Tamiya Spray Lacquer TS-47 Chrome Yellow Instruction Manual

1. Produktet er slutview

The Tamiya Spray Lacquer TS-47 Chrome Yellow is a high-quality aerosol paint designed for model building and various hobby applications. It provides a vibrant chrome yellow color with a gloss finish, offering fast-drying properties for efficient work. This product is suitable for indoor use on various surfaces.

Billede 1.1: Forside view of the Tamiya Spray Lacquer TS-47 Chrome Yellow can. The label clearly displays 'TAMIYA COLOR FOR PLASTICS' and 'FOR ADULT MODELERS ONLY'.

2. Sikkerhedsoplysninger

WARNING: Flammable liquid and vapor. Harmful if swallowed or inhaled. May cause eye and skin irritation.

• Bruges i et godt ventileret område. Undgå at indånde dampe.
• Holdes væk fra varme, varme overflader, gnister, åben ild og andre antændelseskilder. Ingen rygning.
• Wear protective gloves, eye protection, and respiratory protection if ventilation is inadequate.
• Hold beholderen tæt lukket, når den ikke er i brug.
• Keep out of reach of children. This product is intended for adult use only.
• In case of contact with eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• In case of skin contact, wash with plenty of soap and water.

3. Opsætning og klargøring

1. Forberedelse af overfladen: Ensure the surface to be painted is clean, dry, and free of dust, grease, or other contaminants. For best results, lightly sand smooth surfaces to provide adhesion.
2. Ventilation: Work in a well-ventilated area, preferably outdoors or in a spray booth with adequate exhaust.
3. Rystedåse: Before use, shake the can vigorously for at least one minute after the mixing ball begins to rattle. Continue shaking periodically during application.
4. Testspray: Always perform a test spray on a scrap piece of material to check color and spray pattern before applying to your main project.

4. Drift (applikation)

1. Afstand: Hold the can approximately 20-30 cm (8-12 inches) from the surface.
2. Anvendelsesteknik: Apply paint in thin, even coats using a steady, sweeping motion. Avoid applying a thick single coat, as this can lead to runs or an uneven finish.
3. Flere lag: For optimal coverage and finish, apply several thin coats rather than one heavy coat. Allow each coat to dry to the touch before applying the next.
4. Tørretid mellem lag: A typical dry time between coats is approximately 10-15 minutes, depending on humidity and temperature.

Billede 4.1: Side view of the Tamiya Spray Lacquer TS-47 Chrome Yellow can, showing the full can with its cap, indicating it's ready for use.

5. Tørring og hærdning

The Tamiya Spray Lacquer TS-47 Chrome Yellow is fast-drying. The approximate dry time to touch is 0.5 hours (30 minutes). Full cure time may vary depending on coat thickness, temperature, and humidity. For best results, allow painted items to cure for at least 24 hours before handling extensively or applying additional layers like clear coats.

6. Vedligeholdelse og opbevaring

• Rengøringsmundstykke: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This clears the nozzle and prevents clogging.
• Opbevaring: Store the can in a cool, dry place, away from direct sunlight and sources of ignition. Do not store at temperatures above 49°C (120°F).
• Bortskaffelse: Bortskaf tomme dåser i henhold til lokale bestemmelser. Må ikke punkteres eller brændes.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For information regarding product warranty, returns, or technical support, please refer to the official Tamiya America, Inc. webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.

Official Tamiya America, Inc. Webwebsted: www.tamiyausa.com