Ecolight 12-tommer batteridrevet LED-hanelampe, brugsanvisning

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Ecolight 12-inch Battery-Operated LED Tap Bar Light. This product is designed to provide convenient, wire-free illumination for various indoor applications such as under cabinets, workspaces, closets, and recreational areas. Please read this manual thoroughly before use and retain it for future reference.

2. Sikkerhedsoplysninger

• This product is intended for indoor use only. Do not expose to moisture or extreme temperatures.
• Bland ikke gamle og nye batterier eller forskellige typer batterier (f.eks. alkaliske og genopladelige).
• Sørg for, at batterierne vender rigtigt (+/-). Forkert isætning kan forårsage skader.
• Fjern batterierne, hvis lyset ikke skal bruges i længere tid, for at forhindre lækage.
• Opbevar batterier utilgængeligt for børn.
• Do not attempt to disassemble or modify the light bar. This will void the warranty and may cause damage or injury.
• Use only the mounting hardware provided or suitable alternatives for secure installation.

3. Hvad er inkluderet

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1 x Ecolight 12-inch LED Tap Bar Light
• 6 x AA batterier
• 4 x Command™ Picture Hanging Strips
• 2 x monteringsskruer

Image 3.1: Contents of the package, including the light bar, batteries, Command strips, and screws.

4. Installation

4.1 Batteriinstallation

1. Locate the battery compartment cover on the back of the light bar.
2. Skub eller afklips dækslet for at åbne rummet.
3. Isæt 6 AA-batterier, og sørg for at polerne (+ og -) vender korrekt som angivet inde i batterirummet.
4. Sæt batterirummets dæksel på igen.

4.2 Monteringsmuligheder

The Ecolight LED Tap Bar Light offers two mounting methods:

• Temporary/Damage-Free Mounting: Using Command™ Picture Hanging Strips. Ideal for surfaces where you want to avoid holes.
• Permanent montering: Using the provided screws. Provides a more secure, long-term installation.

4.2.1 Mounting with Command™ Strips

1. Clean the mounting surface with rubbing alcohol and let it dry completely. Do not use household cleaners.
2. Separate the Command™ Strips. Press two strips together until they click. Repeat for the other two strips.
3. Remove the red liner from one side of each pair of strips and press them firmly onto the back of the light bar.
4. Remove the black liner from the other side of each pair of strips.
5. Align the light bar with the desired mounting location and press firmly against the surface for 30 seconds.
6. To ensure adhesive strength, remove the light bar by pulling it up and away from the strips. Press the strips firmly against the wall for another 30 seconds.
7. Wait 1 hour before reattaching the light bar to the strips.

4.2.2 Mounting with Screws

1. Identify the two keyhole slots on the back of the light bar.
2. Hold the light bar in the desired mounting location and mark the positions for the two screws through the keyhole slots.
3. Drill pilot holes at the marked locations if necessary.
4. Insert the provided screws into the pilot holes, leaving a small portion of the screw head exposed.
5. Align the keyhole slots on the back of the light bar with the exposed screw heads and slide the light bar down to secure it.
6. Tighten the screws if the light bar feels loose, but do not overtighten.

Image 4.1: Product dimensions for planning installation space.

Billede 4.2: Eks.ample of the light bar installed under a cabinet.

5. Betjening

5.1 Tænd/sluk

The Ecolight LED Tap Bar Light features a simple tap activation. To turn the light ON or OFF, gently tap the translucent lens on the front of the light bar.

Image 5.1: Tap On/Off activation method.

5.2 Timerindstillinger

The light bar includes a built-in auto-off timer to conserve battery life. The timer switch is located on the side of the unit. You can select from the following modes:

• PÅ: The light remains continuously on until manually turned off.
• 1 MIN.: The light automatically turns off after 1 minute.
• 5 MIN.: The light automatically turns off after 5 minutes.
• 15 MIN.: The light automatically turns off after 15 minutes.

To manually turn off the light when a timer setting is active, tap the bar a second time.

Image 5.2: Timer setting switch on the light bar.

6. Vedligeholdelse

6.1 Rengøring

To clean the light bar, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or sprays, as these may damage the finish or internal components.

6.2 Udskiftning af batteri

When the light output diminishes, it is time to replace the batteries. Follow the battery installation steps (Section 4.1) to replace all 6 AA batteries with new ones. Always replace all batteries at the same time and use the same type of battery.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

9.1 Garantioplysninger

This Ecolight product is covered by a 6 års begrænset garanti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader som følge af misbrug, ulykker, ændringer eller uautoriseret reparation. Gem venligst din købsbevis i tilfælde af garantikrav.

9.2 Kundesupport

If you have any questions, require assistance, or encounter issues not covered in this manual, please contact Ecolight customer support. Refer to the product packaging or the official Ecolight webhjemmeside for aktuelle kontaktoplysninger.