Indledning
This manual provides essential information for setting up, operating, and maintaining your GoPro HERO5 Session 4K action camera. Please read it thoroughly before use to ensure optimal performance and safety. The GoPro HERO5 Session is a compact, waterproof action camera designed for capturing high-quality video and photos in various environments.
Hvad er der i æsken
Bekræft at alle varer er til stede i din pakke:
- GoPro HERO5 sessionskamera
- Batteri (indbygget)
- USB kabel
- Buet selvklæbende montering
- Tommelfingerskrue
- Brugervejledning (dette dokument)
Opsætning
1. Opladning af batteriet
Before first use, fully charge the camera's internal battery. Connect the supplied USB cable to the camera's USB-C port and to a USB power adapter (not included) or a computer.
The camera's status lights will indicate charging status. A full charge typically takes approximately 1.5 to 2 hours.
2. Indsættelse af et microSD-kort
The HERO5 Session requires a microSD card (sold separately) to store photos and videos. Use a Class 10 or UHS-I rated card for optimal performance.
- Åbn kameraets sidedør.
- Insert the microSD card into the slot with the label facing up, until it clicks into place.
- Luk sidedøren forsvarligt for at opretholde vandtætheden.
Image: Illustration of inserting a microSD card into the GoPro HERO5 Session. Ensure the card is oriented correctly before pushing it in.
3. Tænd/sluk
For at tænde skal du trykke på Mode knap (small button on the back). To power off, press and hold the Mode knap i to sekunder.
Betjening af kameraet
Grundlæggende kontrol
- Udløser/vælg-knap (Top): Press to start/stop recording or take a photo. Press to select menu options.
- Mode knap (Back): Press to cycle through modes (Video, Photo, Time Lapse). Press and hold to power on/off.
Ændring af tilstande
Når kameraet er tændt, skal du trykke på Mode knap repeatedly to cycle through the available capture modes: Video, Photo, and Time Lapse. The current mode will be displayed on the camera's small screen.
Optagelse af video
- Ensure the camera is in Video mode.
- Tryk på Lukker / vælg-knap once to start recording. A red LED will flash, and a beep will sound.
- Tryk på Lukker / vælg-knap again to stop recording. The red LED will stop flashing, and a beep will sound.
Tager billeder
- Ensure the camera is in Photo mode.
- Tryk på Lukker / vælg-knap once to take a photo. A beep will sound.
Tilslutning til GoPro-appen
For advanced controls, live preview, and media management, download the official GoPro Quik app on your smartphone or tablet. The HERO5 Session supports Bluetooth and Wi-Fi connectivity.
Image: Demonstrating the wireless connection between the GoPro HERO5 Session and a mobile device for app control.
Opretholdelse
Rengøring af kameraet
- Use a soft, lint-free cloth to clean the lens and screen.
- Til genstridigt snavs, let dampRengør kluden med vand. Brug ikke skrappe kemikalier.
- Ensure the USB-C port and microSD card slot are free of debris.
Vandtætning
The HERO5 Session is waterproof without a housing up to 33ft (10m). Always ensure the side door is completely closed and latched before exposing the camera to water.
Efter brug i saltvand skylles kameraet med ferskvand og tørres grundigt.
Fejlfinding
Kamera tænder ikke
- Ensure the battery is charged. Connect to a power source and check charging indicator.
- Perform a hard reset: Press and hold the Mode knap i 8-10 sekunder.
Recording Issues (Stuttering, Freezing)
- Verify you are using a recommended microSD card (Class 10 or UHS-I).
- Format the microSD card in the camera's settings.
- Sørg for, at kameraets firmware er opdateret.
Vandlækage
- Immediately power off the camera and remove the microSD card.
- Contact GoPro Support. Do not attempt to dry or use the camera.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | CHDHS-501 |
| Video opløsning | Op til 4K |
| Foto opløsning | 10 MP |
| Vandmodstand | Waterproof to 33ft (10m) without housing |
| Forbindelse | Wi-Fi, Bluetooth, USB-C, HDMI |
| Opbevaring | MicroSD (Class 10 or UHS-I required) |
| Billedstabilisering | Ja |
Garanti og support
Your GoPro HERO5 Session is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official GoPro website or contact GoPro customer support directly.
For technical assistance, troubleshooting, or to register your product, visit the official GoPro support page: gopro.com/help.
Vigtige sikkerhedsoplysninger
- Do not attempt to open or disassemble the camera.
- Undgå ekstreme temperaturer og direkte sollys i længere perioder.
- Opbevares utilgængeligt for børn.
- Dispose of the camera and battery responsibly according to local regulations.