Nilfisk-Advance SC250

Nilfisk-Advance SC250 Batteri Mikro Skrubber Brugermanual

Model: SC250 | Brand: Nilfisk-Advance

1. Introduktion

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Nilfisk-Advance SC250 Battery Micro Scrubber. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger:

  • Læs alle instruktioner før brug.
  • Do not operate the machine without proper training.
  • Wear appropriate personal protective equipment (PPE) such as safety glasses and non-slip footwear.
  • Ensure the machine is turned off and unplugged (if applicable) before performing any maintenance or adjustments.
  • Hold børn og uautoriseret personale væk fra driftsområdet.
  • Use only manufacturer-approved parts and accessories.
  • Do not use flammable liquids or operate in explosive environments.

3. Produktet er slutview

The Nilfisk-Advance SC250 is a compact battery-powered micro scrubber designed for efficient floor cleaning. Key components include:

  • Justerbart håndtag
  • Solution Tank (1.6 gallon capacity)
  • Recovery Tank (1.6 gallon capacity)
  • Cylindrical Scrub Brush (13.5 inch cleaning path)
  • 36V lithium batteri
  • Indbygget oplader
  • Squeegee (14 inch width)
Nilfisk-Advance SC250 Battery Micro Scrubber

Image of the Nilfisk-Advance SC250 Battery Micro Scrubber, showing its compact design with an adjustable handle, solution tank, and recovery tank.

4. Opsætning

4.1. Batteriopladning

The SC250 is equipped with a 36V lithium battery and an onboard charger. Before first use, fully charge the battery.

  1. Sørg for, at maskinen er slukket.
  2. Tilslut netledningen til en passende stikkontakt.
  3. Opladningsindikatoren lyser. En fuld opladning tager typisk cirka 6 timer.
  4. Afbryd opladeren, når opladningen er fuldført.

Note: The charger may become warm during operation. This is normal. Do not obstruct ventilation around the charger.

4.2. Brush Installation

The SC250 uses a medium-duty white cylindrical brush.

  1. Tilt the machine backward to access the brush deck.
  2. Align the cylindrical brush with the brush housing.
  3. Push the brush firmly into place until it locks.
  4. Ensure the brush is securely seated before operating.

4.3. Fyldning af vaskemiddeltanken

  1. Locate the solution tank fill port.
  2. Fill the tank with clean water and an appropriate, low-foaming floor cleaning solution, following the detergent manufacturer's dilution instructions. Do not overfill.
  3. Securely close the fill port cap.

5. Betjeningsvejledning

5.1. Kontroller før drift

  • Sørg for, at batteriet er fuldt opladet.
  • Verify the brush is correctly installed.
  • Check that the solution tank is filled.
  • Clear the floor of any large debris that could clog the machine or damage the brush.

5.2. Starting and Cleaning

  1. Tænd maskinen ved hjælp af hovedafbryderen.
  2. Engage the brush and solution flow controls.
  3. Begin cleaning by walking at a steady pace, guiding the machine in overlapping passes.
  4. For optimal results, operate in straight lines. When making turns, ensure any excess water is vacuumed up to prevent puddling.
  5. The machine has a run time of up to 40 minutes per tank/charge.

5.3. Emptying the Recovery Tank

Empty the recovery tank when it is full or after each use.

  1. Sluk for maskinen.
  2. Locate the recovery tank drain hose.
  3. Direct the hose into a suitable drain or disposal area.
  4. Open the drain cap to empty the dirty water.
  5. Rinse the recovery tank with clean water to prevent odor and residue buildup.
  6. Close the drain cap securely.

6. Vedligeholdelse

6.1. Efter hver brug

  • Empty and rinse both the solution and recovery tanks.
  • Clean the squeegee blades and check for wear. Replace if damaged.
  • Remove and rinse the cylindrical brush. Allow it to air dry.
  • Tør maskinens ydre af med adamp klæde.

6.2. Regelmæssig vedligeholdelse

  • Batteripleje: Recharge the battery after each use. Store the machine with a charged battery. If storing for extended periods, charge the battery every 3 months.
  • Rengøring af slange: Regularly inspect and clean the suction hose, especially if operating in environments with hair or fibrous debris, to prevent clogs. Disassemble the relevant sections to clear blockages.
  • Børsteinspektion: Periodically check the brush for wear and replace it when bristles are significantly worn.

7. Fejlfinding

ProblemMulig årsagLøsning
Maskinen starter ikkeBattery discharged; Power switch offCharge battery; Turn on power switch
Poor water pickup (streaking)Squeegee blades worn or dirty; Recovery tank full; Suction hose cloggedClean/replace squeegee blades; Empty recovery tank; Clear suction hose
No solution dispensedSolution tank empty; Solution flow control off; Clogged solution lineFill solution tank; Turn on solution flow; Clear solution line
Reduceret køretidBattery not fully charged; Battery agingEnsure full charge; Consider battery replacement if performance significantly degrades

8. Specifikationer

  • Model: SC250
  • Mærke: Nilfisk-Advance
  • Løsningstankkapacitet: 1.6 liter
  • Indvindingstankens kapacitet: 1.6 liter
  • Rengøringsstibredde: 13.5 inches (cylindrical scrub brush)
  • Batteri: 36V Lithium, 7.8 Ah
  • Oplader: Ombord
  • Weight (with battery & empty tanks): 55.5 lbs.
  • Sound Noise Level: 66 dBA
  • Skraberbredde: 14 tommer
  • Køretid: Op til 40 minutter pr. opladning
  • Børstetype: Medium Duty White Cylindrical
  • Farve: Hvid
  • Håndtag Materiale: Plast
  • Overfladeanbefaling: Etage

9. Garanti og support

For warranty information, technical support, or to order replacement parts, please contact Nilfisk-Advance customer service or visit their official webwebstedet. Behold din købskvittering som købsbevis.

Fabrikant: Nilfisk Advance

UPC: 647732990768

© 2023 Nilfisk-Advance. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.