InstallGear nøglefri adgangssystem brugermanual

Indledning

The InstallGear Keyless Entry System provides convenient and secure remote access to your vehicle's central locking system. This kit includes two 3-button remotes and four door actuators, designed for universal application in cars, autos, and trucks. It allows for seamless locking and unlocking, remote trunk release, and visual confirmation of system engagement.

Important Note: This is a highly technical product. Professional installation by an individual with extensive knowledge in car door locks and automotive electrical systems is strongly recommended to ensure proper function and safety.

Sikkerhedsoplysninger

• Frakobl altid køretøjets batteri, før du påbegynder elektrisk installation, for at undgå kortslutninger og elektrisk stød.
• Ensure all wiring connections are secure and properly insulated to prevent short circuits, fire hazards, and system malfunctions.
• Route wires away from moving parts, sharp edges, and heat sources to prevent damage.
• Use appropriate fuses as specified in the wiring diagram to protect the system and vehicle's electrical components.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret biltekniker.

Pakkens indhold

Bekræft, at alle nedenstående komponenter er til stede i din pakke:

Figur 1: Komplet sætindhold

• 1x Main Unit Control Module
• 2x 3-knaps fjernbetjeninger
• 1x ledningsnet
• 4x Door Lock Actuators (including one 5-wire master actuator and three 2-wire slave actuators)
• Mounting Hardware (brackets, rods, screws)

Opsætning og installation

Installation of the InstallGear Keyless Entry System requires knowledge of automotive electrical systems and mechanical aptitude. Refer to the wiring diagram provided and your vehicle's specific wiring schematics for accurate connections.

Ledningsdiagram overview

Figur 2: Systemledningsdiagram

The diagram illustrates the connections between the main unit, the vehicle's battery, the door lock actuators, and optional accessories like parking lights and trunk release.

Nøgleledningsforbindelser

• Rød ledning: Connect to a constant +12V DC power source (e.g., vehicle battery or fuse box) with an inline fuse.
• Sort ledning: Tilslut til køretøjets chassis jord.
• Blue & Green Wires: These pairs connect to each door actuator. Ensure correct polarity for lock/unlock action. If the default action is reversed, you may need to swap these wires at the actuator.
• Master Actuator (5-wire): The master actuator (typically for the driver's door) has additional Black, White, and Brown wires. These communicate the manual lock/unlock status to the main unit, allowing all other doors to synchronize.
• Violet (Purple) Wires: These wires are for connecting to your vehicle's signaling lights (e.g., turn signals or parking lights) to provide visual confirmation of lock/unlock. Diodes are included to prevent back-feeding.
• Amber (Orange) Wire: This wire provides a low-current pulse for remote trunk release. It is recommended to connect this to a relay coil, which then controls a higher-current trunk release actuator. Direct connection to an actuator may damage the unit.
• White & Brown (Extra Wires): These are for optional manual lock/unlock switches. Connect a momentary switch between Brown and ground for unlock, and White and ground for lock.

Mekanisk installation

Mount the actuators securely within the door panels. The included brackets and rods may need to be bent or cut to fit your specific vehicle's door mechanism. Ensure the actuator rod moves freely and aligns properly with the factory lock rod to prevent binding and ensure smooth operation. Test the mechanical movement before finalizing electrical connections.

Betjeningsvejledning

Once installed, the system is operated using the provided 3-button remote controls.

Fjernbetjeningsfunktioner

Figure 3: Remote Controls

• Låseknap (🔒): Press once to lock all doors. The vehicle's lights will flash once to confirm. If the vehicle is already locked and you press the button again, the lights will flash five times.
• Oplåsningsknap (🔓): Press once to unlock all doors. The vehicle's lights will flash twice to confirm.
• Knap til udløser af bagagerum (🚗💨): Press and hold for approximately 2.5 seconds to activate the remote trunk release. This sends a brief pulse to the amber wire.

Figure 4: Keyless Convenience and Trunk Access

Opretholdelse

The InstallGear Keyless Entry System is designed for long-lasting performance with minimal maintenance.

• Batterier til fjernbetjening: If the remote's range decreases or it becomes unresponsive, replace the battery. Refer to the remote's casing for battery type (typically a coin cell battery).
• Ledningsinspektion: Periodically inspect all wiring connections for signs of wear, corrosion, or loose connections. Ensure all wires are securely routed and protected.
• Aktuatorfunktion: Listen for smooth operation of the actuators. If you notice any unusual noises or sluggish movement, inspect the mechanical linkage for obstructions or misalignment.

Fejlfinding

If you encounter issues with your keyless entry system, consider the following common troubleshooting steps:

If problems persist after attempting these solutions, it is recommended to consult a professional automotive electrician.

Specifikationer

• Fabrikant: Installer Gear
• Modelnummer: IGCLS
• Varens vægt: 2.07 pund
• Pakkedimensioner: 11.02 x 7.44 x 2.68 tommer
• Kompatible enheder: Biler, lastbiler
• Fjernbetjening inkluderet: Ja (To fjernbetjeninger med 3 knapper)
• ASIN: B01MDLUTPC
• Dato først tilgængelig: 13. oktober 2016

Garanti og support

For warranty information or technical support, please contact InstallGear directly through their official webwebstedet eller forhandleren, hvor produktet blev købt. Gem din købsbevis i tilfælde af garantikrav.

Besøg InstallGear-butikken på Amazon for mere information.