Indledning
The Aokeo AK-35 Microphone Suspension Boom Scissor Arm Stand is engineered for stability and flexibility, providing an optimal microphone positioning solution for various audio recording and broadcasting needs. Constructed from high-quality steel with an electrostatic powder coating, this stand offers enhanced durability and rust resistance. Its design incorporates super spring support, allowing for smooth and solid movement without dipping or sinking, ensuring your microphone remains precisely where you need it.
Pakkens indhold
- Aokeo AK-35 Microphone Suspension Boom Scissor Arm Stand
- Desktop Mounting Clamp
- Microphone Clip (for standard microphones)
- 3/8" to 5/8" Adapter (for wider compatibility)
- Garantikort
Opsætningsinstruktioner
Follow these steps to properly set up your Aokeo AK-35 Microphone Arm Stand:
1. Attach the Desktop Mounting Clamp
Secure the desktop mounting clamp to a sturdy surface, such as a desk or table edge. Ensure the clamp er strammet godt for at forhindre bevægelse.amp can accommodate surfaces up to 2.3 inches (6 cm) thick.
Figure 1: Attaching the desktop clamp.
2. Insert the Microphone Arm into the Clamp
Slide the base of the microphone arm into the hole on the desktop clampSpænd knappen på cl'en.amp to secure the arm. The arm's base allows for 360° rotation.
Figure 2: Inserting the microphone arm into the clamp.
3. Attach Your Microphone
The arm comes with a standard microphone clip. If your microphone (e.g., Blue Snowball, Blue Yeti) requires a different adapter, detach the included clip and use the provided 3/8" to 5/8" adapter or your microphone's specific adapter. Screw your microphone or shock mount onto the threaded screw adapter at the end of the arm.
Note:
- For Elgato Wave microphones, first install the Elgato Wave onto its shock mount, then attach the shock mount to the mic arm.
- The arm supports a maximum load of approximately 70 oz (1.8 KG).
Figure 3: Microphone compatibility and attachment.
Konfigurationsvideoguide:
Video 1: Official Aokeo AK-35 Multi-Function Microphone Arm Stand setup and usage guide.
Betjeningsvejledning
The Aokeo AK-35 arm stand offers multi-angle adjustment for optimal microphone placement.
Adjusting the Arm Position
The arm features multiple joints that can be adjusted to position your microphone precisely. The main arm sections can bend up to 180 degrees, and the microphone attachment point can rotate up to 270 degrees. The base also allows for a full 360-degree rotation.
Figure 4: Flexible adjustment points of the arm stand.
Figur 5: Detaljeret view of adjustment mechanisms.
Kabelstyring
Utilize the included velcro ties to secure your microphone cable along the arm, keeping your workspace tidy and preventing cable interference.
Opretholdelse
- Rensning: Wipe the stand with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- Ledsmøring: Periodically check the joints for smooth movement. If stiffness occurs, a small amount of silicone-based lubricant can be applied to the pivot points.
- Tæthedskontrol: Regularly inspect all screws and knobs to ensure they are securely tightened. This maintains stability and prevents accidental drops.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Microphone arm sags or does not hold position. | Joints are not tightened sufficiently; microphone is too heavy. | Ensure all adjustment knobs are securely tightened. Verify your microphone's weight does not exceed the 1.8 KG (70 oz) maximum load capacity. |
| Microphone does not fit the arm's screw adapter. | Forkert gevindstørrelse. | Use the included 3/8" to 5/8" adapter or your microphone's specific adapter. |
| Arm feels stiff or difficult to adjust. | Lack of lubrication or overtightened joints. | Loosen adjustment knobs slightly. Apply a small amount of silicone-based lubricant to the pivot points if necessary. |
| Springs are noisy during adjustment. | Normal operation, but can be reduced. | Consider sleeving the springs with heat shrink wrap or electrical tape to reduce mechanical noise. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | AK-35 |
| Materiale | Stål af høj kvalitet |
| Slutte | Electrostatic Powder Spraying |
| Max belastningskapacitet | Approx. 70 oz (1.8 KG) |
| Desktop Clamp Tykkelse | Op til 2.3 tommer (6 cm) |
| Arm Length (each section) | 350 mm (13.8 tommer) |
| Connector Type | 3/8" thread (with 5/8" adapter included) |
| Varens vægt | 1.54 pund (0.7 kg) |
| Produktdimensioner | 16 x 4 x 2 tommer |
Garanti og support
Aokeo products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included in your package. For technical support, product inquiries, or assistance with any issues, please contact Aokeo customer service through their official channels or the retailer where the product was purchased.