Anderic RR682M Replacement Remote Control Instruction Manual for Onkyo AV Receivers

1.Overview

The Anderic RR682M is a replacement remote control designed for use with compatible Onkyo AV receivers. This remote offers pre-programmed functionality for immediate use with specified Onkyo models and can also be programmed to control various other devices, including cable boxes, satellite receivers, DVD players, and audio equipment.

It provides comprehensive control over your Onkyo receiver, including input selection and full menu navigation. Please note that this remote does not support switching between A/B speakers.

Front view of the Anderic RR682M remote control

Figur 1: Forside view of the Anderic RR682M remote control, displaying all buttons and their labels.

2. Opsætning

2.1 Batteriinstallation

Find batterirummet på bagsiden af fjernbetjeningen.
Skub batteridækslet nedad for at åbne det.
Insert two (2) AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
Sæt batteridækslet på igen ved at skubbe det opad, indtil det klikker på plads.

Tilbage view of the Anderic RR682M remote control showing the battery compartment

Figur 2: Tilbage view på fjernbetjeningen, så batterirummet fremhæves.

2.2 Initial Use with Onkyo Receivers

The Anderic RR682M remote control is pre-programmed for compatible Onkyo AV receiver models. For these models, no additional programming is required. Simply insert the batteries, and the remote is ready for use.

Ensure the remote is in the MODTAGER mode before attempting to control your Onkyo receiver. This is typically indicated by a dedicated button or mode selection.
Point the remote directly at your Onkyo receiver and press the desired function buttons.

Compatible Onkyo Remote Models: RC-682M, RC-605S, RC-606S, RC-607M, RC-608M, RC-650M, RC-651M, RC-668M, RC-681M, RC-728M, RC-461M, RC-683M, RC-620M, RC-646S, RC-647M, RC-649M.

3. Betjeningsvejledning

The RR682M remote provides full functionality for your Onkyo AV receiver. Below are common operations:

Tænd/sluk: Tryk på STANDBY/ON button to power the receiver on or off.
Valg af input: Brug INPUTVÆLGER buttons (e.g., VCR/DVR, CBL/SAT, GAME/TV, TAPE/AMP, CD, DVD, AUX, MULTICH, TUNER, DOCK, TV, VCR, CABLE, SAT) to switch between different audio/video sources connected to your receiver.
Lydstyrkekontrol: Brug VOL+ og VOL - buttons to adjust the master volume.
Stum: Tryk på MUTNING button to temporarily silence the audio. Press again to restore sound.
Menu navigation: Brug retningspilsknapperne (OP, NED, VENSTRE, HØJRE) og ENTER button to navigate through your receiver's on-screen menus.
Retur/udgang: De TILBAGE button typically exits a menu or goes back to the previous screen.
Lytningstilstand: Knapper som STEREOANLÆG, OMGIVE allow selection of audio listening modes.
Afspilningskontroller: Standard playback buttons (PLAY, PAUSE, STOP, FAST FORWARD, REWIND, SKIP) are available for compatible devices.

Vigtig bemærkning: The Anderic RR682M remote control does not support switching between A/B speakers on your Onkyo receiver.

4. Multi-Device Programming

The RR682M is a 6-device universal remote. In addition to controlling your Onkyo receiver, it can be programmed to operate up to five other devices such as TVs, DVD players, VCRs, cable boxes, and satellite receivers. Refer to the included instruction booklet for detailed programming codes and steps for each device type.

4.1 Programming Steps (General)

Identify the device you wish to program (e.g., TV, DVD, CD, VCR, SAT).
Press and hold the corresponding device button on the remote (e.g., TV) indtil indikatorlampen lyser.
Enter the 4-digit programming code for your device's brand from the provided code list.
If the code is accepted, the indicator light will turn off. Test the remote's functions with your device.
Hvis enheden ikke reagerer, kan du prøve den næste kode, der er angivet for dit mærke.

For a complete list of programming codes and advanced programming options, consult the physical instruction booklet that came with your remote.

5. Fejlfinding

Problem	Løsning
Remote does not operate the Onkyo receiver.	Sørg for, at nye AA-batterier er isat korrekt. Verify the remote is in MODTAGER mode. Point the remote directly at the receiver, ensuring no obstructions. Check if the receiver's remote sensor is clean and unobstructed.
Remote does not operate other devices after programming.	Sørg for, at den korrekte enhedstilstandsknap (f.eks. TV, DVD) er valgt. Re-enter the programming code, trying alternative codes for your device brand. Confirm the device is powered on and its remote sensor is clear.
Some functions do not work on the Onkyo receiver.	Confirm the function is supported by the RR682M (e.g., A/B speaker switching is not supported). Ensure the receiver's firmware is up to date if applicable (consult your receiver's manual).

6. Specifikationer

Feature	Detalje
Modelnummer	RR682M
Mærke	Anderic
Produktdimensioner	8 x 2 x 1 tommer
Varens vægt	3.2 ounce
Batterier påkrævet	2 AA batterier (medfølger ikke)
Farve	Sort
Max understøttede enheder	6 (1 pre-programmed for Onkyo, 5 programmable)
Speciel funktion	Ergonomisk design
Fabrikant	Dan's Electronics Etc., Inc.

7. Garanti og support

For specific warranty information, please refer to the documentation included with your purchase or contact Anderic customer support directly. Anderic is a US-based company committed to providing high-quality replacement remote controls.

For further assistance, programming inquiries, or troubleshooting not covered in this manual, please visit the official Anderic webwebsted eller kontakt deres kundeserviceafdeling.

Figure 3: Anderic company logo.

Anderic RR682M