Steinel L 240 S LED Outdoor Wall Light with Motion Sensor

1. Introduktion

Thank you for choosing the Steinel L 240 S LED Outdoor Wall Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new outdoor lighting solution. Please read these instructions carefully before beginning installation or use, and keep them for future reference.

2. Sikkerhedsinstruktioner

• Elektrisk installation: Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med nationale ledningsføringsforskrifter og lokale el-forskrifter.
• Strømafbrydelse: Always disconnect the power supply before performing any work on the light fixture.
• Voltage: Sørg for, at forsyningen voltage matches the specifications of the light (230 Volts).
• Skade: Do not operate the light if it is damaged. Contact customer service for assistance.
• Ændringer: Produktet må ikke ændres på nogen måde. Uautoriserede ændringer kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
• Driftsmiljø: This product is designed for outdoor use and is water-resistant (IP44). Do not submerge it in water.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede før installation:

• Steinel LED Outdoor Light L 240 S
• Mounting material (4 x screws, 4 x wall plugs, 4 x spacers, 2 x securing screws, sealing plug)
• Masking plates for sensor adjustment
• Instruktionsmanual

4. Produktet er slutview og funktioner

The Steinel L 240 S is an efficient LED outdoor wall light featuring an integrated infrared motion sensor. It provides optimal illumination for entrances and patios with a warm-white light (3000 Kelvin).

Nøglefunktioner:

• Optimal belysning: Efficient Steinel LEDs provide 946 lumens of warm-white light (3000K).
• Pålidelig detektion: 180-degree infrared sensor with a detection range of up to 10 meters.
• Lang levetid: LEDs designed for approximately 30 years of use, eliminating the need for frequent bulb replacement.
• Holdbar konstruktion: Impact-resistant LED wall light with a stainless steel panel.
• Justerbar sensor: Sensor can be rotated vertically by 90 degrees for precise detection area targeting.
• Indstillinger, der kan tilpasses: Stepless adjustment of light duration and brightness (twilight threshold).
• Energieffektivitet: Contains a light source of energy efficiency class D.

5. Installation

The Steinel L 240 S LED Outdoor Wall Light is designed for straightforward installation, similar to conventional light fixtures. However, for safety and optimal performance, professional installation by a qualified electrician is highly recommended.

Installationstrin:

1. Forbered installationsstedet: Choose a suitable location on an outdoor wall. Ensure the power supply to the installation area is switched off at the main circuit breaker.
2. Markér borepunkter: Use the light fixture as a template to mark the drilling points on the wall.
3. Bor huller og indsæt plugs: Bor huller på de markerede punkter, og isæt de medfølgende vægdyvler.
4. Tilslut ledninger: Connect the electrical wires (Live, Neutral, Earth) to the corresponding terminals in the light fixture. Ensure all connections are secure.
5. Monter armaturet: Secure the light fixture to the wall using the provided screws and spacers.
6. Gendan strøm: Once the light is securely mounted and wired, restore power at the main circuit breaker.

After installation, proceed to adjust the sensor settings as described in Section 7.

6. Betjening

The Steinel L 240 S LED Outdoor Wall Light operates automatically based on motion detection and ambient light levels. When the sensor detects movement within its detection range and the ambient light falls below the set twilight threshold, the light will switch on for the pre-configured duration.

7. Justering af indstillinger

The light offers several adjustable settings to customize its behavior:

• Sensorrotation: The infrared sensor can be rotated vertically by 90 degrees. This allows you to precisely define the detection area and avoid unwanted triggers.
• Tidsindstilling: Adjust the duration the light remains on after motion detection. This setting is stepless, allowing fine-tuning.
• Tusmørkegrænse: Set the ambient brightness level at which the motion sensor becomes active. This is also a stepless adjustment.
• Masking Plates: Use the included masking plates to further restrict the sensor's detection area, for example, to exclude public pathways or neighboring properties.

8. Vedligeholdelse

The Steinel L 240 S LED Outdoor Wall Light requires minimal maintenance.

• Rensning: Clean the light fixture regularly with a soft, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen.
• LED levetid: The integrated LEDs have a long lifespan (approx. 30 years), meaning there is no need to replace bulbs.
• Inspektion: Periodically check the light for any signs of damage or wear. If any issues are found, disconnect power and contact customer service.

9. Fejlfinding

If you experience issues with your Steinel L 240 S, refer to the following troubleshooting guide:

10. Specifikationer

11. Garanti og support

Steinel products are known for their quality and reliability. This product comes with a 3 års producentgaranti, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any questions regarding your Steinel L 240 S LED Outdoor Wall Light, please contact Steinel customer service. You can find contact information on the official Steinel webhjemmeside eller gennem din forhandler.

Tysk teknik: Designed in Germany, Steinel products are developed to provide energy efficiency, comfort, and safety.