Aokeo AK-60 Professional USB Streaming Podcast PC Microphone Instruction Manual

1. Produktet er slutview

The Aokeo AK-60 is a professional USB condenser microphone kit designed for streaming, podcasting, gaming, recording, and voice-over applications. It features a unidirectional polar pattern for focused sound capture and comes with essential accessories for a complete setup.

Figure 1: Aokeo AK-60 Professional USB Streaming Podcast PC Microphone Kit, including microphone, stand, pop filter, and shock mount.

2. Pakkens indhold

• Aokeo AK-60 Condenser Microphone
• AK-35 Suspension Scissor Arm Stand
• Shock Mount
• Popfilter
• Foam Cover (Windscreen)
• USB kabel
• USB Sound Card (for phantom power if not provided by soundboard)
• XLR til 3.5 mm kabel
• Skrivebord Clamp
• Garantikort

3. Opsætningsvejledning

1. Vedhæft skrivebordskl.amp: Fastgør skrivebordet clamp to the edge of your desk or table. Ensure it is tightened firmly to provide a stable base for the microphone arm.
2. Install Scissor Arm Stand: Insert the base of the AK-35 Suspension Scissor Arm Stand into the hole on the desk clampSpænd knappen på cl'en.amp to hold the arm securely in place.
3. Mount Shock Mount: Screw the shock mount onto the threaded bolt at the end of the scissor arm stand.
4. Indsæt mikrofon: Gently squeeze the shock mount and carefully insert the Aokeo AK-60 Condenser Microphone into the mount. Release the mount to secure the microphone.
5. Fastgør popfilter: Clamp the pop filter onto the microphone arm. Position it approximately 2-3 inches in front of the microphone to reduce plosive sounds (P's and B's).
6. Apply Foam Cover: (Optional) Slide the foam cover over the microphone for additional wind and breath noise reduction.
7. Tilslut kabler:
   • Connect the XLR end of the provided cable to the bottom of the microphone.
   • Connect the 3.5mm end of the cable to the USB sound card.
   • Plug the USB sound card into an available USB port on your computer (PC or Laptop).
   • Alternatively, if your soundboard or audio interface supports phantom power, connect the XLR cable directly to it.

4. Betjeningsvejledning

1. Tænd: Once connected via USB, your computer should automatically detect the microphone. No additional drivers are typically required (plug-and-play).
2. Vælg mikrofonindgang: Go to your computer's sound settings and select the Aokeo AK-60 (or generic USB Audio Device) as your input device.
3. Juster indgangsniveau: Adjust the microphone input level in your computer's sound settings or your recording software to achieve optimal volume without distortion.
4. Placering: Position the microphone directly in front of your mouth, ideally 6-12 inches away. The unidirectional polar pattern is designed to pick up sound primarily from the front, minimizing background noise.
5. Use Pop Filter/Foam Cover: Always use the pop filter and/or foam cover to minimize plosives (harsh 'P' and 'B' sounds) and breath noises, ensuring clearer audio.
6. Monitoring (Optional): If using the USB sound card, you may be able to plug headphones into its headphone jack to monitor your audio directly.

The AK-35 suspension scissor arm stand allows for flexible positioning, ensuring the microphone is always at the optimal distance and angle for your recording needs, enhancing comfort and sound quality.

5. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the microphone body and stand. Avoid using liquid cleaners directly on the microphone.
• Pop Filter/Foam Cover: The pop filter and foam cover can be gently cleaned with a damp klud om nødvendigt. Sørg for, at de er helt tørre, før de sættes på igen.
• Opbevaring: When not in use, store the microphone in a clean, dry place to protect it from dust and moisture.
• Kabelpleje: Undgå skarpe bøjninger eller knæk på kablerne for at forhindre skader.

6. Fejlfinding

• Ingen lyd/lav lydstyrke:
  • Sørg for, at alle kabler er korrekt tilsluttet.
  • Verify the microphone is selected as the input device in your computer's sound settings.
  • Check the input level in your computer's sound settings or recording software.
  • Confirm your computer or soundboard is providing sufficient power (phantom power or plug-in power) to the microphone. Condenser microphones require external power to operate.
• Buzzing/Humming Noise:
  • This can sometimes be caused by interference from other electronic devices or poor grounding. Try connecting the microphone to a different USB port or power outlet.
  • Ensure the cables are not running parallel to power cables.
  • Some users have reported issues with the included USB sound card causing high-pitched buzzing. If this occurs, consider using a dedicated audio interface with phantom power or a different USB sound card.
• Microphone Stand Instability:
  • Sørg for, at skrivebordet klamp is tightened securely to the desk.
  • Check all joints and knobs on the scissor arm stand to ensure they are tightened.
  • If the desk clamp breaks (as noted in some user experiences), it may need to be replaced with a more robust alternative.

7. Specifikationer

8. Garanti og support

The Aokeo AK-60 microphone kit typically comes with a 30 dages garanti og en et års garanti. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or contact Aokeo customer service directly through their official webwebstedet eller forhandleren, hvor produktet blev købt.