MANHATTAN Universal Flat-Panel TV Articulating Wall Mount (Model 461399)

1. Introduktion

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your MANHATTAN Universal Flat-Panel TV Articulating Wall Mount, Model 461399. This single-arm mount is designed to securely hold flat-panel televisions ranging from 13 to 42 inches and weighing up to 20 kg (44 lbs). It offers adjustable tilt, swivel, and level functionalities to optimize your viewoplevelse.

Billede 1.1: Vinklet view of the MANHATTAN Universal Flat-Panel TV Articulating Wall Mount.

2. Sikkerhedsoplysninger

ADVARSEL: Read all instructions carefully before installation. Improper installation can result in property damage, serious injury, or death. If you do not understand these instructions or have doubts about the safety of the installation, contact a qualified installer.

• Sørg for, at monteringsfladen sikkert kan bære den samlede vægt af beslaget og fjernsynet.
• Overskrid ikke den maksimale vægtkapacitet på 20 kg (44 lbs).
• Dette produkt er kun beregnet til indendørs brug.
• Brug kun det medfølgende monteringsudstyr. Kontakt kundesupport, hvis der mangler eller er beskadigede dele.
• Always use a stud finder to locate wall studs for secure mounting in wood stud walls.
• Wear appropriate safety gear during installation, including eye protection.

3. Pakkens indhold

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, do not proceed with installation and contact customer support.

• Wall Mount Assembly (Single Arm)
• TV Mounting Brackets (VESA Plate)
• Hardware Kit (Screws, Washers, Spacers, Wall Anchors)
• Instruktionsmanual

Image 3.1: Packaging of the MANHATTAN Universal Flat-Panel TV Articulating Wall Mount.

4. Opsætning og installation

4.1 Kontrol før installation

• TV-kompatibilitet: Ensure your TV's weight is within 20 kg (44 lbs) and its screen size is between 13 and 42 inches. Check the VESA mounting pattern on your TV (typically 75x75mm, 100x100mm, 200x100mm, or 200x200mm).
• Vægtype: Determine your wall type (wood stud, concrete, brick). Different wall types require specific mounting hardware and techniques.
• Nødvendige værktøjer: Pencil, drill, stud finder (for wood walls), level, Phillips head screwdriver, socket wrench.

4.2 Montering af TV-beslag på TV

1. Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at forhindre, at skærmen beskadiges.
2. Identificer VESA-monteringshullerne på bagsiden af ​​dit tv.
3. Vælg de passende skruer, skiver og afstandsstykker fra hardwaresættet, der passer til dit tv's monteringshuller.
4. Attach the TV mounting brackets to the back of your TV using the selected hardware. Ensure they are securely fastened but do not overtighten.

Billede 4.2.1: Bagside view of the VESA plate, showing mounting holes for TV attachment.

Billede 4.2.2: Forside view of the VESA plate, showing mounting holes for TV attachment.

4.3 Montering af vægpladen

1. Determine the desired height and position for your TV. Use a pencil to mark the top center of where the mount will be.
2. Place the wall plate against the wall at the marked position and use a level to ensure it is perfectly horizontal. Mark the drill holes.
3. Til træstolpevægge: Use a stud finder to locate the center of a wood stud. Drill pilot holes (recommended size in manual, typically 5mm) into the stud. Secure the wall plate using the lag bolts and washers.
4. Til beton-/murstensvægge: Drill pilot holes (recommended size in manual, typically 10mm) into the solid concrete or brick. Insert wall anchors into the holes. Secure the wall plate using the lag bolts and washers.
5. Sørg for, at vægpladen er fast og sikkert fastgjort til væggen.

Billede 4.3.1: Side view of the mount, illustrating its extension from the wall.

4.4 Ophængning af tv'et

1. Løft forsigtigt tv'et op med de medfølgende beslag, og hægt dem fast på vægpladen.
2. Sørg for, at tv'et er sikkert monteret på vægpladen.
3. Tighten any safety screws or locking mechanisms to prevent accidental dislodgement.

5. Betjeningsvejledning (Justeringer)

This articulating wall mount allows for flexible positioning of your TV to achieve optimal viewing vinkler.

• Justering af hældning: Loosen the tilt knobs on the VESA plate, adjust the TV to the desired vertical angle (+5° to -12°), and then retighten the knobs.
• Drejejustering: Gently push or pull the TV to swivel it horizontally (up to 180° depending on TV size and wall distance).
• Niveaujustering: If your TV is slightly unlevel after installation, there may be a mechanism to adjust the horizontal level (typically +/-3°). Consult the specific diagram for your model.

Image 5.1: Technical diagram showing dimensions and available adjustment angles (tilt, swivel, level).

5.1 Kabelstyring

Utilize the integrated cable clips on the arm to route and organize your TV cables, ensuring a neat appearance and preventing damage.

Image 5.1.1: Detail of the mount arm showing cable management clips.

6. Vedligeholdelse

• Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme og sikre.
• Rengør holderen med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• If the mount becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official MANHATTAN webwebsted. Gem din købsbevis til garantikrav.

Fabrikant: MANHATTAN

Dato først tilgængelig: 9. juni 2017