SELVE iveo Multi Send 10-Channel Radio Hand Transmitter User Manual

1. Introduktion

The SELVE iveo Multi Send is a versatile 10-channel radio hand transmitter designed for convenient control of SELVE radio motors. It features an integrated timer, Astro function, holiday function, intermediate position control, and automatic summer/winter time adjustment. Its large, clear display and intuitive programming make it easy to operate and configure your automated shading systems.

2. Sikkerhedsoplysninger

• Læs denne manual grundigt før installation og drift.
• Hold enheden væk fra fugt og ekstreme temperaturer.
• Operate the device only in dry indoor environments.
• Forsøg ikke at åbne eller reparere enheden selv. Kontakt kvalificeret personale for service.
• Important: This device is designed to function exclusively with SELVE SE Pro-RC and SEL Plus R(C) radio motors. It is not compatible with other radio motor systems.

3. Pakkens indhold

• 1 x SELVE iveo Multi Send 10-Channel Radio Hand Transmitter
• 2 x AAA batterier
• 1 x Vægmontering
• 1 x EVEROXX® Phase Tester (VDE/GS certified)

Image: The SELVE iveo Multi Send 10-Channel Radio Hand Transmitter, showing its display and control buttons.

Image: The included EVEROXX® Phase Tester, a VDE/GS certified electrical testing tool.

4. Produktet er slutview

The iveo Multi Send features a clear LCD display and a user-friendly button layout for easy navigation and control.

• Vise: Shows current time, channel, and operating mode (AUTO/MANUAL).
• MENU knap: Accesses programming and settings menus.
• AUTO knap: Toggles between automatic (timer-controlled) and manual operation.
• OK knap: Bekræfter valg og indstillinger.
• Direction Buttons (Up/Down/Left/Right): Used for navigation, manual motor control, and channel selection.

5. Opsætning

5.1 Batteriinstallation

1. Open the battery compartment cover on the back of the hand transmitter.
2. Isæt de to AAA-batterier, og sørg for at polerne vender korrekt (+/-).
3. Luk batterirummets dæksel forsvarligt.

5.2 Vægmontering

1. Select a suitable location for the wall mount, ensuring it is within reach and provides good signal transmission.
2. Secure the wall mount to the wall using appropriate screws (not included).
3. Slide the hand transmitter onto the wall mount until it clicks into place.

5.3 Initial Pairing with Motors

To control your SELVE radio motors, the hand transmitter must be paired with them. Multiple motors can be assigned to a single channel.

1. Ensure your SELVE radio motor is in pairing mode (refer to your motor's specific manual for instructions).
2. On the iveo Multi Send, select the desired channel for the motor.
3. Follow the on-screen prompts or specific button sequences (usually involving the MENU and OK buttons) to initiate the pairing process.
4. Once paired, you can set the upper and lower end positions for the motor using the hand transmitter.

6. Betjeningsvejledning

6.1 Kanalvalg

Brug Venstre og Højre arrow buttons to navigate between the 10 available channels. The selected channel number will be displayed on the screen.

6.2 Manuel kontrol

• Tryk på Up arrow to move the motor upwards.
• Tryk på Ned arrow to move the motor downwards.
• Tryk på OK button to stop the motor at any desired position.

6.3 Programming End Positions

After pairing, you can precisely set the upper and lower limits for your motors. This process typically involves moving the motor to the desired position and then confirming it via the MENU or OK button. Refer to the on-screen instructions for detailed steps.

6.4 Timerfunktioner

The iveo Multi Send offers various automated timer functions:

• Astro Function: Automatically closes your roller shutters at sunset. The opening time can be set manually.
• Individual Program: Allows you to program specific opening and closing times for each channel according to your daily schedule.
• Ferie funktion: Randomizes the set automatic operating times by up to 30 minutes to simulate occupancy, enhancing security when you are away.
• Intermediate Position / Ventilation/Tilt: Allows programming and recalling a specific intermediate position or a ventilation/tilt position for your shading system.

6.5 Automatic / Manual Mode Switching

Tryk på AUTO button to toggle between automatic (timer-controlled) and manual operation. When in automatic mode, the display will show 'AUTO'. Manual control is always possible regardless of the selected mode.

6.6 Automatic Summer/Winter Time Adjustment

The device automatically adjusts for daylight saving time changes (summer/winter time), ensuring your programmed schedules remain accurate without manual intervention.

7. Vedligeholdelse

7.1 Rengøring

Clean the surface of the hand transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the casing eller display.

7.2 Udskiftning af batteri

When the display becomes dim or the device no longer responds reliably, it is time to replace the batteries. Follow the battery installation steps (Section 5.1) to replace the two AAA batteries.

8. Fejlfinding

9. Tekniske specifikationer

10. Kompatibilitet

This SELVE iveo Multi Send hand transmitter is specifically designed and guaranteed to work only with SELVE SE Pro-RC og SEL Plus R(C) radio motors. It is not compatible with radio motors from other manufacturers or other SELVE motor series that do not support this radio protocol.

11. Oplysninger om bortskaffelse

Do not dispose of the device or batteries with household waste. Electronic devices and batteries must be collected separately and disposed of at designated recycling points in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.