Kohler 76331-CP Shower Arm with 2-Way Diverter Instruction Manual

1. Produktet er slutview

The Kohler 76331-CP Shower Arm with 2-Way Diverter is a wall-mount fixture designed to direct water flow between a showerhead and a handshower. Constructed from brass, this unit features a polished chrome finish, engineered to resist corrosion and tarnishing. It includes a flange for installation and is compatible with standard 1/2-inch NPT connections.

Image 1.1: The Kohler 76331-CP Shower Arm with 2-Way Diverter, showcasing its polished chrome finish and integrated diverter mechanism.

2. Sikkerhedsoplysninger

• Sluk altid for hovedvandforsyningen, inden du påbegynder installation eller vedligeholdelse.
• Bær passende personlige værnemidler, såsom sikkerhedsbriller og handsker.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret VVS-installatør.
• Sørg for, at alle forbindelser er sikre for at forhindre lækager.
• Do not overtighten connections, as this can damage the product or plumbing.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes.

• Shower Arm with 2-Way Diverter
• Flange

Note: Showerheads, handshowers, and additional flanges (K-76334 Traditional flange, K-76335 Square flange) are sold separately.

4. Specifikationer

5. Installationsvejledning

5.1 Nødvendigt værktøj og materialer (medfølger ikke)

• Justerbar skruenøgle
• VVS-tape (gevindforsegling)
• Blød klud

5.2 Installationstrin

1. Sluk for vandforsyningen: Locate and turn off the main water supply to your shower area. Open existing shower faucets to relieve pressure.
2. Remove Existing Shower Arm (if applicable): Unscrew the existing shower arm from the wall fitting. Clean any old sealant or debris from the wall pipe threads.
3. Prepare New Shower Arm: Apply plumber's tape clockwise around the threaded end of the new Kohler shower arm (the end that connects to the wall). Ensure several wraps for a watertight seal.
4. Install Flange: Slide the decorative flange over the shower arm, ensuring it faces the wall.
5. Attach Shower Arm to Wall: Carefully thread the shower arm into the 1/2-inch NPT wall fitting. Hand-tighten first, then use an adjustable wrench to tighten an additional 1/2 to 1 full turn until secure and properly oriented. Do not overtighten.
6. Position Flange: Slide the flange flush against the wall to cover the opening.
7. Install Showerhead and Handshower: Attach your desired showerhead to the top outlet and your handshower hose to the bottom outlet of the diverter. Apply plumber's tape to these connections as well.
8. Test for lækager: Slowly turn the main water supply back on. Check all connections for leaks. If leaks occur, turn off water, tighten connections slightly, and re-test.

6. Betjeningsvejledning

The 2-way diverter allows you to easily switch water flow between your main showerhead and a connected handshower.

• To use the Showerhead: Ensure the diverter handle is in the position that directs water upwards to the showerhead.
• To use the Handshower: Rotate the diverter handle to the position that directs water downwards to the handshower.
• To turn off water: Use your shower's main faucet handle to stop the water flow. The diverter only controls the direction of water, not the on/off function or temperature.

7. Vedligeholdelse og pleje

• Rensning: Rengør den polerede kromfinish med en blød,amp klud. Undgå slibende rengøringsmidler, stærke kemikalier eller skuresvampe, da disse kan beskadige overfladen.
• Rengøring af pletter: For water spots, use a mild soap solution and rinse thoroughly with clean water, then dry with a soft cloth.
• Regelmæssig inspektion: Periodically check connections for any signs of leaks or corrosion.

8. Fejlfinding

9. Garanti og support

For specific warranty information and customer support, please refer to the official Kohler website or contact Kohler directly. Keep your purchase receipt for warranty claims.

Kohler Officiel Webwebsted: www.kohler.com