgfrit): If you intend to power a load directly from the module while charging, connect the positive terminal of your load to the 'OUT+' pad and the negative terminal to the 'OUT-' pad.
Billede: En detaljeret view of the TP4056 module, highlighting the Micro USB input, B+/B- battery terminals, and OUT+/OUT- load terminals.
Vigtig bemærkning: When connecting the battery for the first time, there might be no voltage output between OUT+ and OUT-. This is normal as the protection circuit needs activation. To activate it, connect a 5V voltage source to charge the module. If the battery was short-circuited or connected incorrectly (B+ and B- reversed), it will also require recharging to activate the protection circuit.
Betjeningsvejledning
Once the module is correctly set up, operating it for battery charging is straightforward.
- Initierende opkrævning: With the battery connected to B+ and B-, insert a mobile phone charger (or other 5V, 1A+ power source) into the Micro USB socket.
- Opladningsindikator: A red LED light on the module will illuminate, indicating that the battery is currently charging.
- Opkrævning: Once the battery is fully charged, the red LED will turn off, and a green LED light will illuminate, signaling that charging is complete.
Image: The TP4056 module integrated into a simple circuit, demonstrating its connection to a lithium battery and a small light bulb as a load.
Opretholdelse
To ensure the longevity and proper functioning of your TP4056 charging module, consider the following maintenance guidelines:
- Korrekt afbrydelse: Always disconnect the load from the OUT terminals before connecting or disconnecting the battery or power input. Incorrect polarity or connection order can damage the module.
- Renhed: Hold modulet fri for støv, snavs og fugt. Brug en blød, tør klud til rengøring, hvis det er nødvendigt.
- Opbevaring: Store the module in a dry, cool environment when not in use. Avoid extreme temperatures or direct sunlight.
- Håndtering: Handle the module with care to avoid physical damage to the components or solder joints.
Fejlfinding
If you encounter issues with your TP4056 charging module, refer to the following common problems and their solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen bindtage output from OUT+ and OUT- after first battery connection. | Protection circuit is inactive. | Connect a 5V power source to the module's input to initiate charging. This will activate the protection circuit. If the battery was short-circuited or connected incorrectly, it also needs recharging to activate. |
| Batteriet oplades ikke eller oplades langsomt. | Input power source is insufficient (less than 1A). | Ensure your mobile phone charger or power supply can output 1A or more. Lower current sources may not charge the battery effectively. |
| Module appears damaged or not functioning. | Incorrect wiring, especially reversed polarity on OUT terminals. | Verify all connections, especially the positive and negative terminals of the load (OUT+ and OUT-). Incorrect wiring can cause permanent damage. |
Specifikationer
Detailed technical specifications for the MakerFocus TP4056 Charging Module:
- Input bindtage: 5V
- Opladning Cut-off Voltage: 4.2 V ± 1%
- Maksimal opladningsstrøm: 1000mA (1A)
- Battery Over-discharge Protection Voltage: 2.5V
- Battery Overcurrent Protection Current: 3A
- Bordets dimensioner: 2.6 cm x 1.7 cm (ca. 1.02 tommer x 0.67 tommer)
- Varens vægt: 0.32 ounces (per module)
Image: The TP4056 module shown with its physical dimensions, indicating a length of 2.6cm (1.02 inches) and a width of 1.7cm (0.67 inches).
Image: A single TP4056 module placed on a digital kitchen scale, displaying its light weight.
Garanti og support
Information regarding product warranty and dedicated customer support channels is not provided within this manual. For any inquiries or support needs, please refer to the product listing page on the retailer's website or contact the manufacturer, MakerFocus, directly through their official channels if available.
You may find additional information or contact details on the produktets Amazon-side.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.