VOX BC108 Black Cab Series Amplifier Skab

1. Introduktion

The VOX BC108 Black Cab Series Amplifier Cabinet is a compact and portable speaker cabinet designed to deliver quality sound for guitar amplification. Featuring an 8-inch speaker and 25 Watts of power handling, it is ideal for practice, studio use, and small venues. This manual provides essential information for the safe and effective use of your BC108 cabinet, ensuring optimal performance and longevity.

Figur 1: Forside view of the VOX BC108 Amplifier Cabinet.

2. Sikkerhedsforanstaltninger

To prevent electric shock, fire, or damage to the unit, please read and follow all instructions carefully.

• Strømkilde: This cabinet is passive and does not require direct power. Ensure any connected amplifier is properly grounded and uses the correct voltage.
• Ventilation: Do not block any ventilation openings. Ensure adequate airflow around the cabinet.
• Vand og fugt: Udsæt ikke enheden for regn, fugt eller for høj luftfugtighed. Placer ikke genstande fyldt med væsker på eller i nærheden af ​​enheden.
• Varme: Hold enheden væk fra varmekilder såsom radiatorer, varmeregistreringsapparater, komfurer eller andre apparater, der producerer varme.
• Rensning: Rengør kun med en tør klud. Brug ikke flydende rengøringsmidler eller aerosolrens.
• Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.
• Placering: Place the cabinet on a stable, level surface to prevent it from falling.
• Højttalerkabler: Use high-quality speaker cables with appropriate gauge for connections to prevent signal loss or damage.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• VOX BC108 Amplifier Skab
• Speaker Cable (may vary by region/retailer)
• Instruktionsmanual (dette dokument)

4. Opsætning

Follow these steps to set up your VOX BC108 amplifier cabinet:

1. Placering: Position the BC108 cabinet on a stable surface. For optimal sound projection, consider placing it on the floor or on a sturdy stand.
2. Tilslutning til en Amplifier Head:

   Locate the speaker output jack on your amplifier head and one of the input jacks on the rear of the BC108 cabinet. Use a high-quality speaker cable to connect these two points. Ensure both the amplifier and the cabinet are powered off before making connections.

   

   Figure 2: The BC108 cabinet paired with an MV50 amplifier hoved.

   

   Figure 3: Rear panel of the BC108, illustrating the parallel speaker jacks.

3. Impedanstilpasning: The BC108 has an impedance of 8 Ohms. Ensure your amplifier head's output impedance setting matches or is compatible with the cabinet's impedance to prevent damage to your amplivligere.
4. Parallel Speaker Jacks: The BC108 features two parallel speaker jacks. One jack serves as the input from your amplifier, and the other can be used to connect an additional speaker cabinet in parallel. When connecting two 8-Ohm cabinets in parallel, the total impedance presented to the amplifier will be 4 Ohms. Ensure your amplifier can safely operate at this lower impedance.

5. Betjening

The BC108 is a passive speaker cabinet and its operation is directly controlled by the connected amplifier hoved.

• Tænd/sluk: Tænd for din amplifier head after all connections are securely made. Turn off the amplifier head before disconnecting any cables.
• Lydstyrkekontrol: Adjust the volume and tone settings directly on your amplifier hoved.
• Daisy-Chaining (Connecting Multiple Cabinets): If you wish to connect a second 8-Ohm cabinet, use a speaker cable to connect the second parallel jack on the BC108 to the input of the additional cabinet. Remember that this configuration will result in a 4-Ohm load for your amplivligere.


Figure 4: Two BC108 cabinets stacked, demonstrating a potential multi-cabinet setup.

6. Vedligeholdelse

Proper maintenance ensures the longevity and performance of your BC108 cabinet.

• Rensning: Wipe the exterior of the cabinet with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish.
• Opbevaring: When not in use for extended periods, store the cabinet in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures.
• Inspektion: Periodically check speaker cables for any signs of wear or damage. Replace damaged cables immediately.

7. Fejlfinding

If you encounter issues with your BC108 cabinet, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact VOX customer support or a qualified service technician.

8. Specifikationer

9. Garantioplysninger

The VOX BC108 Amplifier Cabinet comes with a 1 års begrænset garanti from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, unauthorized repair, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VOX webwebsted.

10. Kundesupport

If you have any questions, require technical assistance, or need to arrange for service, please contact VOX customer support:

• Webwebsted: Visit the official VOX webwebsted med ofte stillede spørgsmål, supportressourcer og kontaktoplysninger.
• Kontakte: Refer to the contact section on the VOX webwebsted for telefonnumre eller e-mailsupport.
• forhandler: Contact your authorized VOX dealer for local support and service options.